RCCrawler Forums

RcBro · 01-13-2013, 08:06 PM

RcBros has taken over production the VP Xr10 or Wraith Knuckle Weight system!

Each mount is slotted to allow you to move your weight system forward to back to fit your vehicle needs. We have added a second design for those running an single piece double eared arm.

Single Arm Version

Double Arm Verison

AX10 8* Version

Bully 2 Version

A pair of holders is $10.00

We have changed the Brass rings slightly. Adding 3 different thicknesses in full weights and 2 in the half weights. Each also features 2 sets of holes, one set tapped, and one set untapped for through holes.

Full Brass Thickness Weights:
.25 – 1.3oz
.125 – .7oz
.090- .5oz

Half Brass Thickness Weights:
.25 – .7oz
.125 – .4oz

Prices have been reduced to help you all out as well! All available here:
RcBros Hobbies

jeeper_05 · 01-13-2013, 10:09 PM

Ordering now, but it says 6.00 for the holders on here, and 8 on the site?

RcBro · 01-13-2013, 10:31 PM

Typo thanks

Solitaire · 01-13-2013, 10:35 PM

Are the slots in the holders compatible with the bolt pattern on VP weights?

RcBro · 01-13-2013, 10:36 PM

These are not sorry

EverettY · 01-13-2013, 11:05 PM

How thick were the weights Tomi made for the holder? Were they 1/8" as well? Cause these look thinner.... And how many weights can you fit with a 725 hub?

Oz Bruiser · 01-13-2013, 11:25 PM

Quote:

Originally Posted by EverettY

How thick were the weights Tomi made for the holder? Were they 1/8" as well? Cause these look thinner.... And how many weights can you fit with a 725 hub?

Don't know the imperial measurements, but Tomi's weights were 5mm thick and a fraction heavier per weight.

Sent from my GT-I9300 using Tapatalk 2

Tomy · 01-13-2013, 11:27 PM

Superb finish on the parts, William!

Glad to see someone with the proper resources to make these take over.

EverettY · 01-13-2013, 11:39 PM

Quote:

Originally Posted by Oz Bruiser

Don't know the imperial measurements, but Tomi's weights were 5mm thick and a fraction heavier per weight.

Sent from my GT-I9300 using Tapatalk 2

OK... than these are thinner... Tomi's would have been about .196" and these are .125"

Oz Bruiser · 01-14-2013, 12:23 AM

On Tomi weights on wraith knuckles you could fit an additional half weight on the inside of the Knuckle. If these new weights are thinner maybe it may be possible to squeeze 2 inside the knuckle which may allow extra weights which may not require as larger hub. Maybe RC Bros(William) can answer this.

Sent from my GT-I9300 using Tapatalk 2

RcBro · 01-14-2013, 06:47 AM

Quote:

Originally Posted by Oz Bruiser

On Tomi weights on wraith knuckles you could fit an additional half weight on the inside of the Knuckle. If these new weights are thinner maybe it may be possible to squeeze 2 inside the knuckle which may allow extra weights which may not require as larger hub. Maybe RC Bros(William) can answer this.

Sent from my GT-I9300 using Tapatalk 2

This is correct. As far as how many will fit on a 725 I don't know for sure to be honest.

EverettY · 01-14-2013, 09:52 AM

Quote:

Originally Posted by RcBro

This is correct. As far as how many will fit on a 725 I don't know for sure to be honest.

Well I guess since they are .125" you could fit 5 on the outside with a 725 making it .625" and at least 1 on the inside... So that would mean you could run at leas 6 weights per side which would be 2.04 oz per side... Not bad at all

That is if you are running half weights...

JimmyJam · 01-18-2013, 05:47 AM

Hiyah!!! Got a couple mounts ordered from ya William! I'll oder the weights to go on them in a couple more weeks!! Thanks Buddy!!!

RcBro · 01-19-2013, 02:28 PM

Hey Guys,
The weights are back in stock and have been upgraded slightly!! Each weight features a pair of taped 3mm holes and a pair of 1/8 through holes for easy mounting convenience.

Highlucks · 01-21-2013, 11:07 PM

Nice work Will, and love the innovative double hole.

gpilot2000 · 01-24-2013, 07:22 AM

is the holder still available ? i dont see it on your site.

RcBro · 01-24-2013, 08:44 AM

Sorry for the delay, we just switched over to a new site and got a few bugs to work out. I will get them added this lunch break.

RcBro · 01-24-2013, 01:28 PM

Quote:

Originally Posted by gpilot2000

is the holder still available ? i dont see it on your site.

Everything can be found here:
RCBros » Knuckle Weights

Thanks!

Colgout · 01-24-2013, 06:45 PM

Does it have the same bolt pattern as the the original Tomy's weight?

cliff1119 · 01-24-2013, 06:48 PM

Sent payment yesterday I'm still good right

01-13-2013, 08:06 PM	#1
RcBro RcBros Hobbies Join Date: Nov 2005 Location: Oregon Posts: 4,646	RcBros Knuckle Weight System for VP XR10 and Wraith Knuckles RcBros has taken over production the VP Xr10 or Wraith Knuckle Weight system! Each mount is slotted to allow you to move your weight system forward to back to fit your vehicle needs. We have added a second design for those running an single piece double eared arm. Single Arm Version Double Arm Verison *AX10 8 Version Bully 2 Version** A pair of holders is $10.00 We have changed the Brass rings slightly. Adding 3 different thicknesses in full weights and 2 in the half weights. Each also features 2 sets of holes, one set tapped, and one set untapped for through holes. Full Brass Thickness Weights: .25 – 1.3oz .125 – .7oz .090- .5oz Half Brass Thickness Weights: .25 – .7oz .125 – .4oz Prices have been reduced to help you all out as well! All available here: RcBros Hobbies Last edited by RcBro; 05-23-2017 at 10:53 PM.

