08-05-2009, 10:59 AM | #1221 |
Quarry Creeper Join Date: May 2008 Location: looking for sponsors
Posts: 462
|
I have the tools to do it but i cant drill strait to save my life lol you would be better off seen if nathan can throw em on a lathe but you can come over and use my drill press if u need to |
Sponsored Links | |
08-05-2009, 11:04 AM | #1222 |
Rock Crawler Join Date: Mar 2008 Location: lodi
Posts: 952
|
how do you not drill straght with a drill press? as long as you mount it correctly the press only goes up and down. ill let you know thx for the offer im actually looking at the ti links that are made on here but at just under 100 bucks i dont think they are worth it i wonder is .375 alum rod could be run through a die and put some 4mm threads on it ohhh nathan ur the expert in this crap chime in will yea i need hellllllp lol looks like .250 in alum rod = 6.35 millimeters which might work better since .375 is over 9 mm Last edited by punkuup5150; 08-05-2009 at 11:21 AM. |
08-05-2009, 12:20 PM | #1223 |
Quarry Creeper Join Date: May 2008 Location: looking for sponsors
Posts: 462
|
yea nathan can help lol if he tells us in english why dont you just go with thicker delrin? |
08-05-2009, 12:28 PM | #1224 |
Rock Crawler Join Date: Mar 2008 Location: lodi
Posts: 952
|
im useing 1/4 inch atm as it is. its breaking right at my bend point where ive heated up the delrin to bend it so its makeing a weak point. i was actually just doing stoppies with my truck yesterday went from my grass to the cement hit reverse and broke a front link dual 35 turn motors on 3s is crazy power and with the weak link in the delrin where i bend them im not sure if they will even last a comp at this point. more testing needs to be done i guess. but this is good to knwo now before our new series starts up
|
08-05-2009, 02:17 PM | #1225 |
Quarry Creeper Join Date: May 2008 Location: looking for sponsors
Posts: 462
|
yup just bring the drill bit i have taps pm me if you need to use my drill press |
08-05-2009, 06:42 PM | #1226 |
Pullman Crawler Join Date: Jul 2007 Location: Pullman
Posts: 497
|
Any up for some crawling a kohls tonght? Oh and on the links. I might be able to get some free time to make up some. But I don't have a 4mm tap or tap drill. For the alum the 4mm is fine but it is a finer thread so I would go with 8-32 or even 10-32 if you run delrin. I would say to use the 3/8" delrin I thought I read that you were using 1/4". And if you are bracking the delrin at your bend try a lower and slower heat when you bend them. If you come out tonight I can take a better look to see what you are talking about.
|
08-05-2009, 09:08 PM | #1227 |
Rock Crawler Join Date: Mar 2008 Location: lodi
Posts: 952
|
i had a meeting untill 7 then came home im going out friday if u wanna come out brad nsr_accord/what ever the **** name he uses now is coming up from santa rosa and bringing his berg. im not having a problem with the tap at 4 mill im useing a 70 pich tooth and its actually holding really well. im only useing a lighter to warm up the derlrin and bending gradually. i figured running a 1/4 inch delrin rod would be fine but with how much this pig weighs it just isnt cutting it i guess it does fine when crawling but im afraid if i happen to fall on a sidehill i may snap a link again.
|
08-05-2009, 09:34 PM | #1228 |
Quarry Creeper Join Date: May 2008 Location: looking for sponsors
Posts: 462
|
i was out at kohls today i love the new foams i wasnt there for long though one of my esc wires came out and i didnt have a soldering iron anyone still out there? |
08-05-2009, 10:00 PM | #1229 |
Pullman Crawler Join Date: Jul 2007 Location: Pullman
Posts: 497
|
I'm house sitting in Modesto till next wed or fri, so im really up for any day. what time you going out Friday?
|
08-05-2009, 10:01 PM | #1230 |
Rock Crawler Join Date: Mar 2008 Location: lodi
Posts: 952
|
ill be out there between 4:30-5:30 depending on when i can get out of work lol
|
08-05-2009, 11:38 PM | #1231 |
Quarry Creeper Join Date: May 2008 Location: looking for sponsors
Posts: 462
|
nathan wanna set up a time to go to that place by you in patterson?
|
08-06-2009, 12:25 PM | #1232 |
Rock Stacker Join Date: Mar 2008 Location: in my cave
Posts: 82
| Comp Dates
okay, i have a question now. why does the comp always land on a Sunday? Could there be any chance for the winter series that maybe 1 or 2 of the dates on be on a saturday? Just askings, thanks Last edited by NSR ACCORD; 08-06-2009 at 12:26 PM. Reason: _______________________________________ |
08-06-2009, 12:35 PM | #1233 |
Rock Crawler Join Date: Mar 2008 Location: lodi
Posts: 952
|
we all work? lol i think the only normal comps on saturdays at at ht concord tryoing to run northbay/norcal and cvrc brad?
|
08-06-2009, 12:39 PM | #1234 |
Rock Stacker Join Date: Mar 2008 Location: in my cave
Posts: 82
| comp dates
i just think it would be cool if one of the date were on a saturday (hint hint spicer) cause i work on every single sunday but have every saturday off for sure. |
08-06-2009, 01:32 PM | #1235 |
Pullman Crawler Join Date: Jul 2007 Location: Pullman
Posts: 497
|
im cool with Saturday or Sundays.
|
08-06-2009, 02:25 PM | #1236 |
Rock Crawler Join Date: Mar 2008 Location: lodi
Posts: 952
|
well i know saturdays are really hard to make for me >_<
|
08-06-2009, 04:56 PM | #1237 |
Quarry Creeper Join Date: May 2008 Location: looking for sponsors
Posts: 462
|
im open any day until monday then i have school |
08-06-2009, 05:05 PM | #1238 |
RCC Addict Join Date: Jun 2006 Location: Sin City
Posts: 1,852
|
We're going to do both Saturday and Sunday comps. The 1st comp will be at Spicers. I need to set up the list comps and dates.
|
08-06-2009, 05:21 PM | #1239 |
Quarry Creeper Join Date: May 2008 Location: looking for sponsors
Posts: 462
|
anyone up for a gtg tonight?
|
08-06-2009, 06:05 PM | #1240 |
Rock Crawler Join Date: Mar 2008 Location: lodi
Posts: 952
|
a group of us are going tomarrow between 43-530 my rigs in lodi and i dunno when ill be off tonight.
|
| |