|
| LinkBack | Thread Tools | Display Modes |
01-06-2021, 07:31 PM | #1 |
Newbie Join Date: Sep 2017 Location: California
Posts: 45
| Upgrades for my yeti 1/10?
What are the upgrades everyone does to make it run smoother, I have the mamba x, castle 3800 kv and a savox saw-1210 digital servo , 5000 3cell, proline shocks, castle motor cooler and it’s a yeti kit. Thanks for reading
|
Sponsored Links | |
01-08-2021, 06:27 AM | #2 |
RCC Addict Join Date: Jun 2016 Location: Germany
Posts: 1,364
| Re: Upgrades for my yeti 1/10?
What you mean smoother? If you think about low speed/startup. Do you have the sensored or non sensored version of the motor. If non sensored, a sensored version would help. I run the HH Puller Pro R 540-L combined with the monsterX in my Yeti and it's very smooth at startup/low speed. If sensored maybe a smaller pinion can help smoothen it up. or play with some esc settings to get it to your liking. |
01-16-2021, 09:12 PM | #3 |
Newbie Join Date: Dec 2020 Location: Clarkston
Posts: 3
| Re: Upgrades for my yeti 1/10?
Definitely depends on what you mean by smoother. If it's ride characteristics then play around with different shock oils. Heavier in the rear helps a lot for the stock rear bounce and maybe stiffer springs in the front if you are bottoming out. Electronics wise I am also running a Holmes Puller Pro but the XL 3500KV version and a Holmes Trailmaster Ble Pro ESC. There are a few other little things you can do as well depending on your definition.
|
Tags |
upgrades helps |
Upgrades for my yeti 1/10? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Yeti upgrades | emerstride | Axial Yeti | 2 | 07-29-2015 10:12 AM |
| |