CustomFiber... Motor guard's
 

What's up, I'm Troy.. I'm in my 3rd year of vendorship, which all started with these beauty's right here! CustomFiber, Original, motor guard's!!!
http://images.tapatalk-cdn.com/15/07...57c2584199.jpg

Of course, they have been changed and updated, from my original ways of cutting..

Now I specialize in custom motors, as where when I started, it was just for 540 cans..

Over the years, I have cut many of guard's and listened to the customer's.
Now I own every motor size, on the market.

For HH 400 and 500, brood nexus and stubbies, and of course, all 540 cans.. There isn't a better looking or lighter CF motor guard out there! ;)

Some 500's from ZZR 1100 racer
http://images.tapatalk-cdn.com/15/07...4e2e144e7a.jpg
http://images.tapatalk-cdn.com/15/07...5604f6a138.jpg
http://images.tapatalk-cdn.com/15/07...3345108648.jpg

Each set or single, guard is cut per customer and type of axle, you use.

Here's some 400's from Softy
http://images.tapatalk-cdn.com/15/07...c2b7bd5669.jpg
http://images.tapatalk-cdn.com/15/07...ed78a2f8cc.jpg

Some nexus from Zarizi Tech
http://images.tapatalk-cdn.com/15/07...056b4d924a.jpg
You can show off your 400, 500, Nexus or whatever
http://images.tapatalk-cdn.com/15/07...b72e15c7b0.jpg
Samu actually runs these on his sporty, pro, and super..

Here's my Berg (the servo guard of mine as well.. Any under servo or to servo)
http://images.tapatalk-cdn.com/15/07...9d7eb4963d.jpg

Here on the right, is for a sporty.. (Battery tray on bottom left)
http://images.tapatalk-cdn.com/15/07...119d47853e.jpg

Motor guard's are 15$ a piece or 26$ for 2.. Add 5$ for specialty motors(for a pair).. 400, 500, nexus.. (It's extra time in cutting)

Servo guard's are 10$(under servo) and 12$(top servo w/a hole for the horn)

Battery trays.. 8$

Re: CustomFiber... Motor guard's
 

do you have another pic of just the battery mount?

Re: CustomFiber... Motor guard's
 

Wish I haven't had to wait 2 years for a red CF servo guard that I already paid for and have not recieved.

Re: CustomFiber... Motor guard's
 

Your are 100% right sir! PM coming for refund and shipping info..

Re: CustomFiber... Motor guard's
 

http://images.tapatalk-cdn.com/15/07...2dee4c3f89.jpg

If you have a XR, it would be on the driver side.. (Which I'll have to dig a picture up of..)

http://images.tapatalk-cdn.com/15/07...0999d033ab.jpg

Re: CustomFiber... Motor guard's
 

it would be for berg v1 and for dlux superlights ... how do they mount to the axle and what is your paypal address? looking to buy 3.

Re: CustomFiber... Motor guard's
 

Stock pile updated!

400, 500, and 540's..

Last step ready to be done, upon mention of axle and motor type..

These aren't a one guard fits all.. They are custom made per motor style and axle choice.

http://images.tapatalk-cdn.com/15/07...6b44640fbc.jpg

Re: CustomFiber... Motor guard's
 

you must not be very interested in selling this stuff? i asked for your paypal info and wanted to order 3 of the battery mounts that you have listed here for $8. but after being ignored, reading other peoples responses, and sending you pm's that you ignore, i must say that your customer service leaves a lot to be desired.

Re: CustomFiber... Motor guard's
 

You didn't get a PM?

Oh well if not.. Some members have to realize that vendor's have full time jobs, work 14hr days, drive 2hrs each way, have family's to take care of, and do this for fun and on the side..

Getting covered in CF at 10-11pm at night, isn't fun.. So I contact and cut when I have a few orders.
If I get into it, I cut extras..

I will be happy to make you the battery trays, when I cut the motor guard's and servo guard's, that I have to get finalized. (As everything is hand cut and custom, per type of axle you run)
I'll contact you when they are cut.

As for hateful boy, that's been a long on going thing.
I got busy at work and life. I'm Trying to make it right.

Re: CustomFiber... Motor guard's
 

sorry but i did not get a pm. and trust me im in the same boat as you and have a baby on the way:). but when i saw you completely skip over my, pm, and post i took it like i was being ignored so i am sorry if i was wrong. i buy a lot of my crawler stuff if not all of it from rcc vendors and i do understand that this is not everyones 1st priority and i thank you for even taking the time to make parts for us berg guys. i will wait for your pm.
but please could you answer how they mount to the axle because if it requires me drilling into the case or tube i may not want to get them.
TIA.

Re: CustomFiber... Motor guard's
 

My apologies.. I should of handled that better. I will try not to let the heat of the day get to me.

I care very much, to the point of looking for a new job, that doesn't demand so much of my time from family and RC.

I'll get you a PM shot over and get you taken care of.

They are made to custom fit reach set of axles..
It will mount into a preexisting bolt thru the case and the shock/link mount.. [emoji106]

I'll cut one and get a pic posted of it mounted to my superlites. :)

Re: CustomFiber... Motor guard's
 

no need for pics. as long as i dont have to drill its fine.
i apologize for misunderstanding the complexity of the situation and coming off the way i did. ive been into rc for over 20yrs, but i still consider myself a newb when it comes to rcc and im not completely schooled in the politics here. :oops:

Re: CustomFiber... Motor guard's
 

ZZR 1100 Racer
http://images.tapatalk-cdn.com/15/08...9af981fd42.jpg
Brandon
http://images.tapatalk-cdn.com/15/08...fa2384e529.jpg
Crawlerwon (minus battery trays)
http://images.tapatalk-cdn.com/15/08...54e5a35e26.jpg
Heavy2008
http://images.tapatalk-cdn.com/15/08...1c0dab0b3f.jpg

Re: CustomFiber... Motor guard's
 

Cough.. Cough..:mrgreen:

Re: CustomFiber... Motor guard's
 

You better get that checked out bro! It doesn't sound good.. :flipoff:

Re: CustomFiber... Motor guard's
 

I did.. The cure is custom fiber.. Lots of it:flipoff:

Re: CustomFiber... Motor guard's
 

And Lots you shall have! Specially to protect all that wonderful HH you just got.. ;)
http://images.tapatalk-cdn.com/15/08...a7ba822b31.jpg

You, like me, don't just get HH for the Awesome Powah! We are also after the Awesome size of the 400 an 500's...

Now, what would be the point in buying this motors of Awesomeness, if we had to Bulk them up to protect them!?
Here's a couple pic's showing how the 400, 500, and other small diameter motors get protected and keep there small, sleek diameter...

Can't even see it!
http://images.tapatalk-cdn.com/15/08...5282949927.jpg
Let's shine a little light on it..
http://images.tapatalk-cdn.com/15/08...a64d7b3768.jpg
Yeah, they are that perfect! ;)

The cut out not only allows for a snug fit, but what's left hugs the endbell and the motor plate. Not to mention, it shows off those sexy cans! :)
http://images.tapatalk-cdn.com/15/08...0c2276d500.jpg
http://images.tapatalk-cdn.com/15/08...ae40187637.jpg
http://images.tapatalk-cdn.com/15/08...cad4fcaa67.jpg

Re: CustomFiber... Motor guard's
 

I love the parts i ordered and they saved and slided great at worlds!

Re: CustomFiber... Motor guard's
 

How does the battery tray mount on Xr axles??

Re: CustomFiber... Motor guard's
 

With the screw to your front driver side shock.