RCCrawler Forums

zonkerd · 11-25-2011, 10:57 PM

this is johns wraith going around a tube that you can stand in! you can only see the trace of his car

rockin86runner · 11-26-2011, 10:30 AM

Quote:

Originally Posted by dirty530crawlers

They Do But There Hiding in the closet,Im A gv native now in the burbs, I Crawl Daily Hit me up and i can show you the city spots

there are some good ones like this: axial 1.9 scale teaser "Climax Canyon"pt2 MUST SEE! - YouTube

ya justin is workin with his honcho and there was 1 other guy there that has one they just like there comp rigs....lol

Quote:

Originally Posted by fvrr

Shoot, I guess we could have swung by after fast track

Had my mind on other things and only brought enough batteries to run a couple courses.

Normally guys go out every week to mess around and when they do they normally post up here a day or two b4. A couple of us were thinking of heading up to GV Nevada City to check out spots for a stop on our 6 comp series. No scalers @ getahobby

Looks like you and dirty530 need to get something started

haha ya its a fun place there corse takes some skills with my scaler cuz of my tire carrier still working on the build and im still learning how to use it

nissan_driver24 · 11-26-2011, 12:22 PM

Quote:

Originally Posted by dirty530crawlers

Get A Hobby is working on it

Thats why we approached you about the series. when you see what we have up our sleeve we are going to be a great combination

cant wait to have you up!!! oh ya, I drove all over last week while there on my 1.9 flat irons, and the Gusto had some 1.5 boggers that took some skill but he did work!!! so the course is defintley scaler friendly

Is Get A Hobby open this Sunday? I would love to check it out. I'm pretty sure 200 plus gates wouldn't work in a indoor course but maybe the same format?

Jrob · 11-26-2011, 01:49 PM

Quote:

Originally Posted by nissan_driver24

Is Get A Hobby open this Sunday? I would love to check it out. I'm pretty sure 200 plus gates wouldn't work in a indoor course but maybe the same format?

We should be able to run 50+ no problem and a 5 min walk there is a outdoor covered spot that can do another 100+ so lets make it happen Get A Hobby will be open Sunday from 12-4 Here is a comp night compliments of Norcal Git r :http://www.youtube.com/watch?v=uhMPnPLuUWE

Norcal_GIT_r · 11-26-2011, 02:27 PM

I think we can run the course both indoors and outdoors. X amount inside then out the side door. The hillside is good for a few gates then over to the short course track for some gates there. Then I was thinking a an autocross styled tech section back through the lot. Theres room all kinds of stuff if we put our minds together.

Jrob · 11-26-2011, 03:08 PM

Quote:

Originally Posted by Norcal_GIT_r

I think we can run the course both indoors and outdoors. X amount inside then out the side door. The hillside is good for a few gates then over to the short course track for some gates there. Then I was thinking a an autocross styled tech section back through the lot. Theres room all kinds of stuff if we put our minds together.

If we do that we can run a 200+ gate course foresure

GREAT THINKING!!!!!!

fvrr · 11-26-2011, 05:11 PM

If anyone want's a totally custom paint job let me know. I'm going to be sending Jason (rockthrasher) 2 or 3 bodies to paint and maybe we can combine shipping. Kurt @ dynamic concepts donated a body for the R.C.O.T.C comp and I'm going to have jason do up a cool body as well as a couple for myself. Not right away but a couple of weeks. Still have plenty of time until the awards. Just PM me and we can work on the details.

Dan Wilson has also used him and well, the work is outstanding! Here is mine he did a couple months back for my errrrr, comp rig

Norcal_GIT_r · 11-27-2011, 09:04 AM

Thats a beautiful top...I'd end up destroying with my driving..(-8

zonkerd · 11-27-2011, 05:29 PM

Went back out to the culvert with rick,dan and joe did a g6 shake down for 3 hours had a blast. dan broke a bumper,I broke a weld on my boom(from doing wheelies for days) LOL,and joe blew a trans gear.

zonkerd · 11-27-2011, 05:29 PM

zonkerd · 11-27-2011, 05:30 PM

zonkerd · 11-27-2011, 05:30 PM

zonkerd · 11-27-2011, 05:31 PM

zonkerd · 11-27-2011, 05:31 PM

zonkerd · 11-27-2011, 05:33 PM

Jrob · 11-27-2011, 10:44 PM

We are gonna be doing some scalin at deer creek Tuesday come join us we are gonna make a day of it!! and do some filming for some new videos

here is one thats a week old: axial 1.9 scale teaser "Climax Canyon"pt2 MUST SEE! - YouTube

