|
| LinkBack | Thread Tools | Display Modes |
12-09-2013, 08:18 AM | #1 |
Wanna get? Gotta want. Join Date: Apr 2010 Location: SLC, UT
Posts: 7,052
| Wraith/AX10/SCX10 pinion bearing mod
These are now available on my site. $20 per housing Bearings are supplied with the mod.
There has been a change...... I went from a 5x16 bearing to a 5x13 bearing. This leaves all the crucial materiel (no longer as deep) and then some but still gives a much better bearing than stock. In our testing we still did not wear out a bearing and had no housing issues. In the picture there is a 5x13 bearing installed and to the lower left there is a 5x13 next to a stock 5x10 so you can see just how much bigger it still is. AX10/SCX10 housings are now available! I do not have a dedicated section for these on my website so they are under "universal". Last edited by Harley; 04-28-2014 at 05:15 PM. |
Sponsored Links | |
12-09-2013, 11:55 AM | #2 |
Pebble Pounder Join Date: Nov 2012 Location: madera
Posts: 149
| Re: Wraith pinion bearing mod
that is a nice mod i need to have my axles done .
|
12-09-2013, 12:02 PM | #3 |
Pebble Pounder Join Date: Nov 2012 Location: madera
Posts: 149
| Re: Wraith pinion bearing mod
how long would it be if i send you my axles ? i would love to send you my 2 sets of axes to get done.
|
12-09-2013, 01:08 PM | #4 |
Wanna get? Gotta want. Join Date: Apr 2010 Location: SLC, UT
Posts: 7,052
| Re: Wraith pinion bearing mod
It would take me either the same day or 1 extra days to get it out.
|
12-09-2013, 05:58 PM | #5 |
Pebble Pounder Join Date: Nov 2012 Location: madera
Posts: 149
| Re: Wraith pinion bearing mod
ok thats coo ill have to get them out
|
12-09-2013, 06:19 PM | #6 |
No idea what I'm doing Join Date: Oct 2008 Location: Underground, CO
Posts: 4,529
| Re: Wraith pinion bearing mod
I have a few people here I need to talk to |
12-09-2013, 08:09 PM | #7 |
RCC Addict Join Date: Dec 2007 Location: Rochester Hills
Posts: 1,773
| Re: Wraith pinion bearing mod
Would you be willing to do this service on my Vp Currie center sections? I could just send the two centers.... This mod would greatly improve the reliability of my Class 3 rig I'm building. Great idea once again man Thanks, Farmer |
12-10-2013, 07:24 AM | #8 |
Wanna get? Gotta want. Join Date: Apr 2010 Location: SLC, UT
Posts: 7,052
| Re: Wraith pinion bearing mod
I am not sure if it even can be done on a Currie center. I would have to take a look at it. Can you tell if there is enough material in that area?
|
12-13-2013, 10:28 PM | #9 |
Pebble Pounder Join Date: Nov 2012 Location: madera
Posts: 149
| Re: Wraith pinion bearing mod
whats the new bearing size you put in for the mod ?
|
12-14-2013, 08:56 AM | #10 |
Wanna get? Gotta want. Join Date: Apr 2010 Location: SLC, UT
Posts: 7,052
| Re: Wraith pinion bearing mod
16mm
|
12-19-2013, 04:46 PM | #11 |
Wanna get? Gotta want. Join Date: Apr 2010 Location: SLC, UT
Posts: 7,052
| Re: Wraith pinion bearing mod
Ok, never mind all that weird pricing. I just went and bought a bunch and made them all at once to make things easier on all of us. Now these are at one low price and ready to buy now. |
12-19-2013, 07:22 PM | #12 |
Rock Crawler Join Date: May 2008 Location: Mansfield, PA
Posts: 560
| Re: Wraith pinion bearing mod
Awesome mod...I've been waiting for someone to do this. Now if you can do it to the Vanquish Wraith axles I will throw money at you!! Any chance? . |
12-19-2013, 07:54 PM | #13 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
|
Thats awesome! I believe you will have More of my money soon Erik.. With a pro4 goin in and enough front gear issues with the current 13.5t. Can't go wrong with that price! |
12-19-2013, 09:18 PM | #14 | |
Wanna get? Gotta want. Join Date: Apr 2010 Location: SLC, UT
Posts: 7,052
| Re: Wraith pinion bearing mod Quote:
Sorry, I just think its too risky. | |
12-20-2013, 06:08 AM | #15 | |
Rock Crawler Join Date: May 2008 Location: Mansfield, PA
Posts: 560
| Re: Wraith pinion bearing mod Quote:
I completely understand. But I will say if you decide you want to give it a shot I will send you a brand new set of Vanquish Wraith housings. If you mess them up no big deal...my loss. I'm willing to take the risk and be the guinea pig. Lol If you don't want to, its all good...ill just buy some of your modded plastic axles. . | |
12-20-2013, 08:02 AM | #16 |
Wanna get? Gotta want. Join Date: Apr 2010 Location: SLC, UT
Posts: 7,052
| Re: Wraith pinion bearing mod
Well, thanks to Dan W, he is already going to send me a set to check out. I will let you guys know how it goes. |
12-20-2013, 10:30 AM | #17 |
Rock Crawler Join Date: May 2008 Location: Mansfield, PA
Posts: 560
| Re: Wraith pinion bearing mod
Awesome...cant wait! . |
12-28-2013, 01:14 PM | #18 |
Quarry Creeper Join Date: Jun 2012 Location: Next to you
Posts: 438
| Re: Wraith pinion bearing mod
Have a pro4 in my wraith and just blew up my overdrive gear. How is this mod holding up with this motor? I have been running bushings front and rear internal and external. The external bushing is making the plastic housing lose. Will this mod help with that?
|
12-28-2013, 10:06 PM | #19 | |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Quote:
2x modded housings ordered! Thanks Erik... B-) Edit: I blew up 2 od gear sets in mine, before the power and before the bushings.. not enough mesh on the R&P teeth to hold up to power.. IMO.. | |
12-28-2013, 10:16 PM | #20 |
RCC Addict Join Date: Jan 2011 Location: somewhere near Los Angeles...or a city looking thingy.
Posts: 1,122
| Re: Wraith pinion bearing mod
That looks awesome. Do you think you'd be able to this mod to a scx10 axle in the stock housings?
|
Wraith/AX10/SCX10 pinion bearing mod - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
AS-3 Bearing mod | Kaptain | Axial SCX-10 | 27 | 04-08-2014 11:43 PM |
Bearing mod | chessmaster | Axial XR10 | 10 | 03-17-2011 02:45 PM |
9mm bearing mod | losichris | Axial XR10 | 21 | 10-07-2010 07:18 PM |
Pinion Bearing Walk? | sickfab | HPI Wheely King | 12 | 08-29-2007 01:28 PM |
| |