Shock Upgrade Hey all, new guy here, I just picked up the Axial Yeti SCORE TT kit, and I was wondering if I can put 16mm shocks on it? Haven't really been able to get a good answer on this question. Figured this was the right place for the answer. Example of the shocks I'm talking about is something like the Tekno SCT 410.3 shocks Thanks |
Re: Shock Upgrade Doubt it. At least with the stock configuration. Most if not all of the shocks Ive tried, the springs have slightly rubbed or almost rubbed the front axles. The rear may be a different story. With some upper mounting plates, you could probably get em to fit without much hassle. |
Re: Shock Upgrade I see what you mean about the clearance, I guess I'll go with Pro Spec on the front and the Power Stroke XT on the rear |
Re: Shock Upgrade I run some old long Ofna 1/8 shocks on the rear that I had lying around. Work great. I also run Associated SC10 4x4 FT front shocks. They are 13mm and fit without rubbing. |
Re: Shock Upgrade In that case maybe I'll go Pro Spec Front and some 122mm Tekno in the Rear |
Re: Shock Upgrade Tekno shocks are sweet. I was going to put some ET48 shocks on my XL but lost interest. I run a few Tekno trucks and they are by far my favorite shocks. |
Re: Shock Upgrade I run a SCT 410.3, I love it |
Re: Shock Upgrade You can. I run a yeti XL shock in the back. it will fit |
All times are GMT -6. The time now is 01:30 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com