NCD High Performance Carbon Fiber 2.2 Shafty/Sportsman Chassis

[Tomy]

THIS PRODUCTS IS NO LONGER OFFERED BY NCD. NCD IS NOT IN BUSINESS.


Sudu One FL

The SuDu One FL is a Face Lift version of the original Sudu One high performance chassis for the 2.2 Shafty and Sportsman classes.

The chassis is made out of 2mm carbon fiber and the base chassis weighs in at 64g. Hardware is is mix of aluminum and steel. The chassis will work well with both AX10 and AR60 axles. Recommended shock length is 90-95mm.







Sportman Bodiless Chassis Options

There are two cab designs available. One with a squarish topper and one with a more rounded profile. Please specify which one you are interested in.







Sudu One Accessories

Lower links

Delrin or titanium lower links available.




Rod ends are not included. Suitable rod end is the Traxxas Revo rod end, TRA5347.

Pics of Ti links coming soon.



4-Link Plates

Front 4-link #1



This plate gives you three optional positions to mount your servo. The servo can be mounted in the middle of the plate or at either end. With the servo mounted to the side there is plenty of room for your battery on the other side. This 4-link plate is a good choice if you are looking to set up a BTA steering as it frees up a lot of room behind your axle.



Front 4-link #2



This tray allows you to mount your servo and small size battery (3S 400mAh lipo recommended) under the plate for a low center of gravity. This setup also allows for a BTA steering setup but is more challenging to set up.




Rear 4-Link

[63comet]

This chassis looks great

[roxx]

Looks great tomi

[redneckrampage]

so the cab will just eventually just bolt on this chassis?

[Tomy]

Originally Posted by redneckrampage

so the cab will just eventually just bolt on this chassis?

Correct.

There will only be one version of the base chassis. As is it is comp legal for the 2.2 Shafty and Sportsman classes. As the Sportsman class also allows bodiless chassis's the cab will be an option for this class. All base chassis's sold can have a cab mounted later with no modifications to the base needed.

This is how the cab that is being tested looks. Also notice the separate hood that makes the chassis meet the overall lenght requirement.

[63comet]

Nice. I like the milled out skid plate!

[Tomy]

Originally Posted by 63comet

Nice. I like the milled out skid plate!

Thanks! This is the skid plate that will come with all chassis's.

[newbe5.9]

nice, love that chassis

[antonio-malaga]

I like it
could assert for a lcc?

a greeting

[douwe]

Originally Posted by antonio-malaga

I like it
could assert for a lcc?

a greeting

I am working on it... I have a lnc transmission over here. I have only to make a different skid i hope

[antonio-malaga]

OK thanks
I'll be outstanding to this thread

a greeting

[Tomy]

Douwe just showed me pics of a Losi skid plate for the SuDu One chassis. I will make a test piece asap and send it to him for mock up.

Tomi

[Oz Bruiser]

Hey Boss I have also been asked can it be made to suit a Venom to? I personally have never seen a venom skid so I don't know if is possible . Thought I'd mention in here.

[zeko]

Can't wait to see the lnc version... I might have to get one when there available..

[BDR]

Get the LCC chassis and i will buy the first one (subject to seeing it first)

Looking around for a light weight LCC chassis

[douwe]

Originally Posted by BDR

Get the LCC chassis and i will buy the first one (subject to seeing it first)

Looking around for a light weight LCC chassis

Is there any difference in mountingpoints of the lnc and the lcc???

I can tell you for a dig... dont think there is a lot of room left ;)

[redneckrampage]

I am going to order one, will they come with panels for the sides,roof and hood?

[BDR]

Originally Posted by douwe

Is there any difference in mountingpoints of the lnc and the lcc???

I can tell you for a dig... dont think there is a lot of room left ;)

I honestly don't know what if any differance are in the cases between the LNC\LCC

I am willing to take the chance though

[antonio-malaga]

Hello
I just checked the trany of lcc and lnc and holes are equal.

a greeting

[Tomy]

Originally Posted by redneckrampage

I am going to order one, will they come with panels for the sides,roof and hood?

Panels will be available when the cab is officially released.