RCCrawler Forums

dpdsurf · 08-01-2008, 03:27 PM

Probably heading down to g-tech around 4:30 today to try some new settings. I think my spaghetti is untangled

noypicrawler · 08-01-2008, 07:02 PM

Been following this thread, I live down in sunnyvale and I got to try this location out two saturday's ago. Planning on heading down there tomorrow around 10. If anyone is interested on some morning crawling feel free to join me, gets boring doing this thing alone sometimes.

Jorge

JeepinDoug · 08-02-2008, 12:09 PM

Quote:

Originally Posted by noypicrawler

Been following this thread, I live down in sunnyvale and I got to try this location out two saturday's ago. Planning on heading down there tomorrow around 10. If anyone is interested on some morning crawling feel free to join me, gets boring doing this thing alone sometimes.

Jorge

Damn, I was just close by, I should have swung by for a battery. Too much family stuff today but I do have time tomorrow.

DPDsurf, how did the new changes go? Any luck on "Hard Luck"?

dpdsurf · 08-02-2008, 08:22 PM

No luck on hard luck. But I wasn't surprised with no shock oil and stock memory foams in the new panthers. I got some 110 wt oil and proline foams today but I'm having a hard time finding exactly what I was looking for as far as foams go. They seam to have firmed up the sidewalls though so we'll see next Wed.

JeepinDoug · 08-03-2008, 02:48 PM

Went out there this morning and filled some holes.
The backside of "fingers crossed" is filled making another tough line around but I didn't spend anytime figuring it out.
The backside of the wedge is filled giving a better transition to "yellow rock".
And the final exit gate after "yellow rock" is filled, eliminating an impossible hole.

halfcab · 08-03-2008, 05:37 PM

no rock stacking, this is not the JEEP Easter safari, climb it or quit.........

no pavement pounders allowed

JeepinDoug · 08-03-2008, 06:41 PM

Kidding aside, I was filling holes to continue and (or) connect lines.
Some lines had boring patches of dirt between them, a couple of rocks changed the way you come off one line and direct you to another. Otherwise it was impossible to change directions.

mr_manny · 08-04-2008, 07:51 AM

after two weeks...I hope I remember how to drive :-P

see you guys Wednesday

Flatty · 08-04-2008, 01:53 PM

I am working on some new suspension ideas right now, so hopefully Iw ill see you guys on Wed. I have a meeting wtih my boss, so I will see how long that goes, and how I feel afterwards.

BTW, what springs do you guys rec for a sprung setup on Traxxas big bores? I am thinking about some Losi's SOFT.

Dima

Flatty · 08-05-2008, 09:06 PM

Don't forget tomorrow we are in San Carlos!!!!!

Dima

JeepinDoug · 08-05-2008, 09:07 PM

San Carlos, Arguello Park.
Wednesday Aug 6th, I'll be there at 5pm.
C'yall there.

ROCKCAD · 08-05-2008, 09:29 PM

IS THIS OPEN INVITE TO ANYONE ? IF SO, WHERE EXACTLY IN ARGUELLO PARK AND DIRECTIONS.. THANKS

Quote:

Originally Posted by JeepinDoug

San Carlos, Arguello Park.
Wednesday Aug 6th, I'll be there at 5pm.
C'yall there.

JeepinDoug · 08-05-2008, 10:30 PM

Quote:

Originally Posted by ROCKCAD

IS THIS OPEN INVITE TO ANYONE ? IF SO, WHERE EXACTLY IN ARGUELLO PARK AND DIRECTIONS.. THANKS

Open invite!!!

Look further up this thread, there is plenty of info;
Park's website and some directions from me.
In the park off Phelps Ave, follow the street to the turn around parking and park. You'll see us, unless your early, then walk past the fenced playground to a arc of rocks. Behind the arc is the waterfall.
You can crawl the whole waterfall, hardlines or easy.

JeepinDoug · 08-05-2008, 10:31 PM

Quote:

Originally Posted by JeepinDoug

This Wednesday night's crawl is relocating.
Arguello Park, San Carlos
Here's the park's link;http://www.cityofsancarlos.org/gov/d...uello_park.asp

The arrow shows where we crawl, the arrow's tail end is where we park on Phelps Ave.
Wellington Ave parking is across the park.
Be there from 5pm till 7:30 or so.

Quoting myself for picture purposes.
Here's a google maps link
http://maps.google.com/maps?source=i...-8&sa=N&tab=wl

ROCKCAD · 08-05-2008, 10:55 PM

THANKS FOR THE INFO. WORK WILLING , I'LL TRY TO MAKE IT! THANKS AGAIN.

Quote:

Originally Posted by JeepinDoug

Quoting myself for picture purposes.
Here's a google maps link
http://maps.google.com/maps?source=i...-8&sa=N&tab=wl

dpdsurf · 08-05-2008, 11:06 PM

You should see me there. I fried my 2000mah

Left it plugged in for 2 days and the castle BEC drained it

Hopefully Allspeed has another or at least another 1320 in. Otherwise it will be a short day me with only 1 1320.

Doug, are you picking up your DX3R tomorrow? They said it would arrive via Fedex tomorrow. I ordered one myself and will be stopping by on my way to SC to pick it up (and hopefully another battery).

JeepinDoug · 08-06-2008, 08:03 AM

Ooff, bad luck on the 2000Mah, that sucks.
My Dx3r might not be in today, order went in late. I'll wait until thursday to check, thx.

