RCCrawler Forums - 1/8" Titanium Pre-fabbed Drag Links

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Axles, Trannys, T-case (http://www.rccrawler.com/forum/axles-trannys-t-case/)

- - 1/8" Titanium Pre-fabbed Drag Links (http://www.rccrawler.com/forum/axles-trannys-t-case/492123-1-8-titanium-pre-fabbed-drag-links.html)

1/8" Titanium Pre-fabbed Drag Links

http://i370.photobucket.com/albums/o...ps9c7e514b.png

Take the guess work out of replacing your XR10 drag link when you've decided to flip the servo horn in towards the wheel.

Or are you just in need of a replacement for the "not so great" stock drag link that comes with the kit?

These drag links are made to be a direct replacement for either situation. Whether your servo is flipped or mounted the original way, NOTCH EIGHT has an alternative to those bulky Revo rod ends or the small diameter turnbuckle style rod.

Made of Grade 5 1/8" Titanium, threaded with beefy 6/32 thread using small Traxxas ends. A small, lightweight and strong option that is "bolt and go".

Currently there are TWO versions and plans of Bully 2 versions are in the works.

http://i370.photobucket.com/albums/o...psc44850ac.jpg

Version 1 for use with a "flipped" servo on the XR10.

http://i370.photobucket.com/albums/o...ps26014a38.jpg

http://i370.photobucket.com/albums/o...psa5b558eb.jpg

Version 2 for "stock located" servo.

http://i370.photobucket.com/albums/o...psb41c30de.jpg

http://i370.photobucket.com/albums/o...ps7e4456db.jpg

Cost will be $12 shipped within the US.

Please PM me for International shipments.

To order please send payment via Paypal to Sullyman30@gmail.com and be sure to specifiy which version you want.

Re: 1/8" Titanium Pre-fabbed Drag Links

Looking good on my rig ... Quality work !!!! Fast shipping

Re: 1/8" Titanium Pre-fabbed Drag Links

I would really like to order one stock to the xr10..
You dont have tierod aswell??

Re: 1/8" Titanium Pre-fabbed Drag Links

Quote:

Originally Posted by BERG-V3 (Post 4759254)

I would really like to order one stock to the xr10..
You dont have tierod aswell??

PM sent your way. "thumbsup"

Re: 1/8" Titanium Pre-fabbed Drag Links

Will the xr10 tie rod fit an ax/xr hybrid axle?

I remember using those rod ends in the old days. Have y'all had any trouble with them pulling out in nasty binds?

Quote:

Originally Posted by Beest (Post 4788297)

Will the xr10 tie rod fit an ax/xr hybrid axle?

I remember using those rod ends in the old days. Have y'all had any trouble with them pulling out in nasty binds?

The XR10 tierod will work with XR width AX housings. I am currently working on getting some 3/16 titanium in to start producing straight and bent tierods. Should be a week or so.

So far nobody has pulled an end off a draglink. They are on there pretty solid.