RCCrawler Forums

Erik D_lux · 04-18-2011, 06:23 PM

EVERYTHING is in stock

BC Racing · 04-20-2011, 10:06 PM

Thank you Erik.....appreciate you fixing that shipping addy and still getting it here lighting fast

Very nice product by the way.....I have the full set + the .300's and still have room left over, mounted in some Bad Attitude Machining rims with 850's.

Erik D_lux · 04-20-2011, 11:08 PM

Good deal.

I have been looking at those wheels. They look really nice. Looks like they figured out how to make tons of room on the backside too.

BC Racing · 04-21-2011, 01:36 PM

Quote:

Originally Posted by Erik D_lux

I have been looking at those wheels. They look really nice...

You should give em a go, Paul does some dam nice work...working on my third set now, doubt I will run anyone else's!

toy4crawlin · 04-29-2011, 01:58 PM

I would like to buy but could you provide a link or at least the correct name of where to get the knuckles for a 1st gen. berg. I have searched TCS and CKRC and cannot get enough info of which knuckles to get.
I have high back spaced HPI mesh 2.2 wheels, so it looks like most of the knuckles will not fit.
Thank you

Erik D_lux · 04-29-2011, 02:03 PM

Here you go:

Axial hi clearance
http://www.rpphobby.com/product_p/ax30526.htm

Vanquish zero ackerman
http://www.rpphobby.com/product_p/ax30526.htm

Vanquish Berg
http://www.rpphobby.com/product_p/vps01174.htm

Vanquish AX10
http://www.rpphobby.com/product_p/vps01171.htm

RC bros
http://cart.rcbros.com/product_info.php?products_id=497

toy4crawlin · 05-02-2011, 07:22 PM

Quote:

Originally Posted by Erik D_lux

Here you go:

Axial hi clearance
http://www.rpphobby.com/product_p/ax30526.htm

Vanquish zero ackerman
http://www.rpphobby.com/product_p/ax30526.htm

Vanquish Berg
http://www.rpphobby.com/product_p/vps01174.htm

Vanquish AX10
http://www.rpphobby.com/product_p/vps01171.htm

RC bros
http://cart.rcbros.com/product_info.php?products_id=497

THANK YOU.
Once I know what wheels to get , I will pick up a pair.
I dont know how those are found, I have done searches and looked in crawler/axles tab, still cant figure out how I would find the berg knuckles on their store..??.

toy4crawlin · 05-02-2011, 08:48 PM

Quote:

Originally Posted by Erik

[IMG

http://i180.photobucket.com/albums/x263/erikd_lux/Selling/Berg2.jpg[/IMG]

That's nice machine work.
Are you working on a all in one knuckle weight, so the knuckle becomes part of the new piece you have made?

Erik D_lux · 05-02-2011, 09:20 PM

Quote:

Originally Posted by toy4crawlin

That's nice machine work.
Are you working on a all in one knuckle weight, so the knuckle becomes part of the new piece you have made?

No. Its pretty nice to have everything separate. That way you have more options and its easier to work on your car.

Evandiego · 05-03-2011, 09:26 AM

Hey guys! Got my weights in the mail on Friday and took me 5 mins to install. Great craftsmanship. Good customer service and communication from Dlux and only took 2 weeks to get to Canada from USA.

These were installed on VP high clearance knuckles with Berg offset DNA Thrasher wheels. The largest optional ring that works for these wheels is the .300" thick ones. I don't want to add more weight any ways.

I still have to test these out but have to wait for parts in the mail.

Thanks Dlux!

Tight fit but works for the Thrasher wheels!

Finished

Erik D_lux · 05-03-2011, 10:38 AM

Good to hear.

Its always a huge relief when an international package arrives.

AUSCRAWL · 05-05-2011, 02:08 AM

mine landed on my door step today. easy as to mount and works a treat. Fantastic product. Full set plus .300 and still plenty of room for more in SLW v2 respun wheels. Cheers again.

kblackwell71 · 05-07-2011, 12:16 PM

Got mine yesterday, super faast shipping, can't wait to get them installed

thanks

Difuser · 05-26-2011, 09:01 PM

Erik, thanks again fr the weights. They worked perfect on the front of my JK.
I also let Norm(team3six) borrow them for the teenycar build in TTC on Sunday and they were the ticket for his build.

Erik D_lux · 05-26-2011, 11:45 PM

Quote:

Originally Posted by Difuser

Erik, thanks again fr the weights. They worked perfect on the front of my JK.
I also let Norm(team3six) borrow them for the teenycar build in TTC on Sunday and they were the ticket for his build.

Sounds great. I dont think I have seen a single picture of the weights being used on anything other than a comp crawler.

Difuser · 05-27-2011, 05:06 PM

I have the JK torn apart right now. I'll look and see if some of the shots of Teeny have the weights in them

Muddy but there...

team3six · 05-29-2011, 11:01 PM

Quote:

Originally Posted by Erik D_lux

Sounds great. I dont think I have seen a single picture of the weights being used on anything other than a comp crawler.

Yeah I am buying a set of these as soon as possible. OMG what a difference and well worth it. Dan hooking me up sure saved that truck by far.

Thanks Dan and Thank you Erik for making these.

