Post pics of your 2.2 Comp rigs and specs! Post up your rig and specs. CA needs to represent 8) If you dont have any pics of your rig but have attended comp recently check here: http://www.nor-calrcrc.com/gallery/v...mName=Crawling Keep the chit chat to a minimum and I will talk badger into making this a sticky "thumbsup" Specs: My 2.2 Blackjack Sincity/RCP blackjack chassis Tlt axles Axial tranny 55t lathe 3s lipo 5995 hitec servo Axial beadlocks with TCS :flipoff: rings Worn out Losi claws Top secret anti dig setup :lol: http://www.nor-calrcrc.com/albums/wi...mp2_07/ala.jpg |
Heres my cheapo Jeep. Specs are: SW2 chassis bone stock tlt axles pede trans 55 turn lathe motor TQ3 tx/rx LRP waterproof esc (has 3 second reverse delay :roll:) worn Masher 2000's HPI Jeep body 645mg servo and stock tlt shocks :flipoff: Yeah its a piece of crap but somehow i still do pretty good. http://i128.photobucket.com/albums/p...0/IMG_2219.jpg http://i128.photobucket.com/albums/p..._100/Jeep8.jpg |
2 Attachment(s) 2.2 Comp rig: Custom chassis ax10 axles ax10 tranny rooster crawler 55t hitec 5995 claws droop front/ sprung rear Attachment 53059 Attachment 53061 |
3 Attachment(s) Project TINY 3/16 DOM tubing Panhard 3 link front and rear suspension TLT axles (one slightly modified) Losi XXX trans 55T motor Rock Crushers / Mayhem Engineering beadlocks for rock racing Rock Claws / RC4wd beadlocks for crawling competitions HS5955 servo (squels like a mother, but turns the wheels) |
"Sancho" 4 Attachment(s) SinCity's Black Jack chassis tlt axles Novak's 55t lathe Novak's Rooster Crawler ESC Hitec 645 servo Spektrum createacrawler's "Sinners" bead locks Losi Rock Claws 3Racing mini LST shocks |
Ive been reading on RCCRAWLER for Quite a while, and finnally decided to build one. So here it is, my first crawler. SW3 Chassis Axial Axles Losi XXX T SHOCKS 60 wt oil in each R2D with DIG Crawlmaster Sport Mamba Max Novak BEC RC4WD Wheels 3oz of lead in each front wheel 1.5 oz lead in each rear wheel Kreepy Krawler Red Wide in front, Pink Wide in Rear Losi Rock Claws ACE 1313 Steering Servo Airtronics Rock Crusher for Dig http://img.villagephotos.com/p/2003-...4/DSC00892.JPG http://img.villagephotos.com/p/2003-...4/DSC00889.JPG http://img.villagephotos.com/p/2003-...4/DSC00907.JPG http://img.villagephotos.com/p/2003-...4/DSC00912.JPG |
4 Attachment(s) Mine - yellow bug: P4 Chassis Tlt axles R2D trans w/Hitec 5645 for dig Axiom 55t motor Mamba Max JR 8711 servo CC BEC 8 cell Elite 1500's DJ's (my 12year old son) - red bug: Modified AX-10 chassis GPM 110mm shocks AX-10 axles R2D trans Integy V10 handwound 50T Mamba Max Hitec 5955 servo - steering Hitec 85mg servo - dig CC-BEC 6 cell elite 1500's |
Mine is always undergoing revision of some sort, considering it's COMPLETELY custom. The only non-modified stock parts are plastic diff cases, rear R&P, and rear link/shock mounts. -narrowed WK axles (by about 1.3") -front CVDs -RC4WD rear steer lockout adapter -MSD Top Gun beadlocks (the reason why I narrowed the axles) -Masher 2000s -KMS 2826/6 730kv outrunner -direct drive, geared 6/64 -Mamba 25 ESC -custom chassis -Traxxas Big Bore shocks with XTM X-Cellerator throttle return springs as internal springs -custom BTA steering -Hitec 5955TG -cheap 6v 3amp UBEC (works well enough) -3s 2100mah Lipo -Nomadio React radio -T/E-Maxx driveshafts -all custom links, rears are obviously bent (looking to remount the front shocks and make some bent front links as well) Needs a more low profile body than the HPI Bronco it's currently running. http://img.photobucket.com/albums/v1...4/IMG_6905.jpg http://img.photobucket.com/albums/v1...4/IMG_6910.jpg And the body that's currently on it (but an older pic): http://img.photobucket.com/albums/v1...4/IMG_6695.jpg |
