RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial Yeti (http://www.rccrawler.com/forum/axial-yeti/)
-   -   Johnny built a purple Yeti (http://www.rccrawler.com/forum/axial-yeti/582733-johnny-built-purple-yeti.html)

JohnnyAnguish 04-03-2017 01:02 PM

Johnny built a purple Yeti
 
I was about to do some upgrades to my Yeti when I thought: "Hey! My 1.9 rigs have build threads, but I don't show my 2.2s any love." Feeling sufficiently jerkish, I decided to create a thread for my purple Yeti. This is that thread, or will be once I click the "Submit New Thread" button, anyway.

There's not a whole lot to mention just yet. It's a pretty standard build from when the kit version first came out. It's purple (I may have mentioned that). There are a few stripes on it. The front diff is open (500K diff fluid). It's got a Castle MMP ESC and Tekin Pro4HD 3000kv motor for guts. Castle BEC. Spektrum receiver. CI bumper insert. HeyOK KOH rear lights. Some more lights up front. I shoved CI Deuces Wild foams into the kit tires and mounted them on Vanquish Method 105s with Carter Fab wheel wideners. I think that's about it.

The truck has held up pretty well. It's seen 2s and 3s action on the trails and just bashing around. Mostly 3s now. It doesn't get as much action as my other rigs, but I've been having more and more fun with it lately. Hence, I've decided to make a few upgrades. Even more upgrades will happen as I inevitably break things from the sense of invincibility these new parts will most certainly inspire in me. Oh, and I want to try to stop the dang wheel nuts from backing off all the time.

Shut up already. Here are a few pictures as it sits now.

https://c1.staticflickr.com/1/258/20...8e9a4c9b_b.jpg
Axial Yeti by johnny anguish, on Flickr

https://c1.staticflickr.com/1/314/31...81fe2143_b.jpg
Axial Yeti by johnny anguish, on Flickr

https://c1.staticflickr.com/8/7693/2...f655b76e_b.jpg
Axial Yeti by johnny anguish, on Flickr

https://c1.staticflickr.com/8/7651/2...9dcbd6bd_b.jpg
Axial Yeti by johnny anguish, on Flickr

https://c1.staticflickr.com/1/334/19...b7f63323_b.jpg
Axial Yeti by johnny anguish, on Flickr

magic_yeti 04-03-2017 01:14 PM

Re: Johnny built a purple Yeti
 
Regarding your wheel nut prob. I solved Mine with a4 serrated nylock nuts. 25pieces just 7eur.
http://www.screwsandmore.de/de/25-St...erzahnung.html
Never got loose since i use These.

Gesendet von meinem Nexus 5 mit Tapatalk

JohnnyAnguish 04-03-2017 01:17 PM

Re: Johnny built a purple Yeti
 
Quote:

Originally Posted by magic_yeti (Post 5691416)
Regarding your wheel nut prob. I solved Mine with a4 serrated nylock nuts. 25pieces just 7eur.
25 Stück DIN 6926 A4 M4 Sperrverzahnung - SAM Screws and more GmbH
Never got loose since i use These.

Gesendet von meinem Nexus 5 mit Tapatalk

Thanks for the tip. I've got another option I'm going to try. Initial testing looks promising.

JohnnyAnguish 04-03-2017 01:19 PM

Re: Johnny built a purple Yeti
 
Oh man, I forgot to mention that the purple Yeti has also been running the SSD wide axle kit since day one. I knew I was forgetting something!

DavidH 04-03-2017 01:34 PM

Re: Johnny built a purple Yeti
 
Quote:

Originally Posted by JohnnyAnguish (Post 5691409)
...

Oh, and I want to try to stop the dang wheel nuts from backing off all the time.

I use double nuts, at least on the rear wheels. The second nylock nut should not have the flange.

https://scontent-sea1-1.xx.fbcdn.net...4b&oe=59645C1C

JohnnyAnguish 04-03-2017 05:57 PM

Re: Johnny built a purple Yeti
 
Quote:

Originally Posted by DavidH (Post 5691425)
I use double nuts, at least on the rear wheels. The second nylock nut should not have the flange.

https://scontent-sea1-1.xx.fbcdn.net...4b&oe=59645C1C

That's the solution I'm trying out. I'm doing a regular nut with a flanged nylock nut on top.

DavidH 04-03-2017 06:10 PM

Re: Johnny built a purple Yeti
 
Quote:

Originally Posted by JohnnyAnguish (Post 5691537)
That's the solution I'm trying out. I'm doing a regular nut with a flanged nylock nut on top.

The flange should be against the plastic (assuming plastic wheels) for strength; the flangeless nut is the locknut. They can both be Nylock.

JohnnyAnguish 04-03-2017 06:15 PM

Re: Johnny built a purple Yeti
 
Quote:

Originally Posted by DavidH (Post 5691546)
The flange should be against the plastic (assuming plastic wheels) for strength; the flangeless nut is the locknut. They can both be Nylock.

Metal wheels in this case. I couldn't find a nylock nut thin enough to double up on the rear axles.

DavidH 04-03-2017 06:22 PM

Re: Johnny built a purple Yeti
 
Quote:

Originally Posted by JohnnyAnguish (Post 5691548)
Metal wheels in this case. I couldn't find a nylock nut thin enough to double up on the rear axles.

Got it - as long as it holds. "thumbsup"

JohnnyAnguish 04-03-2017 08:33 PM

Re: Johnny built a purple Yeti
 
Quote:

Originally Posted by DavidH (Post 5691550)
Got it - as long as it holds. "thumbsup"

We'll find out!

