RCCrawler Forums

fvrr · 03-02-2013, 07:42 PM

Went to the rodeo grounds and more or less ran the 1st RCOTC course with my twin hammers and it did ok. With the winch should be fine. Just doesn't crawl like a purpose built rig but sure does go fast

Same place with the bug, made it but slipped off the rock

Same spot with the bug

BIGJOEDUCKSLAYE · 03-03-2013, 11:49 AM

Martin do you have rear swaybar yet? It made a big differance on mine for crawling. I also changed pinnion to 25 tooth count and now crawls nice

fvrr · 03-03-2013, 11:56 AM

Quote:

Originally Posted by BIGJOEDUCKSLAYE

Martin do you have rear swaybar yet? It made a big differance on mine for crawling. I also changed pinnion to 25 tooth count and now crawls nice

Not yet Joe. It's still stock with 5k weight in front. I have a rs and roc motor sitting but I'm thinking of putting that in the bug. I like the fast part

It keeps wanting to flip over on the verticles. I only have the rc4wd winch on there hoping it will be ok due to weight but need to move the button on my mt4. Keep bumping it.

From my phone using my fingers.

BIGJOEDUCKSLAYE · 03-03-2013, 05:02 PM

The stock motor feels pretty strong on 3s just change the esc and servos. I used diff. putty in front and it works great. A little slip but it will still pull and not break dogbones!

motox67 · 03-03-2013, 09:48 PM

figure id post a pic of my xj

KBess1110 · 03-03-2013, 10:19 PM

Got it working today. All it was is the esc was set to high voltage motor...

Sent from my SCH-I605 using Tapatalk 2

minicrawlerguy530 · 03-08-2013, 09:44 AM

Hey Kbess what rig are you rockin these days?

KBess1110 · 03-08-2013, 10:59 AM

Quote:

Originally Posted by minicrawlerguy530

Hey Kbess what rig are you rockin these days?

Fo some reason I cant post pics. But my wraith! Just got some axial beadlocks with green rings for her and a decent $100 titanium/digital servo, vanquish lockout, chubs and knuckles. All black everything accept interior

toaster406 · 03-08-2013, 12:00 PM

pretty good flex for leaf springs

minicrawlerguy530 · 03-08-2013, 06:30 PM

Oh nice. I just got a wraith off here about a week ago. A pretty much stock kit one.

brokennib · 03-09-2013, 01:56 PM

I'll be down at the Rodeo grounds in Folsom for a shakedown run with Martin. About 10 am if anybody is interested. (tommorow is daylight saving time-spring forward, woo hoo.)

fvrr · 03-09-2013, 02:18 PM

You know spring forward after you go to bed right lol I'll be there around 10, don't show up at 11

opps my bad, is it tonight?

From my phone using my fingers.

brokennib · 03-09-2013, 02:24 PM

Quote:

Originally Posted by fvrr

You know spring forward after you go to bed right lol I'll be there around 10, don't show up at 11

opps my bad, is it tonight?

From my phone using my fingers.

That's what my calendar says.

fvrr · 03-10-2013, 12:02 PM

Rodeo grounds are closed because of a bike race today.

From my phone using my fingers.

KBess1110 · 03-10-2013, 01:48 PM

Quote:

Originally Posted by minicrawlerguy530

Oh nice. I just got a wraith off here about a week ago. A pretty much stock kit one.

Ohh sweet. Mine was pretty stock until a few days ago. Only this that making a difference to me is the servo I out in

Sent from my SCH-I605 using Tapatalk 2

njacobster · 03-12-2013, 09:56 PM

Quote:

Originally Posted by toaster406

Always need some rock no matter what its made of

PM the details and I'll drop some off. Weekends are good.

KBess1110 · 03-17-2013, 01:02 AM

Ill be going out tomorrow around noon with a few guys...we'll be at dottons!

Sent from my SCH-I605 using Tapatalk 2

Natedog · 03-17-2013, 05:37 PM

Anybody up for crawl this afternoon or evening? 913-304...3 eight two seven

KBess1110 · 03-17-2013, 05:39 PM

Quote:

Originally Posted by Natedog

Anybody up for crawl this afternoon or evening? 913-304...3 eight two seven

Just left dottons. Theirs still 2 people there

Sent from my SCH-I605 using Tapatalk 2

Natedog · 03-18-2013, 12:04 AM

Quote:

Originally Posted by KBess1110

Just left dottons. Theirs still 2 people there

Sent from my SCH-I605 using Tapatalk 2

Thanks for the reply, but we ended up running somewhere else.

