|
| LinkBack | Thread Tools | Display Modes |
01-11-2008, 10:46 AM | #1 |
Im Brandon Join Date: Feb 2005 Location: Colfax, CA
Posts: 8,156
| Post pics of your 2.2 Comp rigs and specs!
Post up your rig and specs. CA needs to represent If you dont have any pics of your rig but have attended comp recently check here: http://www.nor-calrcrc.com/gallery/v...mName=Crawling Keep the chit chat to a minimum and I will talk badger into making this a sticky Specs: My 2.2 Blackjack Sincity/RCP blackjack chassis Tlt axles Axial tranny 55t lathe 3s lipo 5995 hitec servo Axial beadlocks with TCS rings Worn out Losi claws Top secret anti dig setup |
Sponsored Links | |
01-11-2008, 11:59 AM | #2 |
RCC Addict Join Date: May 2006 Location: California
Posts: 1,361
|
Heres my cheapo Jeep. Specs are: SW2 chassis bone stock tlt axles pede trans 55 turn lathe motor TQ3 tx/rx LRP waterproof esc (has 3 second reverse delay ) worn Masher 2000's HPI Jeep body 645mg servo and stock tlt shocks Yeah its a piece of crap but somehow i still do pretty good. |
01-11-2008, 03:15 PM | #3 |
Quarry Creeper Join Date: Aug 2007 Location: Rocklin, CA
Posts: 476
|
2.2 Comp rig: Custom chassis ax10 axles ax10 tranny rooster crawler 55t hitec 5995 claws droop front/ sprung rear Last edited by derwood21; 01-11-2008 at 03:18 PM. |
01-11-2008, 10:34 PM | #4 |
RCC Addict Join Date: Apr 2004 Location: Santa Clara
Posts: 1,456
|
Project TINY 3/16 DOM tubing Panhard 3 link front and rear suspension TLT axles (one slightly modified) Losi XXX trans 55T motor Rock Crushers / Mayhem Engineering beadlocks for rock racing Rock Claws / RC4wd beadlocks for crawling competitions HS5955 servo (squels like a mother, but turns the wheels) |
01-11-2008, 11:30 PM | #5 |
RCC Addict Join Date: Jun 2006 Location: Sin City
Posts: 1,852
| "Sancho"
SinCity's Black Jack chassis tlt axles Novak's 55t lathe Novak's Rooster Crawler ESC Hitec 645 servo Spektrum createacrawler's "Sinners" bead locks Losi Rock Claws 3Racing mini LST shocks Last edited by drumbeater; 08-17-2008 at 03:59 PM. |
01-12-2008, 07:39 PM | #6 |
Newbie Join Date: Dec 2007 Location: Anaheim Hills
Posts: 32
|
Ive been reading on RCCRAWLER for Quite a while, and finnally decided to build one. So here it is, my first crawler. SW3 Chassis Axial Axles Losi XXX T SHOCKS 60 wt oil in each R2D with DIG Crawlmaster Sport Mamba Max Novak BEC RC4WD Wheels 3oz of lead in each front wheel 1.5 oz lead in each rear wheel Kreepy Krawler Red Wide in front, Pink Wide in Rear Losi Rock Claws ACE 1313 Steering Servo Airtronics Rock Crusher for Dig Last edited by patrick21x; 07-19-2008 at 12:47 PM. |
01-13-2008, 10:14 AM | #7 |
Nor-CalRCRC Join Date: Dec 2006 Location: Monterey Peninsula
Posts: 745
|
Mine - yellow bug: P4 Chassis Tlt axles R2D trans w/Hitec 5645 for dig Axiom 55t motor Mamba Max JR 8711 servo CC BEC 8 cell Elite 1500's DJ's (my 12year old son) - red bug: Modified AX-10 chassis GPM 110mm shocks AX-10 axles R2D trans Integy V10 handwound 50T Mamba Max Hitec 5955 servo - steering Hitec 85mg servo - dig CC-BEC 6 cell elite 1500's Last edited by montereycrawler; 02-26-2008 at 12:54 PM. |
02-11-2008, 10:33 PM | #8 |
Rock Stacker Join Date: May 2007 Location: SoCal
Posts: 78
|
Mine is always undergoing revision of some sort, considering it's COMPLETELY custom. The only non-modified stock parts are plastic diff cases, rear R&P, and rear link/shock mounts. -narrowed WK axles (by about 1.3") -front CVDs -RC4WD rear steer lockout adapter -MSD Top Gun beadlocks (the reason why I narrowed the axles) -Masher 2000s -KMS 2826/6 730kv outrunner -direct drive, geared 6/64 -Mamba 25 ESC -custom chassis -Traxxas Big Bore shocks with XTM X-Cellerator throttle return springs as internal springs -custom BTA steering -Hitec 5955TG -cheap 6v 3amp UBEC (works well enough) -3s 2100mah Lipo -Nomadio React radio -T/E-Maxx driveshafts -all custom links, rears are obviously bent (looking to remount the front shocks and make some bent front links as well) Needs a more low profile body than the HPI Bronco it's currently running. And the body that's currently on it (but an older pic): |
02-23-2008, 12:03 PM | #9 |
Rock Stacker Join Date: Nov 2007 Location: Crawlafornia
Posts: 89
| slickrock mafia comp rigs.................
custom tube chassis r2d trans tlt axles all alum upgrades losi rock claws rc4wd beadlocks rooster crawler 65t scorpion r2d trans rooster crawler rc4wd beadlocks alum upgrades rockstar body |
02-24-2008, 09:11 PM | #10 |
Quarry Creeper Join Date: May 2007 Location: NCVRCC
Posts: 346
| Raptor2 2.2
Here is my narrowed Raptor2 torsion chassic rig. I am running 55 turn motors with 6 tooth pinions. Mamba Max and an 11.1 volt lipo with Castle BEC. The radio is an Airtronics MX3. Let me know what you think.
