|
| LinkBack | Thread Tools | Display Modes |
09-28-2015, 01:17 PM | #1 |
Rock Stacker Join Date: Jul 2015 Location: California
Posts: 75
| Receiver for Yeti and Transmitter Compatibility
Hey all! Finally just pulled the trigger on a 1/10 Yeti kit after having a blast working on my SCX10 for a few months. Going to be running a brushless set up and hopefully using a 3S battery. With my SCX10 I received a Tactic TTX300 transmitter, which for my purposes has been excellent. Can I use this same Transmitter, barring some trim/setting adjustments, or do I have to get another transmitter for the new car? Is the Transmitter mated to the receiver when you turn them on in sequence nearby? Also looking for a good recommendation on a 3-channel receiver under $80.00. The "AR-3" that came on my SCX10 was great, but looks like it's a rebranded one from another company and I can't buy it through my dealer! Thanks for the help, stoked to get going on this new project. |
Sponsored Links | |
09-28-2015, 03:02 PM | #2 |
Newbie Join Date: Jul 2014 Location: Australia
Posts: 14
| Re: Receiver for Yeti and Transmitter Compatibility
If you buy a compatible receiver you will be able to bind it to your transmitter. The issue will be that the yeti receiver is in a waterproof housing requiring 4 screws to access each time you want to bind. Depends how often you want to change trucks I guess. Also, sometimes you can buy a transmitter / receiver combo for a few dollars more than the receiver alone. |
09-28-2015, 08:36 PM | #3 |
Rock Crawler Join Date: Oct 2013 Location: Wiscasset, ME
Posts: 623
| Re: Receiver for Yeti and Transmitter Compatibility
look at hobbyking.com or hobbypartz.com The Turnigy / Flysky stuff it good enough for what I need. It's all I use. GT3B and the GT3C You can also buy them from a vendor on here called Losikid He hacks them and they become extremely capable. I've got 2 Turnigy GT3B's and I got the hack kit. I can run 8 channels if I wanted to. All under your $80 price point. |
09-29-2015, 11:23 AM | #4 |
Pebble Pounder Join Date: Dec 2014 Location: Duluth
Posts: 114
| Re: Receiver for Yeti and Transmitter Compatibility
If you like your tactic, you could buy another TTX300 with an RX for $40. TowerHobbies.com | Tactic TTX300 3-Channel SLT System |
09-29-2015, 01:08 PM | #5 |
Rock Stacker Join Date: May 2015 Location: Saint Louis, MO
Posts: 58
| Re: Receiver for Yeti and Transmitter Compatibility
FWIW the AR-3 receiver that came with my RTR Yeti looks a lot like the little FlySky GR3 series RX's I buy for $7-8 on ebay. It (the AR-3) bound to my FlySky GT3C transmitter. Which is nice because the GT3C is a 3-channel TX, also supports multiple models so you don't have to re-bind when you switch from one vehicle to another, just select different model on the screen. I haven't tried yet, but I'll bet you could bind a GR3 series FlySky RX to the AX-3 Axial TX. |
Receiver for Yeti and Transmitter Compatibility - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Axial Yeti - Critical Dimensions, Parts compatibility, Gearing etc | Harley | Axial Yeti | 190 | 07-09-2019 05:35 PM |
Airtronics receiver compatibility | Scottmisfits | Electronics | 0 | 12-26-2010 02:20 PM |
3PM 2.4 receiver compatibility? | AgentXXX | Electronics | 2 | 12-01-2009 05:46 PM |
Transmitter/receiver compatibility | SeanD | Newbie General | 14 | 06-21-2007 12:51 PM |
Transmitter/receiver $65?????? | Double J | Electronics | 9 | 04-15-2006 04:01 AM |
| |