Longest motor can w/o cutting into battery tray?
 

Does anyone know the longest can that will fit without cutting? I've got a new kit on the way and trying to decide on which motor to buy. Thanks for any help.

Re: Longest motor can w/o cutting into battery tray?
 

I have a Holmes Hobbies Puller pro BL540XL in my yeti and it goes all the way up to the stock tray. (But not into it). According to Holmes website that motor is 63mm in length...Here is a pic... Excuse the snow as this is my most recent pic and after a romp in the snow... [emoji1787]https://uploads.tapatalk-cdn.com/201...45142431ca.jpg

Sent from my Pixel 2 using Tapatalk

Re: Longest motor can w/o cutting into battery tray?
 

Thanks. That helps a lot.

Re: Longest motor can w/o cutting into battery tray?
 

Pro HD and Roc412 HD fit just right.

Sent from my SM-G935P using Tapatalk

Re: Longest motor can w/o cutting into battery tray?
 

A Castle Creations 1512 2650kv will just fit in there, but will need at least a 3S LiPo to wake things up.

Re: Longest motor can w/o cutting into battery tray?
 

I run the castle 1512 no fitment issues. The 1515 I needed to notch the battery tray. 2nd the minimum 3s!

Re: Longest motor can w/o cutting into battery tray?
 

I am running a TenShock SC411 in my Yeti. No modifications needed, it's a tight fit. Sensor wire fits right in there too. Buttery smooth operation and a boat load of power. I run it with a Castle MMP. The motor gets lukewarm running it on 3s with pretty aggressive gearing. Love it.

-Corrupt

Re: Longest motor can w/o cutting into battery tray?
 

Most 550 SCT-sized cans will just make it. I'm running a Hobbystar Pro4 can in mine. The sensor wire touches the battery tray, and it's a tight squeeze, but it fits.