RCCrawler Forums

Propane · 09-09-2012, 09:41 AM

Can't make this one, gas is too expensive for a round trip today. Have fun guys!

hi its rick · 09-09-2012, 04:15 PM

had a good time out to day besides 2 broke xr shaft's and a locker

zonkerd · 09-09-2012, 04:32 PM

GREAT DAY TODAY WE SET UP A 40 GATE G-6 RUN, THE FIRST 10 WERE BRUTAL

WINCHING,TOW STRAPS JUST THROW IT ALL OUT JUST TO MAKE IT! EVERYONE HAD A GREAT TIME

ONLY TOOK A FEW PICKS ENJOY.

zonkerd · 09-09-2012, 04:32 PM

zonkerd · 09-09-2012, 04:32 PM

zonkerd · 09-09-2012, 04:33 PM

zonkerd · 09-09-2012, 04:33 PM

zonkerd · 09-09-2012, 04:33 PM

Perkolator · 09-09-2012, 04:45 PM

Had a good time. We gotta do this again. Only got a couple pics:

rc crawler builder · 09-09-2012, 08:05 PM

man I wanted to come to this but my truck wasn't ready. maybe next one it will be

sumquak · 09-09-2012, 08:10 PM

thanks for the day guys. next time we'll let Antdog set course,

i didn't drive the course he set 2nd, but it sure looked better than my winch fest we drove 1st

the suspension bridge was tough, but most drove it no problem.

crowninshield3 · 09-09-2012, 08:30 PM

Sweet lil course. Whats the apporx. time to run that mini G6?

Heres some pics of the maiden of my new rig. All went ok, loose front drive line and a smokin Tekin OH YA! Took my wife and kids to the sac airshow and had a blast.

Natedog · 09-10-2012, 11:55 AM

Quote:

Originally Posted by zonkerd

1 INCH RUNNING 600 HUBS IN FRONT AND 350 IN THE REAR, GOING TO BE ADDING A DIG TRANS (MAYBE WILL HAVE IT DONE FOR SUNDAY)

Dangit, too narrow. VP needs to make some 1.35" wide Berg offset wheels for the Wraith. I love my XR beadlocks on my Wraith, but want options in the aftermarket with different hubs like VP. The XR wheels keep almost stock width and properly support the tires for great traction and side-hilling.

zonkerd · 09-10-2012, 11:59 AM

YES AFTER SUNDAY I PUT SOME WIDER HUBS ON, IT WAS STILL TOO NARROW. GOING TO TEST RUN THIS WEEK WITH THE NEW HUBS ON

I have some vp 1.35 wheels..extra

Natedog · 09-10-2012, 03:04 PM

Quote:

Originally Posted by crowninshield3

...Heres some pics of the maiden of my new rig. All went ok, loose front drive line and a smokin Tekin OH YA! Took my wife and kids to the sac airshow and had a blast.

Truck looks great!

Looks like yall had fun.

Natedog · 09-10-2012, 03:06 PM

Quote:

Originally Posted by zonkerd

YES AFTER SUNDAY I PUT SOME WIDER HUBS ON, IT WAS STILL TOO NARROW. GOING TO TEST RUN THIS WEEK WITH THE NEW HUBS ON

I have some vp 1.35 wheels..extra

No wheels are too narrow for Wraith...lol...your truck looks fine. Pics of the 1.35" wide VP wheels? Almost Berg offset?

wheelin_weasel · 09-13-2012, 01:14 PM

well the boss is a d#*k so i wasnt able to make it sunday. i was thinkin about goin up to the shade spot on saturday. Looks awsome can't wait to check it out.
Wonderin if anybody else will be there?

zonkerd · 09-13-2012, 03:09 PM

Dont know? Maybe sunday i know alot of peeps work saturday.

BIGJOEDUCKSLAYE · 09-13-2012, 10:16 PM

Let me know if you go out in the afternoon on sat I might go
I work until 2pm

jscalecrawler · 09-14-2012, 02:32 PM

got some more rock and now i jus need to finish putn the mortor on the moutain, and the course will b set

09-09-2012, 04:15 PM	#4042
hi its rick Pebble Pounder Join Date: Aug 2009 Location: rancho cordova Posts: 195	Re: Sacramento Scaler GTG/Comps had a good time out to day besides 2 broke xr shaft's and a locker

09-09-2012, 04:32 PM	#4043
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	Re: Sacramento Scaler GTG/Comps GREAT DAY TODAY WE SET UP A 40 GATE G-6 RUN, THE FIRST 10 WERE BRUTAL WINCHING,TOW STRAPS JUST THROW IT ALL OUT JUST TO MAKE IT! EVERYONE HAD A GREAT TIME ONLY TOOK A FEW PICKS ENJOY.

