|
| LinkBack | Thread Tools | Display Modes |
10-20-2018, 02:07 PM | #1 |
Newbie Join Date: Sep 2017 Location: California
Posts: 37
| Mamba x mounting question
I’m trying to install a new mamba x esc on my 1/10 yeti. What is everybody using to mount the esc. I bought the rpm esc cage and it doesn’t fit. Wondering if there’s another cage I don’t know about. I could just use double sided tape and a zip tie.
|
Sponsored Links | |
10-20-2018, 02:54 PM | #2 |
Pebble Pounder Join Date: Nov 2016 Location: Southern California
Posts: 183
| Re: Mamba x mounting question I used servo tape on my MMX. Sent from my iPhone using Tapatalk |
10-20-2018, 03:12 PM | #3 |
Newbie Join Date: Sep 2017 Location: California
Posts: 37
| Re: Mamba x mounting question
I will just do that
|
10-20-2018, 07:27 PM | #4 |
Newbie Join Date: Oct 2018 Location: ludington mi
Posts: 3
| Re: Mamba x mounting question
Yup.i used velcro to absorbe some of the shock the MM2 im using in my 2wd slash that only sees road use ,I have the suspension almost bottomed out to keep the chassis low .I think it helps the electronics somewhat safer .im not sure this helps , but anyhow thats how i have mine . Sent from my SM-G965U using Tapatalk |
10-20-2018, 08:23 PM | #5 |
Pebble Pounder Join Date: Jan 2017 Location: Maine
Posts: 196
| Re: Mamba x mounting question
Servo tape
|
10-21-2018, 01:14 AM | #6 |
Rock Crawler Join Date: Mar 2012 Location: UK
Posts: 705
| Re: Mamba x mounting question |
10-21-2018, 01:44 AM | #7 |
RCC Addict Join Date: Jun 2016 Location: Germany
Posts: 1,364
| Re: Mamba x mounting question
Just double tape, best is an outdoor tape like tesa powerbond outdoor https://www.tesa.com/en/consumer/tes...d-outdoor.html (don't know if you get it in the states but sure similar are available) and a zip tie to secure just in case. But normally not necessary, if i dismount my esc i have to be very gently to not destroy the esc case, just take care to remove the sticker on the bottom of the esc. the rpm cage is nice too but needs a little modification.
|
10-21-2018, 10:11 PM | #8 |
Newbie Join Date: Sep 2017 Location: California
Posts: 37
| Re: Mamba x mounting question |
10-22-2018, 11:28 AM | #9 |
Rock Crawler Join Date: Mar 2012 Location: UK
Posts: 705
| Re: Mamba x mounting question |
12-23-2018, 11:40 AM | #10 |
Pebble Pounder Join Date: Mar 2012 Location: Fort Collins
Posts: 173
| Re: Mamba x mounting question
I use RC Helicopter double sided GYRO gel tape, it comes in several thicknesses and it does an amazing job of vibration dampening, I also use it on any RX with AVC or TSM (they have gyro's in them). I hope this helps, Ed
|
12-23-2018, 07:13 PM | #11 |
Pebble Pounder Join Date: Feb 2017 Location: Louisburg, NC
Posts: 115
| Re: Mamba x mounting question
I used the super strong Velcro on my YetiXL - it's held up so far. It's also tethered with a zip tie in case it comes loose. I can lift the entire truck by the ESC without the Velcro separating. https://www.homedepot.com/p/Scotch-1...6731/204465390 |
Tags |
mamba x, yeti |
Mamba x mounting question - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mamba X Mounting | zackerin7 | Axial Yeti | 4 | 05-05-2017 03:19 PM |
Mounting Mamba Max Pro ESC in Rear | GrimJeeper91 | Axial Wraith | 14 | 02-22-2015 06:16 PM |
Servo mounting question | natskiboy | Axial SCX-10 | 5 | 04-09-2012 12:29 PM |
Mamba Max mounting.... | TattooKenny | Team Losi Comp Crawler | 15 | 05-31-2009 11:16 AM |
Servo mounting question | HiloDB1 | Axial AX-10 Scorpion | 1 | 06-18-2008 03:16 AM |
Thread Tools | |
Display Modes | |
| |