RCCrawler Forums

DUIdirk · 07-24-2006, 03:29 PM

I cant really tell if this is 32 pitch or 48, and cant find any info on it. Can anyone tell by looking?

http://www.ikarus-modellbau.de/onlin...=265&anid=4330

JohnRobHolmes · 07-24-2006, 03:50 PM

It is either 48p or mod .5

1BadJeepBruiser · 07-24-2006, 03:53 PM

I just heard back from RRP!!!! check this out!!!!

Quote:

Hi Mike ~

Yes, I do remember Doc Wildman, that was a while back!
We made them for him 100 pcs at a time, you would have to order that many for us to be able to make them again. Also, the size creates a problem with the grub screw, the wall of the pinion gear is thin, so if you overtighten the grub screw you can break the pinion. So, we cannot issie any warranty on that pinion.
I was able to find 44 pcs that we still had in stock, so if you would like to purchase them, let me know. They are $4.00 ea. + shipping.

I will be out of the office for a few days, I will answer your reply when I get back in.

Take care,
Cynthia/RRP

So what do you guys think? should I buy a vendors star? would you guys be interested in these??? obviously they are not cheap :(, so the price here would probably have to be about 8$ to make it worth it all...either way I am probably going to buy the last 44 they have.

MIke

JohnRobHolmes · 07-24-2006, 04:21 PM

It wouldnt be worth your time in my opinion. You will pay almost as much for a star as the profit you make. It would be nice to get somebody on the board to carry them though.

cartronicshn · 07-24-2006, 05:11 PM

i can take 10 for the $4 plus shipping

1BadJeepBruiser · 07-24-2006, 06:36 PM

Well guys I am going to be a vendor for these, I am going to place an order with them tommorow for the current ones in stock, and then I will go from there

MIke

rubicon20032003 · 07-24-2006, 07:50 PM

Mike

If you get them before mj .Can you bring me three of them for me?

WRXronald · 07-24-2006, 08:43 PM

edit... sorry.

WRXronald · 07-24-2006, 09:03 PM

10t 48p (or .5 modules i think) 3.2mm or '1/8' shaft....

i use these on my lehner motor on my trex helicopter... also used on Ikarus ECO8 heli...

see this site:

http://www.hobby-lobby.com/ecoparts.htm

"IK67108 PINION 10T 3.2mm $ 4.90
IN STOCK"

not to rain on the 44 of them pararde from RRP... RRP may very well make a better quality one, i don't know?

the first one i used seemed to wear out more quickly on the heli. and began to wear the plastic main gear mesh a bit as well too, but i think the 1st 10t i had came with the Lehner motor from overseas...

just that they're not worth much more than $8 i don't think. $7.90 shipped ANYWHERE in the world.

never had any probs with the threads in the base, very solid i thought. use a dabble of locktite (not the impossible stuff, just medium hold).

1BadJeepBruiser · 07-25-2006, 07:12 AM

Quote:

Originally Posted by WRXronald

10t 48p (or .5 modules i think) 3.2mm or '1/8' shaft....

i use these on my lehner motor on my trex helicopter... also used on Ikarus ECO8 heli...

see this site:

http://www.hobby-lobby.com/ecoparts.htm

"IK67108 PINION 10T 3.2mm $ 4.90
IN STOCK"

not to rain on the 44 of them pararde from RRP... RRP may very well make a better quality one, i don't know?

the first one i used seemed to wear out more quickly on the heli. and began to wear the plastic main gear mesh a bit as well too, but i think the 1st 10t i had came with the Lehner motor from overseas...

just that they're not worth much more than $8 i don't think. $7.90 shipped ANYWHERE in the world.

never had any probs with the threads in the base, very solid i thought. use a dabble of locktite (not the impossible stuff, just medium hold).

I am aiming for 7$ shipped hopefully, we will see what happens.
Mike

cartronicshn · 07-25-2006, 09:01 AM

1badjeepbruiser, put me up for 4 as soon as you get them

, good luck on this deal

1BadJeepBruiser · 07-25-2006, 09:34 AM

Quote:

Originally Posted by cartronicshn

1badjeepbruiser, put me up for 4 as soon as you get them

, good luck on this deal

sounds good guys, Once I have them in hand ill put a thread up in the vendors forum for them.

Mike

cartronicshn · 07-25-2006, 09:46 AM

hurry

, j/k.. no really hurry

DimeBag · 07-25-2006, 01:02 PM

mike, put me down for 3 at the MJ. ill DEFINATLY take them off you.

DUIdirk · 07-25-2006, 01:42 PM

put me down for 2!

