01-31-2014, 03:07 PM | #81 | |
I wanna be Dave Join Date: Oct 2008 Location: Golden
Posts: 2,588
| Re: JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options Quote:
Generally, parts are made on an As-Ordered basis, rather than a bunch of parts at a time (exceptions would be the new re-release of the RULR V2's in nylon). As in the first post, the intention is to have any order of normal production parts shipped within 7 days of payment. Special order, or prototype, etc, parts will take just a little longer than that, just due to the extra processing steps. I'll be updating this thread very soon with current options and pictures to help explain what is included in each combo, etc. | |
Sponsored Links | |
01-31-2014, 08:15 PM | #82 |
I wanna be Dave Join Date: Oct 2008 Location: Golden
Posts: 2,588
| Re: JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options
First couple posts updated with new products, combos, and up-to-date information on the different options available. Any questions, please feel free to post up here or send me a PM. Thanks everyone for your support and suggestions! |
01-31-2014, 08:54 PM | #83 |
Quarry Creeper Join Date: Nov 2012 Location: spanish fork
Posts: 435
|
I love this,gotta get the wife on board and I'll be sending you a pm Sent from my VS980 4G using Tapatalk |
01-31-2014, 09:43 PM | #84 | |
Pebble Pounder Join Date: Jun 2011 Location: saint paul
Posts: 162
| Re: JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options Quote:
| |
01-31-2014, 11:46 PM | #85 |
Rock Stacker Join Date: Oct 2013 Location: Nampa
Posts: 95
| Re: JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options
I am happy to report that we gave the rear truss and V3 RULR's a thorough thrashing at comps tonight and got 2nd and 3rd respectively. (My 11yo and I compete with the same G6) I was also able to climb a section of the course that was impassable prior to the RULR's. |
02-08-2014, 09:43 PM | #86 |
Rock Crawler Join Date: Jan 2012 Location: middle TN
Posts: 612
| Re: JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options
I just ordered a rear 4 link truss from you. Thanks for the great products.
|
02-10-2014, 05:37 PM | #87 | |
I wanna be Dave Join Date: Oct 2008 Location: Golden
Posts: 2,588
| Re: JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options Quote:
Thanks for your order! Printed, and ready to ship first thing tomorrow. | |
02-10-2014, 10:31 PM | #88 |
Quarry Creeper Join Date: Jul 2013 Location: Salem/Portland
Posts: 200
| Re: JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options
R u still gonna do dual cms mounts fot us with a cms and servo winch
|
02-14-2014, 04:39 PM | #89 |
Rock Stacker Join Date: Jul 2011 Location: Crawler Teds Garage
Posts: 69
| |
02-14-2014, 05:26 PM | #90 |
I wanna be Dave Join Date: Oct 2008 Location: Golden
Posts: 2,588
| Re: JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options They do look awesome... Now we all want to see some installed pics!
Last edited by monkeyracer; 02-14-2014 at 05:33 PM. |
02-14-2014, 05:32 PM | #91 | |
I wanna be Dave Join Date: Oct 2008 Location: Golden
Posts: 2,588
| Re: JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options Quote:
The intention is that the above set-up would be how you would mount a steering servo along with a winch servo. The nice thing about the new CMS is it has a place to mount a battery, as well as two spots designated for rod-ends so you can route your winch line to the front of the vehicle. I will try to get a good pic of this over the weekend. I was testing a side by side version, but it just became too hard for most set-ups to get the winch positioned right. I can make custom mounts as well, so if you (anyone) were interested in a somewhat different set-up, please let me know. Hopefully this answers your question. | |
02-25-2014, 04:04 AM | #92 |
Pebble Pounder Join Date: Jun 2011 Location: saint paul
Posts: 162
| Re: JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options
any link lengths for cms and servo link
|
02-26-2014, 11:22 AM | #93 |
I wanna be Dave Join Date: Oct 2008 Location: Golden
Posts: 2,588
| Re: JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options |
02-28-2014, 09:11 PM | #94 |
Rock Crawler Join Date: Mar 2011 Location: USA
Posts: 760
| Re: JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options
Any plans for us Wroncho owners that want to go CMS ????? Sometimes it's nice to buy a part off the shelf..... |
03-01-2014, 07:53 AM | #95 | |
I wanna be Dave Join Date: Oct 2008 Location: Golden
Posts: 2,588
| Re: JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options Quote:
The servo mount would replace the "electronics brace" as a location for the servo mount. I can post a pic of the mount later this afternoon. | |
03-01-2014, 07:17 PM | #96 | |
Rock Stacker Join Date: Sep 2007 Location: Lambertville
Posts: 83
| Re: JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options Quote:
Any pics of how this mounts up to the chassis? I'm curious how you ran the winch line. Thanks | |
03-01-2014, 10:43 PM | #97 |
I wanna be Dave Join Date: Oct 2008 Location: Golden
Posts: 2,588
| Re: JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options |
03-05-2014, 07:53 AM | #98 | |
I wanna be Dave Join Date: Oct 2008 Location: Golden
Posts: 2,588
| Re: JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options Quote:
I haven't finished setting my rig up, but the idea is the winch line runs through the rod ends then out the grill through a dummy winch mounted on the bumper. It would be possible to mount the winch upside down and run the line under the mounts through the bumper as well. You can also see in the pictures the space to put the battery or electronics. I am going to put my battery on these mounts and mount the ESC and radio to the sliders. (This version is a prototype, the production mounts will look a little different than these.) Hope this helps visualize this. Let me know if there is anything else you would like to see. Thanks! | |
03-10-2014, 07:22 PM | #99 |
Rock Crawler Join Date: May 2009 Location: Hillsboro, OR / Kapolei, Hi
Posts: 695
| Re: JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options
LOVING these products. I will definitely be placing an order soon.
|
03-15-2014, 12:03 AM | #100 |
Quarry Creeper Join Date: Feb 2012 Location: Canada
Posts: 458
| Re: JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options
You still making the CMS and battery mount for the SCX10? Let me know
|
JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CMS Kit for SCX10 with Panhard | Blue Monkey RC | Chassis and Suspension | 76 | 05-28-2014 11:46 AM |
| |