RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial Yeti (http://www.rccrawler.com/forum/axial-yeti/)
-   -   Axial 1/18 Yeti (and Yeti Score) (http://www.rccrawler.com/forum/axial-yeti/574516-axial-1-18-yeti-yeti-score.html)

Brake Weight 11-17-2016 02:34 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
http://uploads.tapatalk-cdn.com/2016...77ca8e9fcb.jpg

Sneetches 11-17-2016 03:08 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
My only experience with 1/18 so far is a Dromida SC truck which is incredibly strong for whatever reason. I've launched that thing 10 feet high a couple dozen times and whether I land on the roof, all fours, sideways, etc, nothing has happened yet. It's a pretty nice parking lot racer with the brushless system and gets about 15 minutes of hard driving on some 1200mAh 2S packs, top speed is about 20-25 mph. $100 from Tower's Scratch & Dent was a really good deal for it IMO.

Hopefully Yeti Jr. won't eat parts like its big cousins do though.

Dropbear12 11-19-2016 10:18 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Would we expect it to be a bit bigger then 1/18 just like the 1/10?
And I wonder if a brushed set up like described would be enough to get it up and going.

StatGSR 11-20-2016 10:00 AM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Quote:

Originally Posted by Dropbear12 (Post 5592100)
Would we expect it to be a bit bigger then 1/18 just like the 1/10?
And I wonder if a brushed set up like described would be enough to get it up and going.

hard to say, but a 370 motors are more common in typical 1/18s. 380 motors are more common in 1/16 and 1/14 models like the tacon and traxxas models. if it is small like alike other 1/18s, a 380 should make it move really well.

kurtz49 11-20-2016 10:15 AM

Re: Axial 1/18 Yeti (and Yeti Score)
 
This is intriguing. I have long wanted a sub 1/10 scale crawler but they either seemed to toy like or cost wise they were too close to a 1/10 to justify it in my mind. If it's Axial quality and $160 that could be the sweet spot for me.

I did some math to see how big it might be. Looking at the wheelbase of the 1/8 and 1/10 Yeti and then extrapolate that out to 1/18 I came up with an 8.05556 inch wheelbase, so call it 8 inches. The Losi MRC has an 8.5 inch wheelbase and runs 1.9 wheels. I could see this on 1.9s too.

Hopefully some more info will be leaked soon!

Brake Weight 11-20-2016 10:17 AM

Re: Axial 1/18 Yeti (and Yeti Score)
 
I've got a cheap 2850 3500kV can with a 4mm shaft not doing anything and needs a home.

Dropbear12 11-20-2016 12:49 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
I'm speculating mid December announcement/release based on tower having a 1/18 tactic esc/rx and a 2 channel tx in their upcoming products section scheduled for mid December arrival.

TowerHobbies.com | Tactic RE20 2in1 SLT Receiver/20A ESC Axial 1/18

kurtz49 11-20-2016 02:59 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
That is sound logic but I am going to go big and say it's available for order on Tower by Wednesday of this week! Gotta be there for Black Friday!

Lavaheadache 11-20-2016 04:42 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Quote:

Originally Posted by Dropbear12 (Post 5592283)
I'm speculating mid December announcement/release based on tower having a 1/18 tactic esc/rx and a 2 channel tx in their upcoming products section scheduled for mid December arrival.

TowerHobbies.com | Tactic RE20 2in1 SLT Receiver/20A ESC Axial 1/18

If I were a gambling man I would say that this setup will definitely be in the mini. It kind of bums me out though as units like that are cost cutting to say the least. Hopefully they model itself is of good quality.

Dropbear12 11-20-2016 04:50 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Quote:

Originally Posted by kurtz49 (Post 5592338)
That is sound logic but I am going to go big and say it's available for order on Tower by Wednesday of this week! Gotta be there for Black Friday!

Inside scoop???? Haha if only, will definitely be getting one when they come out. And throwing a mamba micro x and 5300kV combo at it and see if it explodes.