03-02-2013, 07:42 PM	#4581
fvrr RCC Addict Join Date: Mar 2009 Location: Across the street from Folsom Prison Posts: 1,081	Re: Sacramento Scaler GTG/Comps Went to the rodeo grounds and more or less ran the 1st RCOTC course with my twin hammers and it did ok. With the winch should be fine. Just doesn't crawl like a purpose built rig but sure does go fast Same place with the bug, made it but slipped off the rock Same spot with the bug

03-03-2013, 11:49 AM	#4582
BIGJOEDUCKSLAYE Quarry Creeper Join Date: Jul 2008 Location: SACRAMENTO Posts: 294	Re: Sacramento Scaler GTG/Comps Martin do you have rear swaybar yet? It made a big differance on mine for crawling. I also changed pinnion to 25 tooth count and now crawls nice

03-03-2013, 05:02 PM	#4584
BIGJOEDUCKSLAYE Quarry Creeper Join Date: Jul 2008 Location: SACRAMENTO Posts: 294	Re: Sacramento Scaler GTG/Comps The stock motor feels pretty strong on 3s just change the esc and servos. I used diff. putty in front and it works great. A little slip but it will still pull and not break dogbones!

03-03-2013, 09:48 PM	#4585
motox67 Newbie Join Date: Sep 2006 Location: Rocklin Posts: 35	Re: Sacramento Scaler GTG/Comps figure id post a pic of my xj

03-08-2013, 09:44 AM	#4587
minicrawlerguy530 Quarry Creeper Join Date: Dec 2011 Location: Willows Posts: 436	Re: Sacramento Scaler GTG/Comps Hey Kbess what rig are you rockin these days?

03-03-2013, 10:19 PM	#4586
KBess1110 Quarry Creeper Join Date: Feb 2012 Location: Roseville Posts: 300	Got it working today. All it was is the esc was set to high voltage motor... Sent from my SCH-I605 using Tapatalk 2

03-08-2013, 12:00 PM	#4589
toaster406 Newbie Join Date: Mar 2011 Location: Loomis Posts: 41	Re: Sacramento Scaler GTG/Comps pretty good flex for leaf springs

03-08-2013, 06:30 PM	#4590
minicrawlerguy530 Quarry Creeper Join Date: Dec 2011 Location: Willows Posts: 436	Re: Sacramento Scaler GTG/Comps Oh nice. I just got a wraith off here about a week ago. A pretty much stock kit one.

03-09-2013, 01:56 PM	#4591
brokennib Rock Crawler Join Date: Jan 2008 Location: Lincoln Posts: 740	Re: Sacramento Scaler GTG/Comps I'll be down at the Rodeo grounds in Folsom for a shakedown run with Martin. About 10 am if anybody is interested. (tommorow is daylight saving time-spring forward, woo hoo.)

03-09-2013, 02:18 PM	#4592
fvrr RCC Addict Join Date: Mar 2009 Location: Across the street from Folsom Prison Posts: 1,081	You know spring forward after you go to bed right lol I'll be there around 10, don't show up at 11 opps my bad, is it tonight? From my phone using my fingers.

03-10-2013, 12:02 PM	#4594
fvrr RCC Addict Join Date: Mar 2009 Location: Across the street from Folsom Prison Posts: 1,081	Rodeo grounds are closed because of a bike race today. From my phone using my fingers.

03-17-2013, 01:02 AM	#4597
KBess1110 Quarry Creeper Join Date: Feb 2012 Location: Roseville Posts: 300	Ill be going out tomorrow around noon with a few guys...we'll be at dottons! Sent from my SCH-I605 using Tapatalk 2

03-17-2013, 05:37 PM	#4598
Natedog I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia Posts: 12,107	Re: Sacramento Scaler GTG/Comps Anybody up for crawl this afternoon or evening? 913-304...3 eight two seven

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/california/263495-sacramento-scaler-gtg-comps.html
Posted By	For	Type	Date
Sacramento Scaler GTG/Comps - Page 84 - RCCrawler.com Bulletin Board	This thread	Refback	10-04-2011 04:34 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links

RCCrawler Forums

Thread: Sacramento Scaler GTG/Comps