JohnnyAnguish 04-04-2017 02:18 PM

Re: Johnny built a purple Yeti
 
Some partz!

https://c1.staticflickr.com/3/2917/3...91406d93_b.jpg
Axial Yeti Build by johnny anguish, on Flickr

JohnnyAnguish 04-05-2017 01:31 PM

Re: Johnny built a purple Yeti
 
Partz go on...

U4 aluminum Beef Tubes to keep the lockouts from coming loose and adding some strength...

https://c1.staticflickr.com/4/3940/3...4c507bcc_b.jpg
Axial Yeti Build by johnny anguish, on Flickr

Incision locker for lockering...

https://c1.staticflickr.com/3/2901/3...73718011_b.jpg
Axial Yeti Build by johnny anguish, on Flickr

One time on a trail run my rear driveshaft came apart at some point and I limped back to the car with FWD. As soon as I got home I placed an order for this MIP driveshaft. The next day I retraced my steps with my SCX-10 G6 Wrangler and found the missing parts (minus a screw) and got my Yeti back up and running. It held up so well I never bothered to put on the MIP shaft. Well, it's on there now. I had the whole back end apart anyway...

https://c1.staticflickr.com/3/2913/3...2bfcfbb6_b.jpg
Axial Yeti Build by johnny anguish, on Flickr

JohnnyAnguish 04-07-2017 10:44 AM

Re: Johnny built a purple Yeti
 
All buttoned up...

https://c1.staticflickr.com/3/2857/3...6a3a7b7c_b.jpg
Axial Yeti Build by johnny anguish, on Flickr

https://c1.staticflickr.com/4/3695/3...6ca23392_b.jpg
Axial Yeti Build by johnny anguish, on Flickr

https://c1.staticflickr.com/4/3955/3...bd1eb9e3_b.jpg
Axial Yeti Build by johnny anguish, on Flickr

https://c1.staticflickr.com/4/3780/3...bf19bcb9_b.jpg
Axial Yeti Build by johnny anguish, on Flickr

https://c1.staticflickr.com/4/3682/3...fcfa0111_b.jpg
Axial Yeti Build by johnny anguish, on Flickr

JohnnyAnguish 05-31-2017 10:33 AM

Re: Johnny built a purple Yeti
 
I took the Purple Yeti out for a rough 'n' tumble outing a couple of weeks ago. I managed to mangle a couple of hinge pins when I started launching the rig every which way at the pump track, but it still drove home under its own power. 'Twas fun.

https://c1.staticflickr.com/5/4157/3...a13daefa_b.jpg
Axial Yeti by johnny anguish, on Flickr

https://c1.staticflickr.com/5/4194/3...a345ca40_b.jpg
Axial Yeti by johnny anguish, on Flickr

https://c1.staticflickr.com/5/4162/3...3db2f794_b.jpg
Axial Yeti by johnny anguish, on Flickr

Shinchu 06-04-2017 11:21 PM

Re: Johnny built a purple Yeti
 
Lol @ your driveshaft story
I had a similar issue. Twice?
First time i was hauling it accross a park with short grass, rear sus over traveled, popped the shaft halves apart. No biggie.
Second time i was in the snow, grub screw that hold the front output shaft from the trans was like
Seeyalaterbye!!!
Never found it and i had to buy some rediculous axial part at my local shop to get it running in time for my father in laws where we both run yeti in his amazing backyard. Not missing out on that so... new screw was coated in gorilla glue lol

Been fine ever since!

Sick color combos, btw. And im jealous of your heyok koh lights. Sold out everywhere!

heyok 06-05-2017 09:48 AM

Re: Johnny built a purple Yeti
 
Quote:

Originally Posted by Shinchu (Post 5715271)
...
Sick color combos, btw. And im jealous of your heyok koh lights. Sold out everywhere!

I know where you can get some of those ;-)
Send me a PM!

JohnnyAnguish 06-05-2017 01:54 PM

Re: Johnny built a purple Yeti
 
Quote:

Originally Posted by heyok (Post 5715396)
I know where you can get some of those ;-)
Send me a PM!

He'll even build you a high voltage version! Al made me one that works up to 10v for the Bomber I'm building.

Shinchu 06-06-2017 08:35 AM

Re: Johnny built a purple Yeti
 
well this was an unexpected surprise!

JohnnyAnguish 01-29-2018 09:34 AM

Re: Johnny built a purple Yeti
 
A little while back I picked up the Vanquish front skid in an effort to give those front hinge pins a fighting chance. I've been trailing this rig a bit lately, but nothing that would really stress the front end. Fingers crossed...

I probably should have taken this picture before I got it all scratched up. It looked really nice for a few minutes, anyway.

https://farm5.staticflickr.com/4766/...f6d722a5_b.jpg
Axial Yeti Build by johnny anguish, on Flickr

JohnnyAnguish 01-30-2018 04:39 PM

Re: Johnny built a purple Yeti
 
And here's the purple thingie prowling the trails again...

https://farm5.staticflickr.com/4615/...cb4e3eb3_b.jpg
Axial Yeti by johnny anguish, on Flickr

https://farm5.staticflickr.com/4652/...5206825c_b.jpg
Axial Yeti by johnny anguish, on Flickr

https://farm5.staticflickr.com/4717/...08eccb9a_b.jpg
Axial Yeti by johnny anguish, on Flickr


All times are GMT -6. The time now is 02:03 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com