JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options

[6sharky9]

Any chance you have a website link you could send me or post up?

[monkeyracer]

Originally Posted by 6sharky9

Any chance you have a website link you could send me or post up?

Still working on that, so no website right now. Everything is here in this thread or the other vendor thread I have in the chassis section.

[6sharky9]

Originally Posted by monkeyracer

Still working on that, so no website right now. Everything is here in this thread or the other vendor thread I have in the chassis section.

Ok ty..I like the anti squat pieces..thinking about getting a set.

[monkeyracer]

They are a great inexpensive performance option, but if you are on the fence, the first batch was just sent out, so I expect some pics and info from those that have purchased them to surface in the next week or so.

[6sharky9]

Originally Posted by monkeyracer

They are a great inexpensive performance option, but if you are on the fence, the first batch was just sent out, so I expect some pics and info from those that have purchased them to surface in the next week or so.

Sounds good..ty..will be looking.

[DV8ion]

Order placed

[grunt95]

Originally Posted by monkeyracer

Snapped a pic of the blue parts before I got these in the mail:



The phone camera saturates the color a little, so the pic above shows them a little deeper blue than in reality.

Also have red and white available as well.

that BLUE looks SICK! cant wait to get mine! im assuming that my order?

[monkeyracer]

Originally Posted by grunt95

that BLUE looks SICK! cant wait to get mine! im assuming that my order?

Yes, part of it ... you'll see when you get the package...

The blue looks pretty sweet, I'd love to see some pics on your rig once you get these installed.

[spunkysandoval]

It would be really cool if you integrated a panhard mount into the CMS bracket since most people that go CMS do a panhard.

[monkeyracer]

Originally Posted by spunkysandoval

It would be really cool if you integrated a panhard mount into the CMS bracket since most people that go CMS do a panhard.

I am working on it as we speak. I just want to make sure the geometry is right and everything lines up nicely. Also working on the dual servo version, just making sure I leave enough options available for servo winch set-ups.

[Generis]

Great looking stuff, sir!!

[monkeyracer]

Originally Posted by Generis

Great looking stuff, sir!!

Thank you Chris, I appreciate that. I've been working hard on these as well as my other future products, and I hope the community likes them.



I wanted to note there will be a change to the truss design slightly, so for those that have already ordered one, check your email, you should have a note from me about that. I hope to get the new design finished by Friday.


Thanks for everyone's support, some of the first orders should be arriving today, so hopefully there will be some more pics posted.

[justinart24]

Cool unit! Got any pictures on how close it gets to the drivelines? Wonder if this might help the wroncho builds.

[monkeyracer]

Originally Posted by justinart24

Cool unit! Got any pictures on how close it gets to the drivelines? Wonder if this might help the wroncho builds.

All my existing builds were a little too far away from stock SCX10 geometry to show, but I've got a G6 JK coming tomorrow that I can post some pics of the easy installation process.


Anyone get their trusses? Initial impressions? Installed Pics?
Don't be afraid to post up.

[grunt95]

like i said in the other thread i did get mine but i totally spaced out that i have no links to mount my axles to the chassis with. soo i will post pics when they come. I do have to say that i have two sets of stress marks on my parts one set on the rear side of the truss and on the shock risers right where it curves to go around the skid plate piece.

[monkeyracer]

Originally Posted by grunt95

like i said in the other thread i did get mine but i totally spaced out that i have no links to mount my axles to the chassis with. soo i will post pics when they come. I do have to say that i have two sets of stress marks on my parts one set on the rear side of the truss and on the shock risers right where it curves to go around the skid plate piece.

PM me a pic of the stress marks please. I would like to see where the stress marks are to hopefully make the new version better. This was on the one inside the bag, not the other one in the envelope, right?

[jeepnvinny]

You know what be cool... if you could develop a system that would work for a scx10 axles wraith. I would love to have a cms with the correct geometry and your product design looks real nice. Any thoughts on that?

[monkeyracer]

Originally Posted by jeepnvinny

You know what be cool... if you could develop a system that would work for a scx10 axles wraith. I would love to have a cms with the correct geometry and your product design looks real nice. Any thoughts on that?

Do you mean a system that lets you use Wraith Axles on the SCX frame?
If so, there is something coming soon that will allow XR10/wraith width axles to have a panhard. Still under development, but stay tuned!

[jeepnvinny]

No, the other way around...

[monkeyracer]

Originally Posted by jeepnvinny

No, the other way around...

Oh, like this:

Project "Wringo" - 1.9 Wraith + Dingo

Look closely at the pics...