Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial Yeti


Thread: Yeti Kit rear driveshaft binding?

LinkBack Thread Tools Display Modes
Old 01-13-2016, 07:23 AM   #1
Join Date: Dec 2015
Location: UK
Posts: 20
Default Yeti Kit rear driveshaft binding?

I am just building the Kit version and have assembled the transfer box, when connecting the rear driveshaft onto the transfer box tightening the grub screw causes the drive (cup?) to bind badly on the gearbox to the point I can hardly turn it by hand?

Anyone else have this issue? I took the gearbox apart and checked its been assembled with the gear shaft round the right way and looks fine, didn't want to have to trim the driveshaft cup if someone else had any options?
Mattwarner is offline   Reply With Quote
Sponsored Links
Old 01-13-2016, 07:26 AM   #2
Pebble Pounder
Join Date: Nov 2015
Location: Switzerland
Posts: 112
Default Re: Yeti Kit rear driveshaft binding?

Yes, i had this issue as well. I put some shims on... think it was 0.6mm
RCO is online now   Reply With Quote

Yeti Kit rear driveshaft binding? - Similar Threads
Thread Thread Starter Forum Replies Last Post
Yeti Kit Rear Driveshaft Issue stone202 Axial Yeti 8 11-13-2015 10:18 AM
Yeti kit rear dif. mesh KellyC Axial Yeti 8 04-13-2015 05:00 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -6. The time now is 07:21 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com