NCVRCC 2010/2011 Comp Series

[mxracer33x]

Cant wait for the next one!

what are the scale Minimum point requirements going to be. We are in the process of getting the girls scaler built so she can do more "bashing" than crawling.

[abadk9420]

1 week till the next comp, rig is ready, going to give some Axial CVD's with Gunner pins a try, I hope they hold up, I am getting tired of breaking axles, man I need a MOA rig, LOL!!!!

[mxracer33x]

Originally Posted by abadk9420

1 week till the next comp, rig is ready, going to give some Axial CVD's with Gunner pins a try, I hope they hold up, I am getting tired of breaking axles, man I need a MOA rig, LOL!!!!

It sounds like you already have the pins, but if not Ive got a couple sets just sitting here Id gladly give you.

[AlphaQup]

the gunnar pins are many times stronger than stock, but i still broke them on a hard dig. i went back to dog bones. seems to me that worn out dog bones turn as much if not more than cvds.

[abadk9420]

Originally Posted by mxracer33x

It sounds like you already have the pins, but if not Ive got a couple sets just sitting here Id gladly give you.

Yeah I got a set of them already but would gladly take the extras you have as back ups, because knowing me i will need them, LOL!!!

Originally Posted by AlphaQup

the gunnar pins are many times stronger than stock, but i still broke them on a hard dig. i went back to dog bones. seems to me that worn out dog bones turn as much if not more than cvds.

I went back to dog bones and cups as well but I have been blowing them apart as well, this will be my first try with the Axial version of CVD's, I had pretty good luck for a while with the MIP's but then they started blowing apart as well, I just can't bring myself to by 300's when I know i will eventually get a MOA rig.

[AlphaQup]

Originally Posted by abadk9420

I just can't bring myself to by 300's when I know i will eventually get a MOA rig.

I know the feeling. If you do blow one I have an extra with a Gunnar pin in it.

[abadk9420]

Originally Posted by AlphaQup

I know the feeling. If you do blow one I have an extra with a Gunnar pin in it.

Thanks, I just hope I don't need it, I have gone through way to many axles over this last year, but I guess a rig always has a weak link some where and mine just seems to be the axles lately, LOL!!!!

[Big Bill]

Originally Posted by mxracer33x

Cant wait for the next one!

what are the scale Minimum point requirements going to be. We are in the process of getting the girls scaler built so she can do more "bashing" than crawling.

I was going to run the scale part of the comp. for Andy but I kind of flaked on the club as I have been out of the area trying to sell our other house. I hope to be back in time for the Dec. comp. and will see if Andy will give me another shot at the job. I thought about using the MSD rules for scale points and course rules also. I dont think there would be a Minimun requirement, that way anyone who wanted to run their SCALER on the course could. Thanks

[abadk9420]

Originally Posted by Big Bill

I was going to run the scale part of the comp. for Andy but I kind of flaked on the club as I have been out of the area trying to sell our other house. I hope to be back in time for the Dec. comp. and will see if Andy will give me another shot at the job. I thought about using the MSD rules for scale points and course rules also. I dont think there would be a Minimun requirement, that way anyone who wanted to run their SCALER on the course could. Thanks

So Bill I just wanted to check and see how the Dec 4th comp is looking for you at the Oroville fish hatchery? Then you can get some scaler stuff going for all the scaler guys, might even draw a few guys from over the hill, LOL!!! Hope you can make it

[Big Bill]

Originally Posted by abadk9420

So Bill I just wanted to check and see how the Dec 4th comp is looking for you at the Oroville fish hatchery? Then you can get some scaler stuff going for all the scaler guys, might even draw a few guys from over the hill, LOL!!! Hope you can make it

Iam should be home today, I will get in touch with you later this week to hopefully set something up.

[abadk9420]

Sounds good Bill, It would be like old times having you at a NCVRCC comp again

[Big Bill]

Thanks Curtis, Iam really looking forward to it.

[travis c.]

Where is the sign-up thread for the Dec. 4th comp, only 1.5 weeks away!

[AlphaQup]

Originally Posted by travis c.

Where is the sign-up thread for the Dec. 4th comp, only 1.5 weeks away!

Try the competiton thread!

[travis c.]

Originally Posted by AlphaQup

Try the competiton thread!

I can't find a thread for "competiton" could you please post a link.

[abadk9420]

Sign ups are open for this Saturdays comp at the Rocklin Hobby Town Indoor crawler course, See ya there!!!!

NCVRCC COMP HobbyTown Rocklin 01/08/11

[NorCalScaleCrawlers]

anything yet on scaler rules and such?? good to see this going to bad that its been goin on for a couple months i would have hurried up and built my crawler

[-w-designs]

anything yet on scaler rules and such??

The scalers never took off. Nobody stepped up to run that portion and there weren't that many with scalers anyway......check out RECON and there is a scaler group in the SAC area.

to bad that its been goin on for a couple months i would have hurried up and built my crawler

We start up every October and everything is posted here.......you can still build it and come play with us......


Here are the current series results. (2 throwouts) Remember top 5 go to the Norther Cali Finals in June......probably going to be held at Cisco Grove.......

[jammin311]

How dose that work I go to the comp get 18 and bill dose not and gets a 100 and he still moves up in the series. just wondering

[AlphaQup]

Originally Posted by jammin311

How dose that work I go to the comp get 18 and bill dose not and gets a 100 and he still moves up in the series. just wondering

Read the fine print. 2 throwouts. Hater! Jk