1BadJeepBruiser · 07-25-2006, 02:12 PM

Will do

Mike

gregrocks90046 · 07-25-2006, 04:08 PM

Quote:

Originally Posted by 1badjeepbruiser

I am aiming for 7$ shipped hopefully, we will see what happens.
Mike

please reserve one for me! especially since you got such a smoking deal on those beadlocks!

fuzzhead · 07-25-2006, 10:43 PM

i will take one

DUIdirk · 07-27-2006, 02:07 PM

You should have some 10's and 11's made along with these for the next batch

I would definitely scoop some of those up.

Brandon · 07-28-2006, 08:34 AM

Sounds great Mike, im interested as well

07-24-2006, 07:50 PM	#47
rubicon20032003 Rock Stacker Join Date: Mar 2004 Posts: 87	Mike If you get them before mj .Can you bring me three of them for me? Last edited by rubicon20032003; 07-25-2006 at 03:28 PM.

07-24-2006, 08:43 PM	#48
WRXronald Rock Crawler Join Date: Jan 2006 Location: Nebiru, OuterSpace Posts: 500	. edit... sorry. Last edited by WRXronald; 07-24-2006 at 09:04 PM.

07-24-2006, 09:03 PM	#49
WRXronald Rock Crawler Join Date: Jan 2006 Location: Nebiru, OuterSpace Posts: 500	.. 10t 48p (or .5 modules i think) 3.2mm or '1/8' shaft.... i use these on my lehner motor on my trex helicopter... also used on Ikarus ECO8 heli... see this site: http://www.hobby-lobby.com/ecoparts.htm "IK67108 PINION 10T 3.2mm $ 4.90 IN STOCK" not to rain on the 44 of them pararde from RRP... RRP may very well make a better quality one, i don't know? the first one i used seemed to wear out more quickly on the heli. and began to wear the plastic main gear mesh a bit as well too, but i think the 1st 10t i had came with the Lehner motor from overseas... just that they're not worth much more than $8 i don't think. $7.90 shipped ANYWHERE in the world. never had any probs with the threads in the base, very solid i thought. use a dabble of locktite (not the impossible stuff, just medium hold). Last edited by WRXronald; 07-24-2006 at 09:19 PM.

07-24-2006, 03:29 PM	#41
DUIdirk Pebble Pounder Join Date: Sep 2005 Location: Bellevue Posts: 122	I cant really tell if this is 32 pitch or 48, and cant find any info on it. Can anyone tell by looking? http://www.ikarus-modellbau.de/onlin...=265&anid=4330

07-24-2006, 03:50 PM	#42
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	It is either 48p or mod .5

07-24-2006, 04:21 PM	#44
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	It wouldnt be worth your time in my opinion. You will pay almost as much for a star as the profit you make. It would be nice to get somebody on the board to carry them though.

07-24-2006, 05:11 PM	#45
cartronicshn I wanna be Dave Join Date: May 2006 Location: HONDURAS...ROCK HEAVEN Posts: 5,076	i can take 10 for the $4 plus shipping

07-24-2006, 06:36 PM	#46
1BadJeepBruiser Sinking with the ship Join Date: Mar 2005 Location: El Capitan...sole survivor and sinking fast Posts: 8,864	Well guys I am going to be a vendor for these, I am going to place an order with them tommorow for the current ones in stock, and then I will go from there MIke

07-25-2006, 09:01 AM	#51
cartronicshn I wanna be Dave Join Date: May 2006 Location: HONDURAS...ROCK HEAVEN Posts: 5,076	1badjeepbruiser, put me up for 4 as soon as you get them , good luck on this deal

07-25-2006, 09:46 AM	#53
cartronicshn I wanna be Dave Join Date: May 2006 Location: HONDURAS...ROCK HEAVEN Posts: 5,076	hurry , j/k.. no really hurry

07-25-2006, 01:02 PM	#54
DimeBag Newbie Join Date: Jun 2005 Location: Pittsburgh Posts: 44	mike, put me down for 3 at the MJ. ill DEFINATLY take them off you.

07-25-2006, 01:42 PM	#55
DUIdirk Pebble Pounder Join Date: Sep 2005 Location: Bellevue Posts: 122	put me down for 2!

07-25-2006, 02:12 PM	#56
1BadJeepBruiser Sinking with the ship Join Date: Mar 2005 Location: El Capitan...sole survivor and sinking fast Posts: 8,864	Will do Mike

Sponsored Links

07-25-2006, 10:43 PM	#58
fuzzhead Rock Crawler Join Date: Dec 2004 Location: Grand Forks, ND Posts: 620	i will take one

07-27-2006, 02:07 PM	#59
DUIdirk Pebble Pounder Join Date: Sep 2005 Location: Bellevue Posts: 122	You should have some 10's and 11's made along with these for the next batch I would definitely scoop some of those up.

07-28-2006, 08:34 AM	#60
Brandon Im Brandon Join Date: Feb 2005 Location: Colfax, CA Posts: 8,156	Sounds great Mike, im interested as well

RCCrawler Forums

Thread: Looking for 9t 48p pinions WE CAN GET THEM!!! SEE INSIDE