Front suspension range Hey all. New here. I have been building and destroying my yeti for the whole summer. First rc build and I am having a blast. I have recently decided to upgrade the front almost completely. Since my rebuild, I can't seem to get any range from it. When the shock are installed, I cannot get it to bottom to the ground as before. They get fully compressed. The shock are powerstroke rear slash. When i disconnect the shock it bottoms. In the other direction.it maxes when the chubs interferes with the a arm. I am doing something wrong? In can I increase the range with the shocks installed? Thanks for the help. https://uploads.tapatalk-cdn.com/201...3470b21328.jpghttps://uploads.tapatalk-cdn.com/201...27f1f71349.jpghttps://uploads.tapatalk-cdn.com/201...d267a1484e.jpg Sent from my LG-H873 using Tapatalk |
Re: Front suspension range Your shox are to long for the yeti front, they are 102mm, the yeti uses org. 90mm shox front. |
Re: Front suspension range Thanks for the answer. I kind a figured that.... Can you tell me how come proline sells them for yeti? On the website, there 6063-01, it says it fits a yeti front.... I am kinda bummed as they were expensive... Thnaks again. |
Re: Front suspension range I still use my og icons, so i have no expierence with power stroke front shox. I just compared the length. I tried the power stroke rear shox, they fit but i never get them to work on my little monster. so they are in the shelf now and the icons back on my little monster. |
Re: Front suspension range Vanquish also makes this. Yeti Front Shock Adjuster Clear Anodized - Vanquish Products It might help. |
Re: Front suspension range I use the Slash rear Power Strokes on the front of my Yeti. I made some short extensions for the upper shock mounts out of some left over Losi parts I had. http://i137.photobucket.com/albums/q...psdshehcy3.jpg http://i137.photobucket.com/albums/q...psczhiyp7z.jpg |
Re: Front suspension range Pretty cool mod. I have a original tower left... I could figure something out... Since yesterday, I removed my upgraded boom racing a-arms and returned to the originals. I have noticed that the interference with the C-Hubs is a lot smaller and increased the range a lot! Thanks for the help everybody. |
Re: Front suspension range you may find this useful? Boom Racing Aluminium Front Shock Tower Extension https://www.asiatees.com/display?Axi...d=136772&pid=1 |
Re: Front suspension range That Boomracing doesn't really "extend" the shock tower in a way that would help with longer shocks. If you look closer it has been advertised as a means to avoid bottoming out. They sell the Proline Slash rear powerstrokes for Yeti because quite a many Yeti drivers don't want their Yeti to Bottom out....I don't like that kind of a setup, always want my rigs to be able to bottom out. To this day I haven't seen any ready made solution, but I've also put an extra piece on the shock tower to extend it to make it able to bottom out...and thats on a score with smaller diameter tires. So either extend your tower, or switch to slash front powerstrokes. |
All times are GMT -6. The time now is 08:01 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com