TheLetterJ 11-21-2016 01:35 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
From RC Driver magazine that just showed up in the mail: ...it's powered by a 380 sized brushed motor... also featuring a bespoke all-in-one programmable Tactic ESC and receiver, paired with a 3 wire micro high torque steering servo. $159.99

Brake Weight 11-21-2016 01:44 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
I'm getting anxious now.

DenisLM 11-21-2016 02:43 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
more pictures?

badhoopty 11-21-2016 08:19 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Quote:

Originally Posted by SCREAMER (Post 5591048)
:roll:

lol

curvedwallride 11-22-2016 04:05 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
I know we don't know much about it, but is there any sort of aftermarket for 1/18 trucks like the Yeti?

Brake Weight 11-22-2016 04:25 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
None really...yet. There are plenty of 1/18 both hobby grade and Chinese hobby grade. If they use scaled down hardware like m2 and m2.5 bolts everyone would need new bolt bins. The 28mm brushless motors are available but mostly sensorless. Many kV options though. Id like to know wheel and tire size now, too. But I'd guess anything under 100mm would work well.

Wes S. 11-22-2016 05:10 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
If I was to buy one (which, who knows, I might), the first thing I'd do is get a real Tactic receiver (if it fits) and a Castle 1/18 BL combo. "thumbsup"

curvedwallride 11-22-2016 05:17 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Quote:

Originally Posted by Brake Weight (Post 5593247)
None really...yet. There are plenty of 1/18 both hobby grade and Chinese hobby grade. If they use scaled down hardware like m2 and m2.5 bolts everyone would need new bolt bins. The 28mm brushless motors are available but mostly sensorless. Many kV options though. Id like to know wheel and tire size now, too. But I'd guess anything under 100mm would work well.


so we're all going to buy it and break it within a few days and not be able to fix it. Sweet!

mikemcE 11-22-2016 05:55 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Quote:

Originally Posted by curvedwallride (Post 5593262)
so we're all going to buy it and break it within a few days and not be able to fix it. Sweet!



BUT ...... we can moan and complain right here !!!!!


Hang up and Drive

Brake Weight 11-22-2016 06:09 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Quote:

Originally Posted by curvedwallride (Post 5593262)
so we're all going to buy it and break it within a few days and not be able to fix it. Sweet!



Not until Axial releases parts. Or the aftermarket takes one and starts fanning up parts.

Lavaheadache 11-22-2016 06:33 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Hot racing and gpm will no doubt have a slew of parts in no time as they do any other axial vehicle

DenisLM 11-22-2016 06:48 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
The average width of the 1/18 scale is 7 in, the AR44 is 8.9 in
I'm not gonna be surprised if Axial get the AR44 with short lockouts as rear axle of the Yeti jr., (or even keep the wider width).
That will save a bunch time developing the parts and at the same time already with some aftermarket support.
And definitely 1.9 wheels.

Brake Weight 11-22-2016 08:37 PM

Axial 1/18 Yeti (and Yeti Score)
 
These are 96mm eye to eye. The Yeti and Bomber are 142mm and the TH is 116mm. That's nearly 30% shorter than the 1/10 Yeti. Just the color.....
http://m.banggood.com/Feiyue-Upgrade...p-1063941.html

TheLetterJ 11-22-2016 09:06 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Those are replacements for the 1/12 wltoys 12428 and or the feiyue twin hammers-esque knock off, nothing secret there.

Brake Weight 11-22-2016 10:29 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Quote:

Originally Posted by TheLetterJ (Post 5593394)
Those are replacements for the 1/12 wltoys 12428 and or the feiyue twin hammers-esque knock off, nothing secret there.