slickrock mafia comp rigs................. 2 Attachment(s) custom tube chassis r2d trans tlt axles all alum upgrades losi rock claws rc4wd beadlocks rooster crawler 65t scorpion r2d trans rooster crawler rc4wd beadlocks alum upgrades rockstar body |
Raptor2 2.2 Here is my narrowed Raptor2 torsion chassic rig. I am running 55 turn motors with 6 tooth pinions. Mamba Max and an 11.1 volt lipo with Castle BEC. The radio is an Airtronics MX3. Let me know what you think. |
STUFF: Axial axles Axial tranny Rcp staright axle adapters Rcp straight axles Integy 55t Mamba Max esc Airtronics tx & rx custom chassis & links Hitec 5995 servo Xtm shocks Rpm wheels Losi claws & grappler body http://i49.photobucket.com/albums/f2...y/S7300014.jpg |
SW3 chassis AX10 axles R2D 7t Cobalt 3C Lipo DX3R BL02N Losi Claws Mamba max and CCBEC 645 and 5595 TCS aluminum 4-link plates Aluminun Cs, knuckles, and lock outs Losi XXX shocks http://i165.photobucket.com/albums/u...z/DSC00918.jpg |
Reign J2-tt Chassis TLT axles Old school Moab tires w/ RC4wd beadlocks R2D trans 35t Integy motor Novak Crawler ESC Hitec receiver Hitec servos http://i127.photobucket.com/albums/p...rch2008001.jpg http://i127.photobucket.com/albums/p...rch2008005.jpg |
Blackjack Chassis TLT Axles- RCP & RC4WD R&P's MSD C's & Lockouts RC4WD Straight Axle RCP CVD's R2D trans Pede Shafts w/metal yokes HPI Shocks Mayhen DP's Losi Claws w/red Kreepy's HH Crawlmaster Mamba 25 TQ3 (DX3R coming soon) 2100 3s Lipo Htec 5955 Custom Links RockstarBody http://sn4wd.com/~joel/blackjack/slides/IMG_3435.JPG http://sn4wd.com/~joel/blackjack/slides/IMG_3421.JPG |
Here is my 2.2 Comp Rig It's basically a stock RTR Axial with: Homemade Link Plates High Clearance Lower Links Integy 45 Turn Lathe Motor 8 Cell Saddle Pack 1500 Mounted On Axle With Homemade Battery Plates Homemade Aluminum Tie Rod Axial Super Soft Springs Up Front Losi Rock Claws Two 1/8'' Holes Drilled In All 4 Rims 8 Star Cut Axial Foams Up Front No Foams Out Back Pro-Line '80 Chevy K10 Body http://i31.photobucket.com/albums/c3...0955resize.jpg |
Custom built Tuber Here is my own design Tuber 3/16 tube AX-10 Trans 55t lathe motor Tekin FX-R 3S lipo Poulson Axles Hi Tec 5955ts |
McCrawlin that me 4 Attachment(s) specs VF Sling Shot chassis with links Revo shocks with yellow springs Axial Axles Axial Tranny with VF dig Integy 55t lathe motor Mayhem Spiders with Panther Tires custom hybrids in the rear and 1 1/2 panther foam up front TCS Four link front and rear RCP c hubs, knuckles, straight axle Hitec HS 5985MG steering this rig apogee 2200mah lipo CENTRAL VALLEY ROCK CRAWLER BABY |
Scorpion Losi Crawler Shocks Lose Crawler tires Rooster Motor and Speed Control RC Solution Roll Cage stock links (aluminum ones this month) http://i161.photobucket.com/albums/t...cture002-1.jpg |
