|
| LinkBack | Thread Tools | Display Modes |
06-07-2012, 12:27 AM | #1 |
I wanna be Dave Join Date: Oct 2006 Location: Milwaukie OR
Posts: 2,078
| CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing!
I am now making these for customers on order. They can be done with any of my tubes. For choices, see below: EDITED: 9/11/12 These are now being made with the new PREMIUM version. Pics updated below. I will also be offering soon, conversion kits. I will post links when I do. Just a quick list of the new housing options that will be available soon: -Wide splined -Wide non-splined -Stock width splined -F/R "Conversion Kits" for the XR10 ultimate sportsman goodies. Will include all the necessary parts to convert to universals, XR rear shafts, as well as having options on hop up parts. Stay tuned.... CreationFab Delrin AX10 Tubes =NEW STYLES= *NOW TAKING ORDERS* Purchase here: CreationFab - CreationFab Parts Housings This is just a pic of what I did for a customer so I took a couple crappy pics for now until I can make more. For $60 you can have a wide or stock width splined housing ready to go. This includes all the hardware, with the caster set and tubes glued to the back half of the case. For $50 you can have a wide or stock width NON-splined housing ready to go. This includes all the hardware, with the caster set and tubes glued to the back half of the case. The wide splined housing below is meant to directly drop in stock XR-10 universals, XR-10 Chubs, and XR-10 Knuckles, giving you more steering and stronger axles PM me for more info. Thanks for the continuing support. Last edited by Chris_The_Battery_Man; 10-01-2012 at 10:21 PM. |
Sponsored Links | |
06-07-2012, 01:17 AM | #2 |
D-Wray 4 Prez! Join Date: Aug 2008 Location: Shh
Posts: 2,560
| Re: CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing!
Great idea for the lazy builder like me. |
06-10-2012, 07:47 AM | #3 |
Pebble Pounder Join Date: Jun 2010 Location: bowling green
Posts: 149
| Re: CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing!
That sweet I've been thinking bout doing the mod but don't have the tools great price too what would the price be for a completed axle with stock hubs and knucks
Last edited by tmaxxdout; 06-10-2012 at 07:54 AM. |
06-11-2012, 12:29 AM | #4 |
I wanna be Dave Join Date: Oct 2006 Location: Milwaukie OR
Posts: 2,078
| Re: CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing!
Would you want universals, bearings, and a tie rod?
|
06-11-2012, 06:09 AM | #5 |
Pebble Pounder Join Date: Jun 2010 Location: bowling green
Posts: 149
| Re: CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing!
Probaly just the cvds and bearings I can make my own tierod. If I did the standard width do you cut down the cvds or is that something I would have to do myself I'm just tryin to get a price range so I can start saving up I've been wanting to do this for awhile thanks
Last edited by tmaxxdout; 06-11-2012 at 06:22 AM. |
06-21-2012, 06:22 AM | #6 |
Quarry Creeper Join Date: Nov 2010 Location: right here!
Posts: 300
| Re: CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing!
This is just AWESOME!!! this would be the next part on the shopping list. How strong are they? I never really used this kind of material thus I have to ask this newbie question. |
07-01-2012, 01:30 PM | #7 |
RCC Addict Join Date: Nov 2011 Location: the not so white north
Posts: 1,299
| Re: CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing!
Ok so I tried to put together my custom axle I got from you with the splined ends for xr chub,knuckle and axles. I got the first VP chub about half way on and its stuck. I can not get it to go on further or get it to come off. Mind you I am trying to be nice as they are brand new VP hubs and don't really want them scrached to s***!!! Any advice to get these things together without them getting stuck or having to trash brand new VP chubs? The fit to me is way to tight!!! I can not even get them started with out hitting it pretty good with a hammer ( which I cringe every swing). Please help!!! Thanks |
07-02-2012, 02:02 PM | #8 |
I wanna be Dave Join Date: Oct 2006 Location: Milwaukie OR
Posts: 2,078
| Re: CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing!
Thats' just the way they are. They are tight as advertised. Use a piece of wood on the chubs, then hit the wood lightly with the housing on a firm surface until it goes on. If you have a small enough piece of wood to go through the ears, and press on the round part, that would be better. PM me if you need more help. I would be glad to help |
07-05-2012, 12:45 AM | #9 |
RCC Addict Join Date: Nov 2007 Location: CALI "209"
Posts: 1,970
| Re: CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing!
Can you use any aftermarket XR10 tie rod?
|
07-05-2012, 12:51 AM | #10 |
I wanna be Dave Join Date: Oct 2006 Location: Milwaukie OR
Posts: 2,078
| Re: CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing!
Should be able to
|
07-09-2012, 11:51 AM | #11 |
I wanna be Dave Join Date: Oct 2006 Location: Milwaukie OR
Posts: 2,078
| Re: CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing! |
08-06-2012, 11:12 AM | #12 |
I wanna be Dave Join Date: Oct 2006 Location: Milwaukie OR
Posts: 2,078
| Re: CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing! |
08-29-2012, 04:44 PM | #13 |
RCC Addict Join Date: Apr 2008 Location: Georgia
Posts: 1,590
| Re: CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing!
PM sent |
09-11-2012, 11:28 AM | #14 |
I wanna be Dave Join Date: Oct 2006 Location: Milwaukie OR
Posts: 2,078
| Re: CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing!
Post 1 updated with new options |
09-11-2012, 12:35 PM | #15 |
Pebble Pounder Join Date: Sep 2011 Location: Joliet
Posts: 181
|
Awesome
|
10-01-2012, 10:21 PM | #16 |
I wanna be Dave Join Date: Oct 2006 Location: Milwaukie OR
Posts: 2,078
| Re: CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing!
Post 1 updated with a link to purchase
|
10-28-2012, 01:32 PM | #17 |
Quarry Creeper Join Date: Nov 2011 Location: Odessa Mo
Posts: 231
| Re: CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing!
I want to order this. Pm sent, PayPal ready!
|
12-19-2012, 07:45 AM | #18 |
I wanna be Dave Join Date: Dec 2008 Location: ?
Posts: 5,055
| Re: CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing!
Do you have a pic of the straight shafts cut to size? maybe some sizes also. |
12-22-2012, 08:04 PM | #19 |
I wanna be Dave Join Date: Oct 2006 Location: Milwaukie OR
Posts: 2,078
| Re: CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing!
I dont unfortunately. Turns out 2 long sides trilled down are a better option. People seem to be having good luck with 2 shorts, but you get more engagement from 2 long side XR shafts cut down |
CreationFab's Pre-Fabbed AX-10/XR-10 hybrid housing! - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CreationFab's quickly thrown together Sporty | Chris_The_Battery_Man | Axial AX-10 Scorpion | 12 | 06-26-2012 09:55 AM |
need something fabbed up | LS1Armyboy | Paint and Body | 1 | 03-13-2012 03:04 AM |
***Berg XR10 Hybrid Axle Pre-order*** | highlandcrawler | EnRoute Berg | 28 | 03-12-2012 10:35 AM |
fabbed up a new rear bumber | matt_22 | General Scale Talk | 7 | 02-10-2012 11:50 AM |
Fabbed a bumper for my xj | west virginia krawler | Chit Chat | 18 | 10-08-2007 06:44 PM |
Thread Tools | |
Display Modes | |
| |