01-13-2013, 10:09 PM	#2
jeeper_05 RCC Addict Join Date: Jun 2005 Location: Prosser Posts: 1,278	Re: RcBros Knuckle Weight System for VP XR10 and Wraith Knuckles Ordering now, but it says 6.00 for the holders on here, and 8 on the site?

01-13-2013, 10:35 PM	#4
Solitaire RCC Addict Join Date: Oct 2011 Location: British Columbia Posts: 1,487	Re: RcBros Knuckle Weight System for VP XR10 and Wraith Knuckles Are the slots in the holders compatible with the bolt pattern on VP weights?

01-13-2013, 11:05 PM	#6
EverettY E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR Posts: 3,591	Re: RcBros Knuckle Weight System for VP XR10 and Wraith Knuckles How thick were the weights Tomi made for the holder? Were they 1/8" as well? Cause these look thinner.... And how many weights can you fit with a 725 hub?

01-13-2013, 11:27 PM	#8
Tomy RCC Addict Join Date: Oct 2008 Location: Finland Posts: 1,265	Re: RcBros Knuckle Weight System for VP XR10 and Wraith Knuckles Superb finish on the parts, William! Glad to see someone with the proper resources to make these take over.

01-13-2013, 10:31 PM	#3
RcBro RcBros Hobbies Join Date: Nov 2005 Location: Oregon Posts: 4,646	Typo thanks

01-13-2013, 10:36 PM	#5
RcBro RcBros Hobbies Join Date: Nov 2005 Location: Oregon Posts: 4,646	These are not sorry

01-14-2013, 12:23 AM	#10
Oz Bruiser RCC Addict Join Date: Jun 2009 Location: Australia Posts: 1,703	On Tomi weights on wraith knuckles you could fit an additional half weight on the inside of the Knuckle. If these new weights are thinner maybe it may be possible to squeeze 2 inside the knuckle which may allow extra weights which may not require as larger hub. Maybe RC Bros(William) can answer this. Sent from my GT-I9300 using Tapatalk 2

01-18-2013, 05:47 AM	#13
JimmyJam Quarry Creeper Join Date: Sep 2010 Location: Port St Lucie Posts: 484	Re: RcBros Knuckle Weight System for VP XR10 and Wraith Knuckles Hiyah!!! Got a couple mounts ordered from ya William! I'll oder the weights to go on them in a couple more weeks!! Thanks Buddy!!!

01-19-2013, 02:28 PM	#14
RcBro RcBros Hobbies Join Date: Nov 2005 Location: Oregon Posts: 4,646	Re: RcBros Knuckle Weight System for VP XR10 and Wraith Knuckles Hey Guys, The weights are back in stock and have been upgraded slightly!! Each weight features a pair of taped 3mm holes and a pair of 1/8 through holes for easy mounting convenience.

01-21-2013, 11:07 PM	#15
Highlucks Try to Bend it Join Date: Aug 2009 Location: Perth Australia Posts: 3,163	Re: RcBros Knuckle Weight System for VP XR10 and Wraith Knuckles Nice work Will, and love the innovative double hole.

01-24-2013, 07:22 AM	#16
gpilot2000 Rock Stacker Join Date: Jun 2009 Location: Indonesia Posts: 83	Re: RcBros Knuckle Weight System for VP XR10 and Wraith Knuckles is the holder still available ? i dont see it on your site.

01-24-2013, 08:44 AM	#17
RcBro RcBros Hobbies Join Date: Nov 2005 Location: Oregon Posts: 4,646	Sorry for the delay, we just switched over to a new site and got a few bugs to work out. I will get them added this lunch break.

01-24-2013, 06:45 PM	#19
Colgout Rock Crawler Join Date: Aug 2011 Location: Perth west oz Posts: 944	Re: RcBros Knuckle Weight System for VP XR10 and Wraith Knuckles Does it have the same bolt pattern as the the original Tomy's weight?

01-24-2013, 06:48 PM	#20
cliff1119 Quarry Creeper Join Date: Jan 2012 Location: on the other side of the tracks from baldy Posts: 380	Re: RcBros Knuckle Weight System for VP XR10 and Wraith Knuckles Sent payment yesterday I'm still good right

Sponsored Links

RcBros Knuckle Weight System for VP XR10 and Wraith Knuckles - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nordic Crawler Design Knuckle Weight System for VP XR10 and Wraith Knuckles	Tomy	Axles, Trannys, T-case	94	04-18-2014 09:44 AM
BMRC Knuckle Weight System for XR10 GIVEAWAY	Blue Monkey RC	Axial XR10	103	08-10-2012 10:18 AM

RCCrawler Forums

Thread: RcBros Knuckle Weight System for VP XR10 and Wraith Knuckles