Axial Scorpion kit -ckc crawlers stage 2 kit -Bent links front and rear -losi rock claws(added after pic) -upgraded drive shafts and yolks -integy axle spacers -lots of mods http://i536.photobucket.com/albums/f...d/DSCN2390.jpg http://i536.photobucket.com/albums/f...4_edited-1.jpg |
CDW 2.2 comp chassis Novak "Rooster Crawler" esc Novak 55t motor Spektrum DX3 Stealth B-4 w/ Taylors hobby locker CAC "Sinners" w/ Losi "Rock Claws" |
5 Attachment(s) ^^^^^^^^^ EZY RYDER's pictures^^^^^^^^^^^ |
Link to my trucks http://www.rccrawler.com/forum/showt...=1#post1336931 |
|
well here is a few pics of mine http://i217.photobucket.com/albums/c...y/ax10cj52.jpg http://i217.photobucket.com/albums/c...oy/ax10cj5.jpg nothing too special rooster esc 65turn 4 linked rc4wd rims Rubicon tires rc4wd punsher shafts |
my back up rig- akrcc test chassis axial axles/trany/front shox jr tx/rx/8711servo upgraded metal trany gears hr-spur novak rcrawler w/ 55t integy drives smc bent links all around integy rims/puttytats/pl-body trax-upper links rc4wd rear lockouts/front c hubs/ knuckles/rear shox 2=1000mah 2s lipo parl. everything mounted on the front-esc,servo,lipox2 http://i11.photobucket.com/albums/a1...n/SDC10082.jpg |
ax-10 rig blackjack chassis novak goat 6 cell axle packs pro-line m3 hammers http://i270.photobucket.com/albums/j...g?t=1227403214 |
Wheely King Conversion @ Crane Creek Here are a couple of pictures of my Wheely King Crawler up at Crane Creek regional park(my favorite place to crawl). This is an awesome place to crawl - roughly 1/2 mile of rocky creek bed with just the right sized rocks for crawling and only five minutes from my house! Unfortunately it will all be under rushing water soon. Here is the current setup of my WK: 96 tooth Spur 12 tooth Pinion 55 turn Novak Motor HPI Cralwer Conversion Chassis reversed Losi mini crawler speed control 50/50 suspension(1.5 inch springs inside) Stock tires and wheels 5oz Weight on each front wheel Axle mount Servo plate HPI Jeep Rubicon Body http://lh3.ggpht.com/_DF6xcEbRZdU/SU...0/IMG_0895.JPG http://lh3.ggpht.com/_DF6xcEbRZdU/SU...0/IMG_0899.JPG http://lh4.ggpht.com/_DF6xcEbRZdU/SU..._0887_crop.jpg |
here my scale ax10 <a href="http://s548.photobucket.com/albums/i...t=DSC00015.jpg" target="_blank"><img src="http://i548.photobucket.com/albums/i...s/DSC00015.jpg" border="0" alt="Photobucket"></a> |
My AX10 ARTR RIG Axail AX10 Crawler Changes Made: Mods: Added stick on weights to F/R wheels. Counter Sunk Screws on the front side of the front axle to get more steering. Added ¼ inch of fuel tubing inside of shocks to lower ride height to 2 7/8 inches. Flipped the transmission around. Moved the body as low as posible Removed stock battery tray. Upgrades: Losi Rock Claw tires. MIP C Spline Drive Shafts MIP CVD front axles. Axail Soft Springs in front. Black 30 degree lower bent links F/R EEM Dual Reverse Triangulation Delrin Skid TCS Delrin 4 Link Plates F/R. TCS Delrin saddle pack axle battery mounts. TCS upper link plates F/R. Screws replaced with hex screws. Electronics: Castle Creations Mamba Max ESC Cheap Battery Packs 1500mah NiMh 6 cell saddle Pack Battery Mounted on the front Axle Integy 55t motor Still to come are a dig and a new body. A Castle Creations BEC And will be going to 8 cell saddle packs for a little more get up and go when it is needed. Then http://i303.photobucket.com/albums/n...0724Medium.jpg http://i303.photobucket.com/albums/n...0726Medium.jpg http://i303.photobucket.com/albums/n...0691Medium.jpg Now http://i303.photobucket.com/albums/n...90540Small.jpg |
