MOA Carbon Fiber Motor guards!!!!! 5 Attachment(s) Barry's R/C Carbon Carbon Fiber MOA Motor guards/End bell protectors These Carbon Fiber motor guards wrap around the motor and are not a bolt on style. There is no material between the motor and the motor plate. They have a smooth surface to slide across rocks better. They are a tight fit so they do not spin or slide around on the motor during use. Servo tape is not required unless you have a machined motor can. These fit Berg, Xr-10, bully 2, and super. $35.00 Shipped U.S.P.S Mail Paypal:Barrybelvedere@aol.com International shipping available, buyer pays extra for shipping contact barrybelvedere by private message on RCC or You will get a response sooner thru E-mail Barrybelvedere@aol.com. All questions will be answered as soon as possible. |
Re: MOA Carbon Fiber Motor guards!!!!! My first batch was 11 pairs...5 pairs left as of right now! Ready to ship! |
Re: MOA Carbon Fiber Motor guards!!!!! Sweet! Glad to see these up for sale! |
Re: MOA Carbon Fiber Motor guards!!!!! 4 pairs left |
Re: MOA Carbon Fiber Motor guards!!!!! Getting ready to place an order. Thanks for being a sponsor for the Northeast National Championship."thumbsup" |
Re: MOA Carbon Fiber Motor guards!!!!! Yes sir.... Mr. slick! I will be there AND I will have lots of carbon goodies made just for your event. I will have MOA motor guards, scx-10 4 link/servo mounts for front or rear steer, MRC 4 link/servo/batt plate for the front axle, MRC 4 link plate for the rear, Ax-10 rear 4 link plates, And a New Vertical plate MOA Chassis that weighs 60 grams that i will be using at 2015 ECC! |
Re: MOA Carbon Fiber Motor guards!!!!! I want to see that new chassis. Where is the build thread? |
Re: MOA Carbon Fiber Motor guards!!!!! Quote:
|
Re: MOA Carbon Fiber Motor guards!!!!! I will have 3 of the new chassis at ECC. Possibly one in action. |
Re: MOA Carbon Fiber Motor guards!!!!! 3 pairs left.... A set sold on eBay last night. |
Re: MOA Carbon Fiber Motor guards!!!!! 10 more pairs motor guards made. |
Re: MOA Carbon Fiber Motor guards!!!!! Are these available for 500's ? |
Re: MOA Carbon Fiber Motor guards!!!!! I will know this weekend when I get my hands on a 500 for measurements. |
Re: MOA Carbon Fiber Motor guards!!!!! Quote:
|
Re: MOA Carbon Fiber Motor guards!!!!! I bought a set of these off Ebay A few days ago. Didn't realise you were selling on here as well. Looking forward to seeing how these hold up Vs the BWD ones. ;-) |
Re: MOA Carbon Fiber Motor guards!!!!! The new chassis won 3rd place at ECC this weekend. First time out.[emoji6] Good job Barry! There will be a build thread coming soon to a berg tech section near you.[emoji48] |
Re: MOA Carbon Fiber Motor guards!!!!! After giving away some Motor guards and other carbon parts at ECC...As of right now there are 8 pairs of carbon guards left. |
Re: MOA Carbon Fiber Motor guards!!!!! At ECC Troy and I came to the conclusion that the guards that are already being made will fit the 400'S & 500's if an extra cut is added with a Dremel and cutting wheel so that it will grip around the can tighter. If you would like to order these Motor guards for the 500's or 400's let me know when you place your order if you need me to add the extra cut. |
Re: MOA Carbon Fiber Motor guards!!!!! I am just wondering, does CF conduct electricity? Will it short the motor terminal? $25 is for a pair or each? |
Re: MOA Carbon Fiber Motor guards!!!!! Just sent Paypal. |
All times are GMT -6. The time now is 11:28 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com