BIGJOEDUCKSLAYE · 11-27-2011, 11:07 PM

Quote:

Originally Posted by zonkerd

Elio that place is a good g6 spot, lots of trails and my tsl's where hooking up so good I broke the only plastic gear left. Look at side walls of rear tires

Jrob · 11-29-2011, 12:28 AM

We are meeting up in Rocklin tomorrow 11/29 In the am around 10, at deer creek to do some crawlin. there is 5 of us already, hopefully we see some of you out there we will be there till about 2:30. and filming for some new videos. deer creek is behind goodyear tires off of pacific rd in rocklin see ya there

zonkerd · 11-29-2011, 08:03 AM

cant make this one work..you have tuesdays off?

11-27-2011, 10:44 PM	#2197
Jrob Quarry Creeper Join Date: Dec 2009 Location: Grass Valley Ca Posts: 326	Tuseday sacle Gtg deer creek Rocklin We are gonna be doing some scalin at deer creek Tuesday come join us we are gonna make a day of it!! and do some filming for some new videos here is one thats a week old: axial 1.9 scale teaser "Climax Canyon"pt2 MUST SEE! - YouTube

11-29-2011, 12:28 AM	#2199
Jrob Quarry Creeper Join Date: Dec 2009 Location: Grass Valley Ca Posts: 326	Crawlin tomorrow We are meeting up in Rocklin tomorrow 11/29 In the am around 10, at deer creek to do some crawlin. there is 5 of us already, hopefully we see some of you out there we will be there till about 2:30. and filming for some new videos. deer creek is behind goodyear tires off of pacific rd in rocklin see ya there

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/california/263495-sacramento-scaler-gtg-comps.html
Posted By	For	Type	Date
Sacramento Scaler GTG/Comps - Page 84 - RCCrawler.com Bulletin Board	This thread	Refback	10-04-2011 03:34 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-25-2011, 10:55 PM	#2181
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024

11-25-2011, 10:57 PM	#2182
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	this is johns wraith going around a tube that you can stand in! you can only see the trace of his car

11-26-2011, 02:27 PM	#2186
Norcal_GIT_r Rock Crawler Join Date: Aug 2008 Location: Somewhere in the Sierras. Posts: 655	I think we can run the course both indoors and outdoors. X amount inside then out the side door. The hillside is good for a few gates then over to the short course track for some gates there. Then I was thinking a an autocross styled tech section back through the lot. Theres room all kinds of stuff if we put our minds together.

11-26-2011, 05:11 PM	#2188
fvrr RCC Addict Join Date: Mar 2009 Location: Across the street from Folsom Prison Posts: 1,081	If anyone want's a totally custom paint job let me know. I'm going to be sending Jason (rockthrasher) 2 or 3 bodies to paint and maybe we can combine shipping. Kurt @ dynamic concepts donated a body for the R.C.O.T.C comp and I'm going to have jason do up a cool body as well as a couple for myself. Not right away but a couple of weeks. Still have plenty of time until the awards. Just PM me and we can work on the details. Dan Wilson has also used him and well, the work is outstanding! Here is mine he did a couple months back for my errrrr, comp rig

11-27-2011, 09:04 AM	#2189
Norcal_GIT_r Rock Crawler Join Date: Aug 2008 Location: Somewhere in the Sierras. Posts: 655	Thats a beautiful top...I'd end up destroying with my driving..(-8

11-27-2011, 05:29 PM	#2190
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	Went back out to the culvert with rick,dan and joe did a g6 shake down for 3 hours had a blast. dan broke a bumper,I broke a weld on my boom(from doing wheelies for days) LOL,and joe blew a trans gear.

11-27-2011, 05:29 PM	#2191
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024

11-27-2011, 05:30 PM	#2192
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024

11-27-2011, 05:30 PM	#2193
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024

11-27-2011, 05:31 PM	#2194
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024

Sponsored Links

11-27-2011, 05:31 PM	#2195
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024

11-27-2011, 05:33 PM	#2196
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024

11-29-2011, 08:03 AM	#2200
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	cant make this one work..you have tuesdays off?

RCCrawler Forums

Thread: Sacramento Scaler GTG/Comps