RCCrawler Forums

fvrr · 08-08-2011, 09:32 PM

Quote:

Originally Posted by zonkerd

added a hoop over the light(out of piano wire) pretty strong see if its g6 proven

Oh my, without a strut I don't think it will handle G6 carnage

But only time will tell, turned out nice

brokennib · 08-08-2011, 10:03 PM

Quote:

Originally Posted by zonkerd

added a hoop over the light(out of piano wire) pretty strong see if its g6 proven

Cool, that looks badass!

zonkerd · 08-08-2011, 10:28 PM

are you guys using any weight in the rear rims? if how much..im running just weight in the front rims.

brokennib · 08-09-2011, 04:35 PM

Quote:

Originally Posted by zonkerd

are you guys using any weight in the rear rims? if how much..im running just weight in the front rims.

I run the same weight in all 4 wheels,( I forget how much), but it helps keep the rear of the truck planted on downhill stretches. The rest of my weight i try to keep low and up front.

zonkerd · 08-10-2011, 07:03 PM

anybody going out this weekend? need to do a little shake down the f-100

anyone check folsom yet?

Tom_Swanson · 08-10-2011, 09:42 PM

I run 3 oz in each tire and the battery up front to have that little extra up front for climbing up hill I went to Folsom last week and it was very high still but I did notice that the river has droped like 10 feet in the last 2 days so they may have let out some.

Tom_Swanson · 08-10-2011, 09:45 PM

Hey zonk I know you have a wraith also do you feel that your wraith crawls 100 times better than your truck scaler? I do t know if I hit the nail right on the head with my wraith or not but it seems that it will do so much more than my scx10 I kinda don't even want to drive it because it no challenge on most obstacles.

zonkerd · 08-10-2011, 10:01 PM

yes no challenges compaired to out 1.9 but, too easy sometimes thats why im going to run my 1.9 on the next g6. I have a brushless system in mine so it coggs on slow crawling.so mine is more for racing.

StEv0 · 08-10-2011, 10:47 PM

hey im lookin for scale gtg's here in sac area

tryin to find people wheel with

zonkerd · 08-11-2011, 11:34 AM

I MIGHT HIT THE LAKE THIS WEEKEND

SEE HOW HIGH IT IS STILL

catpwred · 08-11-2011, 11:46 AM

hey E the wifey and few of are friends went to the lake last saturday and the gate was closed right after the boat ramp at granite bay so i thought id give u a heads up dont know if u got a pass for this yr and dont want u to spend 20 bucks gettin in there for nothin. not sure how much it is this yr to go in the lake but im sure the state rised the price agian this yr.

i went and look at the state web site to see if any closings were posted and of course there was nothin posted reguardin granite bay the only closing they had list was the penisula which is out of cool.

zonkerd · 08-11-2011, 12:31 PM

THANKS FOR THE HEADS UP

I HAVE A PASS.

Smoke&Mirrors · 08-11-2011, 05:28 PM

I called the park to ask about Dotton's, Beaks, and Oak. The ranger said the gate is closed on the weekends to those points and I'm sure I've heard that before. Does anyone know if it is still possible to wheel out from the boat launch area? I'm sure the high waters have made it mucky, but I don't know just how high the water levels are. If it's too high I reckon I'll still head to the rodeo. Though I bet if we could get to the upper trails at Dotton's, they would still be good.

zonkerd · 08-11-2011, 10:10 PM

thinking about going this weekend,will know what day and time friday night.

zonkerd · 08-12-2011, 03:03 PM

LOOKS LIKE SUNDAY ME AND JOE ARE GOING OUT TO FOLSOM TO DO SOME SCALING..LET ME KNOW WHO WANTS TO GO

209SCXCRAWLER · 08-12-2011, 08:13 PM

Wanting to go, and being able to go are two very different things lol
If my tranny output gear hadnt just snapped off, i'd totally be down to go.

Maybe next time huh?

You guys have fun!!!

VP Dan · 08-12-2011, 11:14 PM

i wish have to work at a 11 am till 12 am sucks to be me

zonkerd · 08-14-2011, 03:53 PM

me and joe went out to folsom still closed

so we went out front before the gate to test and tune. happy with the f-100 dont have to change anything

zonkerd · 08-14-2011, 03:53 PM

jay d lo · 08-15-2011, 05:45 PM

1.9 pittbull rockbeast tire are in stock at rc country.

08-10-2011, 07:03 PM	#1925
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	anybody going out this weekend? need to do a little shake down the f-100anyone check folsom yet? Last edited by zonkerd; 08-10-2011 at 07:23 PM.