Correct.

rustneversleeps 11-22-2016 10:40 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
they'll be all kinds of after market parts or parts from your own parts bin..
People will have this chop up in no time....even if it is chinese goodies.."thumbsup"

Dropbear12 11-23-2016 12:07 AM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Double thumbs up for the AR44 love the look of that set-up. "thumbsup"

Brutus279 11-23-2016 08:55 AM

Re: Axial 1/18 Yeti (and Yeti Score)
 
More than a week since the inadvertent leak and still nothing form Axial or RCDriver magazine... The long wait slowly erode the interest. I'm starting to worry that they might just miss the boat.

mikemcE 11-23-2016 09:30 AM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Waaaaa Waaaaa a whole week ???
Called ad lead time, hold your panties until it is actually released.


Hang up and Drive

TheLetterJ 11-23-2016 01:10 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
I had already decided that I would ask Mrs. Clause for a Proline Ambush, but I'm going to hold out a bit longer to see if I want a Yeti Jr instead. We've got a bunch of 1/18's already, but one more wouldn't hurt.... if it can actually drive on dirt. I've never been one to get so caught up in the suspense of upcoming models (my motorcycle buddies are already getting antsy looking towards 2018 models!) But I've got a lot of time on my hands lately, so I'll play along.

OSRC 11-23-2016 01:49 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Quote:

Originally Posted by mikemcE (Post 5593584)
Waaaaa Waaaaa a whole week ???
Called ad lead time, hold your panties until it is actually released.

If it's on the "Xmas list" it's got to be released soon. Time's a ticking.

Most likely, it's probably another "let's accidentally list it it" or stage a fake drone flyover or some other hairbrained marketing idea. Just issue a press release with some facts/pics, price, and estimated release date. Boom, done. Enough with the games already! These teasers get old.

That's the point of my post anyway, missed by some. Panties are firmly ensconced.

mikemcE 11-23-2016 02:28 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Photoshop is a neat thing, I've done all sorts of .......


Hang up and Drive

curvedwallride 11-23-2016 02:33 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Quote:

Originally Posted by OSRC (Post 5593716)
If it's on the "Xmas list" it's got to be released soon. Time's a ticking.

Most likely, it's probably another "let's accidentally list it it" or stage a fake drone flyover or some other hairbrained marketing idea. Just issue a press release with some facts/pics, price, and estimated release date. Boom, done. Enough with the games already! These teasers get old.

That's the point of my post anyway, missed by some. Panties are firmly ensconced.

They did it so people on forums would get stoked for it, causing hype. See what we are doing people? We fell for it! :shock:

Brake Weight 11-23-2016 02:41 PM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Quote:

Originally Posted by curvedwallride (Post 5593745)
They did it so people on forums would get stoked for it, causing hype. See what we are doing people? We fell for it! :shock:



I'm standing by waiting for one of y'all to post a link that's it's for sale. Then I'll buy one. No need to scour the internetz any more than I have to.

rustneversleeps 11-24-2016 12:10 AM

Re: Axial 1/18 Yeti (and Yeti Score)
 
this must mean something..

TowerHobbies.com | Tactic RE20 2in1 SLT Receiver/20A ESC Axial 1/18

cmbscx10 11-24-2016 12:35 AM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Since i didn't like my Yeti overall i missed this announcement. When a 1/18 Bomber comes out i'll bite.

txbart 11-24-2016 12:57 AM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Quote:

Originally Posted by rustneversleeps (Post 5593990)

It's a shame that's only a 2 channel though. Hopefully it will be tiny & fit in those Orlandoos.

rustneversleeps 11-24-2016 09:51 AM

Re: Axial 1/18 Yeti (and Yeti Score)
 
But then again doesn't Tactic make product for other Rc companies maybe it doesn't pertain to the 1/18 bomber at all...Oops..."thumbsup"

ninja turtle 11-24-2016 09:56 AM

Re: Axial 1/18 Yeti (and Yeti Score)
 
Quote:

Originally Posted by rustneversleeps (Post 5593990)

I know you don't read threads before you post but that's mentioned in post #51

rustneversleeps 11-24-2016 10:08 AM

Re: Axial 1/18 Yeti (and Yeti Score)
 
read all the time that why i corrected myself and if you read tactic does supplies for other company.....so it could be for another product..


All times are GMT -6. The time now is 09:12 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com