NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis http://www.nordiccrawlerdesign.com/B...ot/Banner2.jpg THIS PRODUCTS IS NO LONGER OFFERED BY NCD. NCD IS NOT IN BUSINESS. Sudu One FL The SuDu One FL is a Face Lift version of the original Sudu One high performance chassis for the 2.2 Shafty and Sportsman classes. The chassis is made out of 2mm carbon fiber and the base chassis weighs in at 64g. Hardware is is mix of aluminum and steel. The chassis will work well with both AX10 and AR60 axles. Recommended shock length is 90-95mm. http://www.nordiccrawlerdesign.com/T...duonefl_lw.jpg Sportman Bodiless Chassis Options There are two cab designs available. One with a squarish topper and one with a more rounded profile. Please specify which one you are interested in. http://i438.photobucket.com/albums/q.../SuDuOne_3.jpg http://i438.photobucket.com/albums/q...psb1a9548c.jpg Sudu One Accessories Lower links Delrin or titanium lower links available. http://i1123.photobucket.com/albums/...ps73f0789c.jpg Rod ends are not included. Suitable rod end is the Traxxas Revo rod end, TRA5347. Pics of Ti links coming soon. 4-Link Plates Front 4-link #1 http://www.nordiccrawlerdesign.com/T...link_etray.jpg This plate gives you three optional positions to mount your servo. The servo can be mounted in the middle of the plate or at either end. With the servo mounted to the side there is plenty of room for your battery on the other side. This 4-link plate is a good choice if you are looking to set up a BTA steering as it frees up a lot of room behind your axle. Front 4-link #2 http://www.nordiccrawlerdesign.com/T...batt_under.jpg This tray allows you to mount your servo and small size battery (3S 400mAh lipo recommended) under the plate for a low center of gravity. This setup also allows for a BTA steering setup but is more challenging to set up. Rear 4-Link http://www.nordiccrawlerdesign.com/T...ar4linknr1.jpg |
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis This chassis looks great"thumbsup" |
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis Looks great tomi |
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis so the cab will just eventually just bolt on this chassis? |
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis Quote:
There will only be one version of the base chassis. As is it is comp legal for the 2.2 Shafty and Sportsman classes. As the Sportsman class also allows bodiless chassis's the cab will be an option for this class. All base chassis's sold can have a cab mounted later with no modifications to the base needed. This is how the cab that is being tested looks. Also notice the separate hood that makes the chassis meet the overall lenght requirement. http://i438.photobucket.com/albums/q.../SuDuOne_3.jpg |
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis Nice. I like the milled out skid plate! |
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis Quote:
|
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis nice, love that chassis |
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis I like it could assert for a lcc? a greeting |
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis Quote:
|
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis OK thanks I'll be outstanding to this thread"thumbsup" a greeting |
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis Douwe just showed me pics of a Losi skid plate for the SuDu One chassis. I will make a test piece asap and send it to him for mock up. Tomi |
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis Hey Boss I have also been asked can it be made to suit a Venom to? I personally have never seen a venom skid so I don't know if is possible . Thought I'd mention in here. |
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis Can't wait to see the lnc version... I might have to get one when there available..:mrgreen: |
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis Get the LCC chassis and i will buy the first one (subject to seeing it first:lmao:) Looking around for a light weight LCC chassis"thumbsup" |
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis Quote:
I can tell you for a dig... dont think there is a lot of room left ;) |
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis I am going to order one, will they come with panels for the sides,roof and hood? |
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis Quote:
I am willing to take the chance though"thumbsup" |
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis Hello I just checked the trany of lcc and lnc and holes are equal. a greeting"thumbsup" |
Re: NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis Quote:
|
All times are GMT -6. The time now is 09:41 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com