Go Back   RCCrawler Forums > Vendors > Vendors Market > Axles, Trannys, T-case
Loading

Notices

Thread: Sloski's CVD's for berg's

Reply
 
LinkBack Thread Tools Display Modes
Old 12-07-2015, 11:33 AM   #1
I wanna be Dave
 
Join Date: Aug 2008
Location: Deep in Swing Town
Posts: 2,977
Default Sloski's CVD's for berg's

Introducing the Sloski800’s CVD’s for Berg……………

This is a joint venture with a good friend……..


"We have specifically engineered the Sloski800’s CVD's from heat treated high strength 4340 Chromoly steel to ensure our CVD's are built for Stress and longevity, and a steering angle of 50 degrees!"

Made in the USA in a nearly 9000 square foot state-of-the art Precision Swiss-style CNC machining facility. Our CVD's follow the ISO-9001-2000 quality standards meeting high tolerances and demands.
With the construction of your crawler it is crucial to design your rig around utilizing this 50* of steering. For those setups potentially allowing more throw then our recommended amount a steering stop is suggested to stop the steering knuckle from rotating pass said measurement. Over steering and binding can occur past the designed amount causing negative effects to both your rig and your CVD.

Proper maintenance of the CVD is crucial in ensuring a long life. This includes but is not limited to occasional cleaning and lubrication as well as the steering stops noted above. Because we cannot control the outcome and usage of our product once it is installed, our CVD's do not hold a warranty.

These will fit:
VP 8deg. Knuckles and C’s
Axial high steer knuckles with stock tubes
Axial non 8deg.


We NOW Have another Option



Thank you

any questions please PM and ask


These are all put together and packaged by me, you will need to take them apart and lube them with your choice of lube befor you install them......



Cost: $125.00 + $6.75 shipping to the 50 US states only
that's for first class shipping and Insurance
any where else please PM me

Paypal only
PM me for Paypal account


THANK YOU

Last edited by roksloski; 09-20-2016 at 09:20 AM.
roksloski is offline   Reply With Quote
Sponsored Links
Old 12-08-2015, 08:21 AM   #2
Newbie
 
Join Date: Nov 2013
Location: Australia
Posts: 4
Default Re: Sloski's CVD's for berg's

hello mate, how long will these be in production or available in the coming times? also is there any reviews etc out one these ?

cheers
woody91 is offline   Reply With Quote
Old 12-13-2015, 09:55 AM   #3
I wanna be Dave
 
Join Date: Aug 2008
Location: Deep in Swing Town
Posts: 2,977
Default Re: Sloski's CVD's for berg's

Quote:
Originally Posted by woody91 View Post
hello mate, how long will these be in production or available in the coming times? also is there any reviews etc out one these ?

cheers
its a limited run, dont wait too long.......
roksloski is offline   Reply With Quote
Old 12-17-2015, 11:54 AM   #4
RCC Addict
 
cabron's Avatar
 
Join Date: May 2011
Location: at home
Posts: 1,099
Default Re: Sloski's CVD's for berg's

these will fit the stock berg lockers as well as the stock berg tubes/c-hubs and stock berg knuckles?

thanks
cabron is offline   Reply With Quote
Old 12-18-2015, 06:06 PM   #5
Rock Crawler
 
Join Date: Apr 2009
Location: Sonoma County
Posts: 677
Default Re: Sloski's CVD's for berg's

Quote:
Originally Posted by cabron View Post
these will fit the stock berg lockers as well as the stock berg tubes/c-hubs and stock berg knuckles?

thanks
These will fit:
VP 8deg. Knuckles and C’s
Axial high steer knuckles with stock tubes
Axial non 8deg

From above post!

Last edited by PEE WEE; 12-18-2015 at 06:08 PM.
PEE WEE is offline   Reply With Quote
Old 12-18-2015, 08:17 PM   #6
RCC Addict
 
cabron's Avatar
 
Join Date: May 2011
Location: at home
Posts: 1,099
Default Re: Sloski's CVD's for berg's

I can read pee wee but it does not address my question.
why are they called cvds for berg if they fit axials?

I ask again will they fit stock berg tubes, lockers, c-hubs, knuckles?

Last edited by cabron; 12-18-2015 at 08:20 PM.
cabron is offline   Reply With Quote
Old 12-18-2015, 08:31 PM   #7
I wanna be Dave
 
Join Date: Dec 2006
Location: here
Posts: 2,941
Default Re: Sloski's CVD's for berg's

My guess is no they won't work with stock berg knuckles, Axial knuckles only. Stock berg tubes and lockers yes.
There's a difference between berg & axial knuckles so if he's saying they work with axial knuckles then they won't work with berg knuckles.

Last edited by tapped-out; 12-18-2015 at 08:36 PM.
tapped-out is offline   Reply With Quote
Old 12-20-2015, 08:58 AM   #8
I wanna be Dave
 
Join Date: Aug 2008
Location: Deep in Swing Town
Posts: 2,977
Default Re: Sloski's CVD's for berg's

Quote:
Originally Posted by cabron View Post
these will fit the stock berg lockers as well as the stock berg tubes/c-hubs and stock berg knuckles?

thanks
They will not work with the stock berg knuckles

If you have stock berg tubes with the built on C, you will need an axial based knuckle, a zero Ackerman high steer knuckle, or a std knuckle...
If you have a tube that takes a C hub, then you will need an axial style C and knuckles, weather it be 8 deg or std. High steer, or 0 Ackerman




And yes they will work with the stock lockers............ thats what i run. !

Thank you
Questions you can pm me

Last edited by roksloski; 12-20-2015 at 09:14 AM.
roksloski is offline   Reply With Quote
Old 04-17-2016, 06:53 AM   #9
I wanna be Dave
 
Join Date: Aug 2008
Location: Deep in Swing Town
Posts: 2,977
Default Re: Sloski's CVD's for berg's

Dont forget about these great cvd`s.....
roksloski is offline   Reply With Quote
Old 06-02-2016, 10:35 PM   #10
I wanna be Dave
 
Join Date: Aug 2008
Location: Deep in Swing Town
Posts: 2,977
Default Re: Sloski's CVD's for berg's

These are back in stock at RCbro's........

and Yes i have them also.........
roksloski is offline   Reply With Quote
Old 10-08-2017, 07:15 PM   #11
i-5
Newbie
 
Join Date: May 2011
Location: Tokyo, Japan
Posts: 21
Default Re: Sloski's CVD's for berg's

Will this fit rcbros alum tube without grinding?

How about rcbros locker?
i-5 is offline   Reply With Quote
Old 11-04-2017, 05:59 PM   #12
RcBros Hobbies
 
RcBro's Avatar
 
Join Date: Nov 2005
Location: Oregon
Posts: 4,687
Default Re: Sloski's CVD's for berg's

Quote:
Originally Posted by i-5 View Post
Will this fit rcbros alum tube without grinding?

How about rcbros locker?
Fits in both.
RcBro is offline   Reply With Quote
Reply



Sloski's CVD's for berg's - Similar Threads
Thread Thread Starter Forum Replies Last Post
Sloski's simple berg build roksloski EnRoute Berg 293 03-08-2019 11:35 AM
Sloski's attempt at a scaler roksloski Axial SCX-10 96 07-13-2016 06:51 AM
CVD's for Berg's roksloski New Products and Great Deals 0 12-03-2015 10:31 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 02:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com