|
| LinkBack | Thread Tools | Display Modes |
04-26-2015, 10:51 PM | #1 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| MOA Carbon Fiber Motor guards!!!!! Barry's R/C Carbon Carbon Fiber MOA Motor guards/End bell protectors These Carbon Fiber motor guards wrap around the motor and are not a bolt on style. There is no material between the motor and the motor plate. They have a smooth surface to slide across rocks better. They are a tight fit so they do not spin or slide around on the motor during use. Servo tape is not required unless you have a machined motor can. These fit Berg, Xr-10, bully 2, and super. $35.00 Shipped U.S.P.S Mail Paypal:Barrybelvedere@aol.com International shipping available, buyer pays extra for shipping contact barrybelvedere by private message on RCC or You will get a response sooner thru E-mail Barrybelvedere@aol.com. All questions will be answered as soon as possible. Last edited by barrybelvedere; 08-15-2016 at 04:04 PM. |
Sponsored Links | |
04-26-2015, 11:02 PM | #2 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: MOA Carbon Fiber Motor guards!!!!!
My first batch was 11 pairs...5 pairs left as of right now! Ready to ship!
Last edited by barrybelvedere; 04-27-2015 at 02:09 AM. |
04-27-2015, 07:14 PM | #3 |
RCC Addict Join Date: Apr 2009 Location: Behind the wheel
Posts: 1,107
| Re: MOA Carbon Fiber Motor guards!!!!!
Sweet! Glad to see these up for sale!
|
04-30-2015, 09:18 AM | #4 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: MOA Carbon Fiber Motor guards!!!!!
4 pairs left
|
04-30-2015, 10:06 AM | #5 |
I wanna be Dave Join Date: May 2010 Location: Stowe
Posts: 3,987
| Re: MOA Carbon Fiber Motor guards!!!!!
Getting ready to place an order. Thanks for being a sponsor for the Northeast National Championship. |
05-01-2015, 09:10 PM | #6 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: MOA Carbon Fiber Motor guards!!!!!
Yes sir.... Mr. slick! I will be there AND I will have lots of carbon goodies made just for your event. I will have MOA motor guards, scx-10 4 link/servo mounts for front or rear steer, MRC 4 link/servo/batt plate for the front axle, MRC 4 link plate for the rear, Ax-10 rear 4 link plates, And a New Vertical plate MOA Chassis that weighs 60 grams that i will be using at 2015 ECC!
|
05-04-2015, 01:59 PM | #7 |
RCC Addict Join Date: Mar 2011 Location: Way out there!
Posts: 1,465
| Re: MOA Carbon Fiber Motor guards!!!!!
I want to see that new chassis. Where is the build thread?
|
05-04-2015, 02:36 PM | #8 |
Rock Crawler Join Date: May 2007 Location: Norwich
Posts: 920
| Re: MOA Carbon Fiber Motor guards!!!!! |
05-05-2015, 01:52 AM | #9 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: MOA Carbon Fiber Motor guards!!!!!
I will have 3 of the new chassis at ECC. Possibly one in action.
|
05-06-2015, 12:46 PM | #10 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: MOA Carbon Fiber Motor guards!!!!!
3 pairs left.... A set sold on eBay last night.
|
05-08-2015, 01:38 PM | #11 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: MOA Carbon Fiber Motor guards!!!!!
10 more pairs motor guards made.
|
05-10-2015, 07:10 AM | #12 |
Rock Crawler Join Date: May 2007 Location: Norwich
Posts: 920
| Re: MOA Carbon Fiber Motor guards!!!!!
Are these available for 500's ?
|
05-13-2015, 12:17 AM | #13 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: MOA Carbon Fiber Motor guards!!!!!
I will know this weekend when I get my hands on a 500 for measurements.
|
05-15-2015, 06:57 AM | #14 |
I wanna be Dave Join Date: May 2007 Location: Taylors Falls just hanging with the MNRCRC crew.
Posts: 7,843
| Re: MOA Carbon Fiber Motor guards!!!!! |
05-15-2015, 07:43 AM | #15 |
Rock Stacker Join Date: Apr 2014 Location: Hobart
Posts: 74
| Re: MOA Carbon Fiber Motor guards!!!!!
I bought a set of these off Ebay A few days ago. Didn't realise you were selling on here as well. Looking forward to seeing how these hold up Vs the BWD ones. |
05-17-2015, 11:22 PM | #16 |
RCC Addict Join Date: Apr 2009 Location: Behind the wheel
Posts: 1,107
| Re: MOA Carbon Fiber Motor guards!!!!!
The new chassis won 3rd place at ECC this weekend. First time out. Good job Barry! There will be a build thread coming soon to a berg tech section near you. Last edited by Beest; 05-17-2015 at 11:24 PM. |
05-22-2015, 10:40 AM | #17 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: MOA Carbon Fiber Motor guards!!!!!
After giving away some Motor guards and other carbon parts at ECC...As of right now there are 8 pairs of carbon guards left.
|
05-22-2015, 11:23 AM | #18 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: MOA Carbon Fiber Motor guards!!!!!
At ECC Troy and I came to the conclusion that the guards that are already being made will fit the 400'S & 500's if an extra cut is added with a Dremel and cutting wheel so that it will grip around the can tighter. If you would like to order these Motor guards for the 500's or 400's let me know when you place your order if you need me to add the extra cut.
|
05-26-2015, 10:37 AM | #19 |
Rock Crawler Join Date: Aug 2011 Location: Perth west oz
Posts: 944
| Re: MOA Carbon Fiber Motor guards!!!!!
I am just wondering, does CF conduct electricity? Will it short the motor terminal? $25 is for a pair or each? |
05-26-2015, 11:23 AM | #20 |
I wanna be Dave Join Date: Jan 2004 Location: Detroit
Posts: 3,583
| Re: MOA Carbon Fiber Motor guards!!!!!
Just sent Paypal.
|
MOA Carbon Fiber Motor guards!!!!! - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DLUX Carbon Fiber MOA axles | Erik D_lux | Axles, Trannys, T-case | 86 | 10-28-2016 07:39 AM |
CreationFab RD1 Carbon Fiber Bodiless MOA Chassis! | Chris_The_Battery_Man | EnRoute Berg | 2 | 07-14-2012 07:53 PM |
CreationFab RD1 Carbon Fiber Bodiless MOA Chassis! | Chris_The_Battery_Man | Axial XR10 | 22 | 07-14-2012 10:57 AM |
Thread Tools | |
Display Modes | |
| |