Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial Yeti
Loading

Notices

Thread: Strc lower links

Reply
 
LinkBack Thread Tools Display Modes
Old 05-22-2015, 04:15 PM   #1
I wanna be Dave
 
Join Date: Sep 2004
Posts: 2,386
Default Strc lower links

has anyone had or having issues with pulling the plastic ends off the strc lower links? i just bought a pair and people are already telling me i should of went with a one piece design.

thanks
twisted is offline   Reply With Quote
Sponsored Links
Old 05-22-2015, 05:08 PM   #2
Rock Stacker
 
Join Date: Aug 2007
Location: Canada
Posts: 86
Default Re: Strc lower links

i am mid build of my kit... i have those on my bench for this build. i got the upper and lower rears to go in. So far the plastics in this kit i am less than impressed with. I think ill be looking at different plastic ends soon
TKG26 is offline   Reply With Quote
Old 05-22-2015, 05:33 PM   #3
I wanna be Dave
 
Join Date: Sep 2004
Posts: 2,386
Default Re: Strc lower links

i just put the plastic ends onto the strc lower links. i added a little CA to the threads of the set screw that goes into the plastic. there isnt much meat around the ball itself so i could see them breaking there.
twisted is offline   Reply With Quote
Old 05-23-2015, 05:55 PM   #4
I wanna be Dave
 
Join Date: Sep 2004
Posts: 2,386
Default Re: Strc lower links

had a failure with the new links within 5 minutes of 1st run with them.

twisted is offline   Reply With Quote
Old 05-23-2015, 09:28 PM   #5
Rock Crawler
 
Join Date: Sep 2011
Location: truckee
Posts: 918
Default Re: Strc lower links

If I was you and I wanted to make those work, I'd drill and tap the ends of the trailing arms to 4mm and get some revo rod ends and 4mm grub screws.

If it was me, I'd get the UCFAB or VP and be done with it.
ninja turtle is offline   Reply With Quote
Old 05-23-2015, 10:47 PM   #6
Quarry Creeper
 
Join Date: Feb 2012
Location: Verdi, Nevada
Posts: 400
Default Re: Strc lower links

Ucfab all the way!! They are sooooo nice. Mine make me smile every time I see them. But you will need revo 4mm ends for impact at good speed
trig n tahoe is offline   Reply With Quote
Old 05-24-2015, 09:43 PM   #7
I wanna be Dave
 
Join Date: Sep 2004
Posts: 2,386
Default Re: Strc lower links

i bought some UCfab arms.
twisted is offline   Reply With Quote
Reply



Strc lower links - Similar Threads
Thread Thread Starter Forum Replies Last Post
STRC Wraith Upper/Lower aluminum links in stock RPP Hobby RPP Hobby 2 09-28-2011 04:12 PM
strc tranny plate with inboard lower links... drilldeep Axial AX-10 Scorpion 23 08-03-2008 09:12 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 07:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com