Last edited by WKKILLER; 05-17-2008 at 11:29 AM. |
02-28-2008, 09:19 PM | #11 |
Quarry Creeper Join Date: Nov 2007 Location: Jamestown
Posts: 230
|
STUFF: Axial axles Axial tranny Rcp staright axle adapters Rcp straight axles Integy 55t Mamba Max esc Airtronics tx & rx custom chassis & links Hitec 5995 servo Xtm shocks Rpm wheels Losi claws & grappler body |
03-16-2008, 01:18 AM | #12 |
RCC Addict Join Date: Mar 2007 Location: Penngrove
Posts: 1,809
|
SW3 chassis AX10 axles R2D 7t Cobalt 3C Lipo DX3R BL02N Losi Claws Mamba max and CCBEC 645 and 5595 TCS aluminum 4-link plates Aluminun Cs, knuckles, and lock outs Losi XXX shocks |
03-17-2008, 09:17 PM | #13 |
Quarry Creeper Join Date: Jul 2006 Location: Las Cruces, NM
Posts: 412
|
Reign J2-tt Chassis TLT axles Old school Moab tires w/ RC4wd beadlocks R2D trans 35t Integy motor Novak Crawler ESC Hitec receiver Hitec servos |
03-28-2008, 01:07 PM | #14 |
Rock Crawler Join Date: Jan 2008 Location: P-TOWN
Posts: 748
|
Blackjack Chassis TLT Axles- RCP & RC4WD R&P's MSD C's & Lockouts RC4WD Straight Axle RCP CVD's R2D trans Pede Shafts w/metal yokes HPI Shocks Mayhen DP's Losi Claws w/red Kreepy's HH Crawlmaster Mamba 25 TQ3 (DX3R coming soon) 2100 3s Lipo Htec 5955 Custom Links RockstarBody Last edited by Stuck; 04-14-2008 at 12:02 AM. |
05-03-2008, 10:37 AM | #15 |
Rock Stacker Join Date: Mar 2008 Location: Santa Rosa, CA
Posts: 61
|
Here is my 2.2 Comp Rig It's basically a stock RTR Axial with: Homemade Link Plates High Clearance Lower Links Integy 45 Turn Lathe Motor 8 Cell Saddle Pack 1500 Mounted On Axle With Homemade Battery Plates Homemade Aluminum Tie Rod Axial Super Soft Springs Up Front Losi Rock Claws Two 1/8'' Holes Drilled In All 4 Rims 8 Star Cut Axial Foams Up Front No Foams Out Back Pro-Line '80 Chevy K10 Body |
06-10-2008, 11:07 PM | #16 |
Quarry Creeper Join Date: Apr 2008 Location: Garden Grove
Posts: 499
| Custom built Tuber
Here is my own design Tuber 3/16 tube AX-10 Trans 55t lathe motor Tekin FX-R 3S lipo Poulson Axles Hi Tec 5955ts Last edited by motorman1600; 07-20-2008 at 12:11 AM. |
06-30-2008, 09:06 AM | #17 |
Quarry Creeper Join Date: Feb 2008 Location: stockton
Posts: 394
| McCrawlin that me
specs VF Sling Shot chassis with links Revo shocks with yellow springs Axial Axles Axial Tranny with VF dig Integy 55t lathe motor Mayhem Spiders with Panther Tires custom hybrids in the rear and 1 1/2 panther foam up front TCS Four link front and rear RCP c hubs, knuckles, straight axle Hitec HS 5985MG steering this rig apogee 2200mah lipo CENTRAL VALLEY ROCK CRAWLER BABY Last edited by maro69camaro; 08-22-2008 at 05:28 PM. |
07-11-2008, 10:57 PM | #18 |
Pebble Pounder Join Date: Apr 2008 Location: fresno
Posts: 149
|
Scorpion Losi Crawler Shocks Lose Crawler tires Rooster Motor and Speed Control RC Solution Roll Cage stock links (aluminum ones this month) |
08-09-2008, 09:40 AM | #19 |
Newbie Join Date: Aug 2008 Location: Claremont, CA
Posts: 30
|
Axial Scorpion kit -ckc crawlers stage 2 kit -Bent links front and rear -losi rock claws(added after pic) -upgraded drive shafts and yolks -integy axle spacers -lots of mods |
08-17-2008, 04:09 PM | #20 |
Pebble Pounder Join Date: Jul 2008 Location: Las Vegas & Cali.
Posts: 136
|
CDW 2.2 comp chassis Novak "Rooster Crawler" esc Novak 55t motor Spektrum DX3 Stealth B-4 w/ Taylors hobby locker CAC "Sinners" w/ Losi "Rock Claws" |
Thread Tools | |
Display Modes | |
| |