08-11-2011, 11:34 AM	#1930
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	I MIGHT HIT THE LAKE THIS WEEKENDSEE HOW HIGH IT IS STILL

08-11-2011, 11:46 AM	#1931
catpwred Quarry Creeper Join Date: Mar 2009 Location: fair oaks ca Posts: 439	hey E the wifey and few of are friends went to the lake last saturday and the gate was closed right after the boat ramp at granite bay so i thought id give u a heads up dont know if u got a pass for this yr and dont want u to spend 20 bucks gettin in there for nothin. not sure how much it is this yr to go in the lake but im sure the state rised the price agian this yr. i went and look at the state web site to see if any closings were posted and of course there was nothin posted reguardin granite bay the only closing they had list was the penisula which is out of cool. Last edited by catpwred; 08-11-2011 at 12:11 PM.

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/california/263495-sacramento-scaler-gtg-comps.html
Posted By	For	Type	Date
Sacramento Scaler GTG/Comps - Page 84 - RCCrawler.com Bulletin Board	This thread	Refback	10-04-2011 04:34 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-08-2011, 10:28 PM	#1923
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	are you guys using any weight in the rear rims? if how much..im running just weight in the front rims.

08-10-2011, 09:42 PM	#1926
Tom_Swanson Rock Stacker Join Date: Sep 2010 Location: Nor Cal Posts: 88	I run 3 oz in each tire and the battery up front to have that little extra up front for climbing up hill I went to Folsom last week and it was very high still but I did notice that the river has droped like 10 feet in the last 2 days so they may have let out some.

08-10-2011, 09:45 PM	#1927
Tom_Swanson Rock Stacker Join Date: Sep 2010 Location: Nor Cal Posts: 88	Hey zonk I know you have a wraith also do you feel that your wraith crawls 100 times better than your truck scaler? I do t know if I hit the nail right on the head with my wraith or not but it seems that it will do so much more than my scx10 I kinda don't even want to drive it because it no challenge on most obstacles.

08-10-2011, 10:01 PM	#1928
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	yes no challenges compaired to out 1.9 but, too easy sometimes thats why im going to run my 1.9 on the next g6. I have a brushless system in mine so it coggs on slow crawling.so mine is more for racing.

08-10-2011, 10:47 PM	#1929
StEv0 Rock Stacker Join Date: Mar 2011 Location: sacramento Posts: 68	hey im lookin for scale gtg's here in sac area tryin to find people wheel with

08-11-2011, 12:31 PM	#1932
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	THANKS FOR THE HEADS UP I HAVE A PASS.

08-11-2011, 05:28 PM	#1933
Smoke&Mirrors Newbie Join Date: Feb 2008 Location: Sacramento Posts: 46	I called the park to ask about Dotton's, Beaks, and Oak. The ranger said the gate is closed on the weekends to those points and I'm sure I've heard that before. Does anyone know if it is still possible to wheel out from the boat launch area? I'm sure the high waters have made it mucky, but I don't know just how high the water levels are. If it's too high I reckon I'll still head to the rodeo. Though I bet if we could get to the upper trails at Dotton's, they would still be good.

08-11-2011, 10:10 PM	#1934
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	thinking about going this weekend,will know what day and time friday night.

08-12-2011, 03:03 PM	#1935
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	LOOKS LIKE SUNDAY ME AND JOE ARE GOING OUT TO FOLSOM TO DO SOME SCALING..LET ME KNOW WHO WANTS TO GO

08-12-2011, 08:13 PM	#1936
209SCXCRAWLER Quarry Creeper Join Date: Dec 2010 Location: Lodi Posts: 345	Wanting to go, and being able to go are two very different things lol If my tranny output gear hadnt just snapped off, i'd totally be down to go. Maybe next time huh? You guys have fun!!!

Sponsored Links

08-12-2011, 11:14 PM	#1937
VP Dan RCC Addict Join Date: Sep 2009 Location: sacramento Posts: 1,977	i wish have to work at a 11 am till 12 am sucks to be me

08-14-2011, 03:53 PM	#1938
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	me and joe went out to folsom still closed so we went out front before the gate to test and tune. happy with the f-100 dont have to change anything

08-14-2011, 03:53 PM	#1939
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024

08-15-2011, 05:45 PM	#1940
jay d lo Newbie Join Date: Feb 2008 Location: sacramento Posts: 3	1.9 pittbull rockbeast tire are in stock at rc country.

RCCrawler Forums

Thread: Sacramento Scaler GTG/Comps