Erik D_lux · 05-30-2011, 05:50 PM

Nice. Car looks good too. I bet they help a ton with some of those situations.

team3six · 06-06-2011, 10:06 PM

P.M. sent boss. hook me up

Bad Attitude · 06-07-2011, 06:19 AM

Awesome produce Erik, thanks again for all your help!
Anyone that is on the fence on these weights... do it!

Name: uploadfromtaptalk1307449124783.jpg
Views: 407
Size: 45.4 KB

Name: uploadfromtaptalk1307449124783.jpg
Views: 407
Size: 45.4 KB

Name: uploadfromtaptalk1307449139216.jpg
Views: 412
Size: 28.4 KB

04-20-2011, 10:06 PM	#82
BC Racing Rock Crawler Join Date: Jun 2010 Location: KCRC Posts: 774	Thank you Erik.....appreciate you fixing that shipping addy and still getting it here lighting fast Very nice product by the way.....I have the full set + the .300's and still have room left over, mounted in some Bad Attitude Machining rims with 850's. Attached Images

05-03-2011, 09:26 AM	#90
Evandiego Pebble Pounder Join Date: Jun 2009 Location: Canada Posts: 196	Got my knuckles! DNA Thrasher wheels and VP knuckles Hey guys! Got my weights in the mail on Friday and took me 5 mins to install. Great craftsmanship. Good customer service and communication from Dlux and only took 2 weeks to get to Canada from USA. These were installed on VP high clearance knuckles with Berg offset DNA Thrasher wheels. The largest optional ring that works for these wheels is the .300" thick ones. I don't want to add more weight any ways. I still have to test these out but have to wait for parts in the mail. Thanks Dlux! Tight fit but works for the Thrasher wheels! Finished

05-27-2011, 05:06 PM	#96
Difuser RCC Addict Join Date: Oct 2007 Location: Auburn Posts: 1,007	I have the JK torn apart right now. I'll look and see if some of the shots of Teeny have the weights in them Muddy but there... Last edited by Difuser; 05-27-2011 at 05:19 PM.

04-18-2011, 06:23 PM	#81
Erik D_lux Wanna get? Gotta want. Join Date: Apr 2010 Location: SLC, UT Posts: 7,052	EVERYTHING is in stock

04-20-2011, 11:08 PM	#83
Erik D_lux Wanna get? Gotta want. Join Date: Apr 2010 Location: SLC, UT Posts: 7,052	Good deal. I have been looking at those wheels. They look really nice. Looks like they figured out how to make tons of room on the backside too.

04-29-2011, 01:58 PM	#85
toy4crawlin I wanna be Dave Join Date: Feb 2006 Location: Campbell, CA 4 hrs 2Rubicon ! Posts: 2,044	I would like to buy but could you provide a link or at least the correct name of where to get the knuckles for a 1st gen. berg. I have searched TCS and CKRC and cannot get enough info of which knuckles to get. I have high back spaced HPI mesh 2.2 wheels, so it looks like most of the knuckles will not fit. Thank you

04-29-2011, 02:03 PM	#86
Erik D_lux Wanna get? Gotta want. Join Date: Apr 2010 Location: SLC, UT Posts: 7,052	Here you go: Axial hi clearance http://www.rpphobby.com/product_p/ax30526.htm Vanquish zero ackerman http://www.rpphobby.com/product_p/ax30526.htm Vanquish Berg http://www.rpphobby.com/product_p/vps01174.htm Vanquish AX10 http://www.rpphobby.com/product_p/vps01171.htm RC bros http://cart.rcbros.com/product_info.php?products_id=497

05-03-2011, 10:38 AM	#91
Erik D_lux Wanna get? Gotta want. Join Date: Apr 2010 Location: SLC, UT Posts: 7,052	Good to hear. Its always a huge relief when an international package arrives.

05-05-2011, 02:08 AM	#92
AUSCRAWL Newbie Join Date: Jan 2011 Location: Australia Posts: 41	mine landed on my door step today. easy as to mount and works a treat. Fantastic product. Full set plus .300 and still plenty of room for more in SLW v2 respun wheels. Cheers again.

05-07-2011, 12:16 PM	#93
kblackwell71 Pebble Pounder Join Date: Mar 2008 Location: Rock Springs Posts: 144	Got mine yesterday, super faast shipping, can't wait to get them installed thanks

05-26-2011, 09:01 PM	#94
Difuser RCC Addict Join Date: Oct 2007 Location: Auburn Posts: 1,007	Erik, thanks again fr the weights. They worked perfect on the front of my JK. I also let Norm(team3six) borrow them for the teenycar build in TTC on Sunday and they were the ticket for his build.

05-30-2011, 05:50 PM	#98
Erik D_lux Wanna get? Gotta want. Join Date: Apr 2010 Location: SLC, UT Posts: 7,052	Nice. Car looks good too. I bet they help a ton with some of those situations.

06-06-2011, 10:06 PM	#99
team3six www.team3sixrc.com Join Date: Mar 2008 Location: Scalerville Posts: 4,506	P.M. sent boss. hook me up

Sponsored Links

06-07-2011, 06:19 AM	#100
Bad Attitude Quarry Creeper Join Date: Apr 2009 Location: KC Posts: 216	Awesome produce Erik, thanks again for all your help! Anyone that is on the fence on these weights... do it!

RCCrawler Forums

Thread: Berg/Axial Knuckle weights