Started out as a bone stock AX-10 with an ok Hightech radio. Goat Brushless system and big 3400mah sub c pack.... It sucked so I had to build one. http://i435.photobucket.com/albums/q...Picture138.jpg http://i435.photobucket.com/albums/q...Picture178.jpg http://i435.photobucket.com/albums/q...Picture186.jpg http://i435.photobucket.com/albums/q...Picture191.jpg Now I built my self a Tube Chassis Goat brushless w/ 2700 kv motor 14t pinion/87 spur 2/3a 7 cell saddle packs Losi Claws DNA dig w/645mg Servo for dig Hightech 7955TG Coreless Steering servo Castle BEC at 6.4 volts Spektrum DX3R Radio Customer Built upper four link plates MIP front CV Drive Shaft STNC Knuckes/Inner C's and Skid RC 4WD rear Lock outs Uppgraded Spools in diffs had Integy Shocks but they would not stop leaking went back to stock springs with a little special tuning.... http://i435.photobucket.com/albums/q...Picture443.jpg http://i435.photobucket.com/albums/q...Picture444.jpg Did not have my 2/3 a Packs Made yet. Did my first comp with the Integy's and the big sub c's this is what it looks like now http://i435.photobucket.com/albums/q...Picture493.jpg http://i435.photobucket.com/albums/q...Picture572.jpg http://i435.photobucket.com/albums/q...d/DSCF2760.jpg http://i435.photobucket.com/albums/q...Picture549.jpg |
|
here is mine -BLACK WIDOW CHASSIS -MAYHEM WHEELS -ROVERS -DNA DIG -DX3 -CC BEC -CC SIDEWINDER -INTEGY V11 PRO 65T -1320 3 CELL LIPO -INTEGY SHOCKS WITH 70WT OIL -JR 8711 STEEREING -HITEC 225 MG DIG -9 OZ IN FRONT (EACH) -3 OZ IN REAR (EACH) -ALLUMINUM C AND HIGH STEER KNUCKLES -STRAIGHT AXLE AND ALLUMINUM LOCKOUTS -MY OWN CUSTOM LINKS http://i32.photobucket.com/albums/d1...ertoncomp2.jpg http://i32.photobucket.com/albums/d1...lertoncomp.jpg |
http://http://i59.photobucket.com/al.../rcshit026.jpghttp://http://i59.photobucket.com/al.../rcshit018.jpghttp://http://i59.photobucket.com/al...loseups004.jpgmy lompoc crawler HOW DO I POST PICS???????? |
ax10 stage 2 ax10 kit, CKRC stage II kit Novak brushed rooster crawler motor/esc set HPI jeep body Traxxas EMaxx steering servo CKRC front batt/servo plate 15oz weight in front wheels, none in back Traxxas controller/reciever http://i724.photobucket.com/albums/w...0/IMG_5084.jpg http://i724.photobucket.com/albums/w...0/IMG_5080.jpg http://i724.photobucket.com/albums/w...0/IMG_5082.jpg |
3 Attachment(s) Heres mine AX10 SWX Chassis Bender 4 link plate tekin fxr/55t combo ckrc bta steering mayhem DP beadlockers rovers losi 4' shocks |
1 Attachment(s) burg axles ckrc lockouts, also BTAS elctro disco hitec 7955 and micro hs65 ProComp DH 2.2 vanquish filthy larry 6 shooters tcs chassis novak rooster twin 55's DX3R integy slum shocks panthers, even when i tear them, more panthers http://picasaweb.google.com/lh/photo...eat=directlink |
|
|
Here is my comp rig. Novak Rooster Matrix 65T Stage 3 Racing Trans/Dig Panthers W/ 5.5 Foam Hitec TG ProLine RockStar body http://i47.photobucket.com/albums/f1...5/DSC00706.jpg http://i47.photobucket.com/albums/f1...5/DSC00709.jpg And here are my play toys. http://i47.photobucket.com/albums/f1...5/DSC00722.jpg http://i47.photobucket.com/albums/f1...5/DSC00717.jpg |
All times are GMT -6. The time now is 05:50 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com