Flatty · 08-06-2008, 08:09 AM

I may have to miss it this time again. I will let you know what happens.

Dima

JeepinDoug · 08-06-2008, 10:08 AM

Quote:

Originally Posted by dpdsurf

You should see me there. I fried my 2000mah

Left it plugged in for 2 days and the castle BEC drained it

Hopefully Allspeed has another or at least another 1320 in. Otherwise it will be a short day me with only 1 1320.

Doug, are you picking up your DX3R tomorrow? They said it would arrive via Fedex tomorrow. I ordered one myself and will be stopping by on my way to SC to pick it up (and hopefully another battery).

I have a spare 1320 and my charger.
Call Wes before you go by, he didn't have anything other than another 2000mah Monday. Allspeed 650-872-2012

dpdsurf · 08-06-2008, 12:55 PM

Quote:

Originally Posted by JeepinDoug

I have a spare 1320 and my charger.
Call Wes before you go by, he didn't have anything other than another 2000mah Monday. Allspeed 650-872-2012

Thanks Doug, see you tonight!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-01-2008, 03:27 PM	#81
dpdsurf I wanna be Dave Join Date: Mar 2008 Location: Pacific Ocean Posts: 2,342	Probably heading down to g-tech around 4:30 today to try some new settings. I think my spaghetti is untangled

08-01-2008, 07:02 PM	#82
noypicrawler Newbie Join Date: Nov 2007 Location: sunnyvale Posts: 4	Been following this thread, I live down in sunnyvale and I got to try this location out two saturday's ago. Planning on heading down there tomorrow around 10. If anyone is interested on some morning crawling feel free to join me, gets boring doing this thing alone sometimes. Jorge

08-02-2008, 08:22 PM	#84
dpdsurf I wanna be Dave Join Date: Mar 2008 Location: Pacific Ocean Posts: 2,342	No luck on hard luck. But I wasn't surprised with no shock oil and stock memory foams in the new panthers. I got some 110 wt oil and proline foams today but I'm having a hard time finding exactly what I was looking for as far as foams go. They seam to have firmed up the sidewalls though so we'll see next Wed.

08-03-2008, 02:48 PM	#85
JeepinDoug RCC Addict Join Date: Mar 2008 Location: SSF Posts: 1,614	Went out there this morning and filled some holes. The backside of "fingers crossed" is filled making another tough line around but I didn't spend anytime figuring it out. The backside of the wedge is filled giving a better transition to "yellow rock". And the final exit gate after "yellow rock" is filled, eliminating an impossible hole.

08-03-2008, 05:37 PM	#86
halfcab RCC Addict Join Date: Oct 2005 Location: rite here all along Posts: 1,888	no rock stacking, this is not the JEEP Easter safari, climb it or quit......... no pavement pounders allowed

08-03-2008, 06:41 PM	#87
JeepinDoug RCC Addict Join Date: Mar 2008 Location: SSF Posts: 1,614	Kidding aside, I was filling holes to continue and (or) connect lines. Some lines had boring patches of dirt between them, a couple of rocks changed the way you come off one line and direct you to another. Otherwise it was impossible to change directions.

08-04-2008, 07:51 AM	#88
mr_manny Quarry Creeper Join Date: Mar 2008 Location: san pancho, ca Posts: 224	after two weeks...I hope I remember how to drive :-P see you guys Wednesday

08-04-2008, 01:53 PM	#89
Flatty Quarry Creeper Join Date: Mar 2004 Posts: 235	I am working on some new suspension ideas right now, so hopefully Iw ill see you guys on Wed. I have a meeting wtih my boss, so I will see how long that goes, and how I feel afterwards. BTW, what springs do you guys rec for a sprung setup on Traxxas big bores? I am thinking about some Losi's SOFT. Dima

08-05-2008, 09:06 PM	#90
Flatty Quarry Creeper Join Date: Mar 2004 Posts: 235	Don't forget tomorrow we are in San Carlos!!!!! Dima

08-05-2008, 09:07 PM	#91
JeepinDoug RCC Addict Join Date: Mar 2008 Location: SSF Posts: 1,614	San Carlos, Arguello Park. Wednesday Aug 6th, I'll be there at 5pm. C'yall there.

Sponsored Links

08-05-2008, 11:06 PM	#96
dpdsurf I wanna be Dave Join Date: Mar 2008 Location: Pacific Ocean Posts: 2,342	You should see me there. I fried my 2000mah Left it plugged in for 2 days and the castle BEC drained it Hopefully Allspeed has another or at least another 1320 in. Otherwise it will be a short day me with only 1 1320. Doug, are you picking up your DX3R tomorrow? They said it would arrive via Fedex tomorrow. I ordered one myself and will be stopping by on my way to SC to pick it up (and hopefully another battery).

08-06-2008, 08:03 AM	#97
JeepinDoug RCC Addict Join Date: Mar 2008 Location: SSF Posts: 1,614	Ooff, bad luck on the 2000Mah, that sucks. My Dx3r might not be in today, order went in late. I'll wait until thursday to check, thx.

08-06-2008, 08:09 AM	#98
Flatty Quarry Creeper Join Date: Mar 2004 Posts: 235	I may have to miss it this time again. I will let you know what happens. Dima

RCCrawler Forums

Thread: South San Fran, Wed Night crawls