RcBros Front and Rear Berg Tubes

[RcBro]

When it comes to a stock berg tube you lack three things that are extremely important when competing; Weight, Diameter and Adjust ability. Our front Berg tubes have all these important attributes and all the details can be found below!

Our tubes are constructed of ultra strong and lightweight 7075 aluminum with nearly the entire diameter at .45″ giving you the ultimate in clearance!The tubes also feature an adjustable 4 link mount and splined tube ends allowing for a quick and easy splined C-Hub that will need to be installed by the customer (minor fab skills require, a drill and a tap are needed)

Each link mount features diamond etched degree marks as well as a single etched mark on the axle tube which truly allows setting the link position a snap. Align both to your desired locations, mark the hole location and drill and tap. Once the first hole is set, You follow through with a second securing the mount to the tube. Red loc-tite or Green is a must.

The outer tube is splined specifically for a Vanquish splined C-Hub. This allows adjusting caster a quick and painless process. For those running not Splined C's, we do offer a machining service. Or some dremel work and they will slide right on!

Our tubes come pre-notched and a provided servo mount included allowing the customer to quickly add a servo of there choice. Please note the buyer will need to create there own servo shims to shim the servo to there desired height.

All these combined the entire kit comes in at 43 grams keeping the weight low! Lightweight, adjustable and small in size, this is the ultimate combination!

Complete Front set is $75.00 and rear is $68.00!!
Available now at Berg

Customer Rides:

[RcBro]

Well they are now available Caution I suck at picture taking when it comes to trying to capture high quality photos. So bare with me.



Each tube is constructed of 7075 aluminum with nearly the entire diameter at .45" giving you the ultimate in clearance! Also featuring an adjustable 4 link mount this tube is sure to keep options open.

Key Features:
Each link mount features diamond etched degree mounts and each tube features a solid etched line. This allows the user to accurately set both mounts in the same position. Align both to your desired locations and widths, mark the hole location and drill and tap. The mounts have 1 pre-drilled hole. Once the first hole is set, Follow through with the second.





The outer bearing is held in via a c-clip. These c-clips are a one time use clip and with that in mind we have notched the tube end for easy clip removable. 2 extra clips will be included with each order. If more are desired they are available for purchase separately.

Lastly, a spacer is included to separate the hex pin away from the bearing, this is there to keep the offset spaced out to keep the wheel from digging into the aluminum.
All these combined the entire kit comes in at 40 grams keeping the weight out of the rear allowing for ultimate tunability! Lightweight, adjustable and small in size, this is the ultimate combination!




Each kit will be $68.00 plus shipping.

NOTE: This set will not currently fit the Dlux Aluminum Axle shafts

Available Here:
RCBros » RcBros Berg Rear Axle Tube

Customer Rides:

[RcBro]

Install Instructions Provided by SourDoJack!!
How to install: RcBros light weight 7075 tubes!!

[EDGE]

Front tubes ordered.

[RcBro]

Rear Tubes now in stock!

[EDGE]

I've got my front tubes installed and all set up. Love your work man! Great product.

[gpilot2000]

Front and rear tubes , link mount, weight holder and steering arm paid ( order #948 ). Please send the splinned front tubes for xr10/wraith.

Thanks in advance

[RcBro]

Originally Posted by gpilot2000

Front and rear tubes , link mount, weight holder and steering arm paid ( order #948 ). Please send the splinned front tubes for xr10/wraith.

Thanks in advance

Thank you for your order! I am currently in transit to Nationals so your order will be delayed till next week. I apologize for the delay and appreciate your order!

[MR.VERTICAL]

Pick up some more front at the NATs and just ordered some rear tubes these thing are great

[MR.VERTICAL]

Dam fast got them today with some other googies.

[RcBro]

Glad they got there fast!

[RcBro]

Plenty in stock. Do you want a light tube that's strong with thread holds that will last? This these are for you!

[Monstergt]

What bearing does the rear tubes require?

[EDGE]

Originally Posted by Monstergt

What bearing does the rear tubes require?

6x11x4mm if you're using CBRB axles

[MR.VERTICAL]

All done these thing are great.



With xr-c and ax10 knuckle's

[J-FAB NOR-CAL]

Front and rears on the way

[twistedjeep]

Someone please let me know what axle shafts are used with these tubes and berg cases with vanquish chubs and wraith knuckles.

Thanks

[RcBro]

Originally Posted by twistedjeep

Someone please let me know what axle shafts are used with these tubes and berg cases with vanquish chubs and wraith knuckles.

Thanks

If your running the Wraith Chub and knuckle setup you will need SDS 300 HD's or modified XR10 shafts from ErikDLux . If running the DLux shafts your tubes to will to be drilled out to accommodate the large shaft. I've done one set this way with a drill bit and hand drill.

Option two is to run ax10 c hubs and knuckles with standard SDS 300's.

Sadly the shaft market is currently holding us back.

[david511]

very nice work your berg tube
soon the box?

[RcBro]

Thanks for the post! Congrats on the First place finish!