09-09-2012, 04:32 PM	#4044
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	Re: Sacramento Scaler GTG/Comps

09-09-2012, 04:32 PM	#4045
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	Re: Sacramento Scaler GTG/Comps

09-09-2012, 04:33 PM	#4046
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	Re: Sacramento Scaler GTG/Comps

09-09-2012, 09:41 AM	#4041
Propane Rock Crawler Join Date: Dec 2009 Location: Redding Posts: 705	Can't make this one, gas is too expensive for a round trip today. Have fun guys!

09-09-2012, 04:33 PM	#4047
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	Re: Sacramento Scaler GTG/Comps

09-09-2012, 04:33 PM	#4048
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	Re: Sacramento Scaler GTG/Comps

09-09-2012, 04:45 PM	#4049
Perkolator Rock Crawler Join Date: Jul 2011 Location: Placer County Posts: 843	Re: Sacramento Scaler GTG/Comps Had a good time. We gotta do this again. Only got a couple pics:

09-09-2012, 08:05 PM	#4050
rc crawler builder Pebble Pounder Join Date: Sep 2005 Location: Citrus Heights, CA Posts: 108	Re: Sacramento Scaler GTG/Comps man I wanted to come to this but my truck wasn't ready. maybe next one it will be

09-09-2012, 08:10 PM	#4051
sumquak Rock Crawler Join Date: Oct 2009 Location: RC Blackhole Posts: 513	Re: Sacramento Scaler GTG/Comps thanks for the day guys. next time we'll let Antdog set course, i didn't drive the course he set 2nd, but it sure looked better than my winch fest we drove 1st the suspension bridge was tough, but most drove it no problem.

09-09-2012, 08:30 PM	#4052
crowninshield3 Pebble Pounder Join Date: Jun 2007 Location: Sacramento Posts: 151	Re: Sacramento Scaler GTG/Comps Sweet lil course. Whats the apporx. time to run that mini G6? Heres some pics of the maiden of my new rig. All went ok, loose front drive line and a smokin Tekin OH YA! Took my wife and kids to the sac airshow and had a blast.

09-10-2012, 11:59 AM	#4054
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	Re: Sacramento Scaler GTG/Comps YES AFTER SUNDAY I PUT SOME WIDER HUBS ON, IT WAS STILL TOO NARROW. GOING TO TEST RUN THIS WEEK WITH THE NEW HUBS ON I have some vp 1.35 wheels..extra

09-13-2012, 01:14 PM	#4057
wheelin_weasel Newbie Join Date: Sep 2012 Location: elk grove Posts: 25	Re: Sacramento Scaler GTG/Comps well the boss is a d#k so i wasnt able to make it sunday. i was thinkin about goin up to the shade spot on saturday. Looks awsome can't wait to check it out. Wonderin if anybody else will be there? Last edited by wheelin_weasel; 09-13-2012 at 01:16 PM.*

09-13-2012, 03:09 PM	#4058
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	Re: Sacramento Scaler GTG/Comps Dont know? Maybe sunday i know alot of peeps work saturday.

Sponsored Links

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/california/263495-sacramento-scaler-gtg-comps.html
Posted By	For	Type	Date
Sacramento Scaler GTG/Comps - Page 84 - RCCrawler.com Bulletin Board	This thread	Refback	10-04-2011 03:34 PM

09-13-2012, 10:16 PM	#4059
BIGJOEDUCKSLAYE Quarry Creeper Join Date: Jul 2008 Location: SACRAMENTO Posts: 294	Re: Sacramento Scaler GTG/Comps Let me know if you go out in the afternoon on sat I might go I work until 2pm

09-14-2012, 02:32 PM	#4060
jscalecrawler Pebble Pounder Join Date: Nov 2010 Location: citrus hts Posts: 135	Re: Sacramento Scaler GTG/Comps got some more rock and now i jus need to finish putn the mortor on the moutain, and the course will b set

RCCrawler Forums

Thread: Sacramento Scaler GTG/Comps