re: Life of one YETI - Tom Frajer's Axial Yeti build log I tried to assemble new Currie centered pumpkin rear axle together with Incision locker and original bevel gear (38T - AX30395) that was installed in old plastic axle. To my big surprise, this did not went together at all :shock: Problem is, that incision locker is little wider than original plastic locker (AX80002). Interesting is that on Vanquish product pages there is mentioned in descriptions, that Currie axle should fit Incision locker together with original gears. am i missing something? For now, I will use plastic locker - this is perfect fit into the Currie... |
re: Life of one YETI - Tom Frajer's Axial Yeti build log Quote:
|
re: Life of one YETI - Tom Frajer's Axial Yeti build log Quote:
http://uploads.tapatalk-cdn.com/2016...5d33fb1e41.jpg http://uploads.tapatalk-cdn.com/2016...529e2e2e6a.jpg |
re: Life of one YETI - Tom Frajer's Axial Yeti build log Currie centered pumkin axle assembly... http://uploads.tapatalk-cdn.com/2016...b2c9dac84b.jpg Had to file C-rings little bit... http://uploads.tapatalk-cdn.com/2016...2a8cd943c3.jpg http://uploads.tapatalk-cdn.com/2016...1898505db8.jpg Filled with silicone grease to not leave any room for water leaking in. Runs pretty smooth and easy so I hope it will not put any strain on motor. http://uploads.tapatalk-cdn.com/2016...822710d803.jpg And here is finished beauty [emoji6] http://uploads.tapatalk-cdn.com/2016...2db32c9fa0.jpg |
re: Life of one YETI - Tom Frajer's Axial Yeti build log Might be the picture but they look about the same to me. The stock unit has a gasket between the housing and the gear. This is removed when using aftermarket lockers. With it, the setup will be too wide. |
re: Life of one YETI - Tom Frajer's Axial Yeti build log Quote:
|
re: Life of one YETI - Tom Frajer's Axial Yeti build log Quote:
|
re: Life of one YETI - Tom Frajer's Axial Yeti build log Flipping front diff... http://uploads.tapatalk-cdn.com/2016...952a21d38a.jpg http://uploads.tapatalk-cdn.com/2016...f91e96f358.jpg 500.000 wt oil into the differential to tighten it but not lock... http://uploads.tapatalk-cdn.com/2016...03aa65a494.jpg http://uploads.tapatalk-cdn.com/2016...7680435cbc.jpg And then filling whole assembly with silicone grease... http://uploads.tapatalk-cdn.com/2016...087fcc0bb6.jpg http://uploads.tapatalk-cdn.com/2016...8c036fae77.jpg That is all for today :) http://uploads.tapatalk-cdn.com/2016...91f337bb0e.jpg |
re: Life of one YETI - Tom Frajer's Axial Yeti build log RPM arms with front GPM antri roll bar in place... http://uploads.tapatalk-cdn.com/2016...922667b17d.jpg Vanquish knuckles and caster blocks with Incision VDI... http://uploads.tapatalk-cdn.com/2016...9bc2bc1819.jpg Had bad luck. One of the caster blocks delivered by Vanquish is either different type or unfinished - there is missing hole for the bottom pin :( I will ask for replacement... http://uploads.tapatalk-cdn.com/2016...1f11edd886.jpg |
re: Life of one YETI - Tom Frajer's Axial Yeti build log Good news, another batch of parts arrived! Rear trailing arms + mounts, rear sway bar + mounts and Team DC aluminium skidplate! http://uploads.tapatalk-cdn.com/2016...0761f6c1b1.jpg |
re: Life of one YETI - Tom Frajer's Axial Yeti build log Team DC skidplate looks very good! http://uploads.tapatalk-cdn.com/2016...5bf7c25e01.jpg http://uploads.tapatalk-cdn.com/2016...5ca04f8f7b.jpg |
re: Life of one YETI - Tom Frajer's Axial Yeti build log Just placed new order on Team Integy's website. Im awaiting following cool upgrade parts: Billet Machined Front Bulkhead (Black) Billet Machined Spur Gear Cover Assembly (Silver) Billet Machined Gearbox Case Set (Silver) Billet Machined Alloy+CF Rear Cage Stiffener (Black) Billet Machined Spring Loaded Front Bumper Mount Kit (Black) Billet Machined Upper Deck Brace (Black) Billet Machined Front Bumper Set w/ LED Lights (Black) |
re: Life of one YETI - Tom Frajer's Axial Yeti build log Wont all that lube on the front diff gears just seep out all over the tub? |
re: Life of one YETI - Tom Frajer's Axial Yeti build log Quote:
|
re: Life of one YETI - Tom Frajer's Axial Yeti build log |
re: Life of one YETI - Tom Frajer's Axial Yeti build log Hahaha, this is very funny, now I know why I lost my right swaybar during first RTR drive. There is no threading on the right side! Shoud I ask Axial for replacement? This is second dissapointment from Axial after water leaking into "waterproof" receiver box causing it's malfunction. Yeti is fun car, but stock RTR version is really poor... http://uploads.tapatalk-cdn.com/2016...17205f1553.jpg |
re: Life of one YETI - Tom Frajer's Axial Yeti build log Quote:
|
re: Life of one YETI - Tom Frajer's Axial Yeti build log great thread! "thumbsup""thumbsup" |
re: Life of one YETI - Tom Frajer's Axial Yeti build log Quote:
|
re: Life of one YETI - Tom Frajer's Axial Yeti build log Quote:
|
All times are GMT -6. The time now is 04:56 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com