Modded VP knuckles. BIG BEARINGS Missed this one too! Remember when all axle housings only had 11mm bearings? What a pain! They constantly failed and frequently took the ring and pinion with them. I suppose you could say I am trying to lead the RC movement of making bearing bigger everywhere. Other manufactures took note after I did the bearing mods on the inner bearings for the housings, maybe this will push them to do it in the knuckles also? I am now selling Vanquish modded knuckles (standard Wraith and Scale versions) that use the Wraith/XR stub shaft. They are modded to use the biggest bearings possible. 10x16 inner, 5x12 outer. Stock is 10x15 inner, 5x11 outer. This may not seem like a huge difference but trust me, it is. These are only going to be stocked in the "raw" finish. I can do colors but when I put them in my jig, they can get scratched really easy so I want to avoid them if possible. If you do want a specific color, cant wait for me to get them and dont mind some scratches, let me know and I can get it done. I am putting these on my site now at Dlux Fab I should be able to start shipping on Monday. http://www.rccrawler.com/forum/attac...211_110359.jpg |
Re: Modded VP knuckles. BIG BEARINGS sent a pm but maybe you are overloaded. would it be possible to send my current ones to ya to get hogged out? |
Re: Modded VP knuckles. BIG BEARINGS Quote:
I already asked. |
Re: Modded VP knuckles. BIG BEARINGS Quote:
Sorry, it does not work out to have people send in their knuckles. Good luck. |
Re: Modded VP knuckles. BIG BEARINGS Quote:
|
Re: Modded VP knuckles. BIG BEARINGS Edit - ignore, posted in other thread. |
All times are GMT -6. The time now is 11:45 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com