Bulldog Pitbull 2.2Pro chassis on Sale!

[ClassiCutCustoms]

On sale and ready to ship NOW.....

ClassiCutCNCCustoms presents the PitBull 2.2Pro MOA Carbon Fiber Chassis.

This chassis is the result of several months of testing and various design changes. It is designed to meet 2013 3x3x8 specs. This chassis has been in the hands of a multiple time Nationals qualifer and State Champ and he has declared it "PERFECT". I will let you decide but it has exceeded my wildest dreams for what a 2.2Pro should be capable of doing.

This chassis is built from 2mm carbon fiber and allows for the maximum clearance possible with today's axles, shocks, and electronics. The chassis works with 90-100mm shocks but I find 95mm to be a sweet spot for me. This chassis is designed to be setup in various configurations. I have sketched it out in CAD and can give lower link lengths and shock positions for 60/40, 55/45, or 50/50 setups. The upper link mounting holes are double rows both front and rear to allow for fine tuning for drivers of all experience levels. From stable and predictable to aggressive and twitchy, this chassis has it all.

Another area of excellence is the skid plate. This skid was the combination of three different designs. This one-piece delrin skid adds rigidity and reliability to an already wonderful design. If you have ever had problems with your lower link screws backing out from chassis racking your problems are solved with this design.

Try it.....you will like it.

The chassis, skid, delrin spacers, and hardware is priced at $149.99 shipped in the lower 48. PM for international shipping quote.

PayPal address is barryjanzen AT Yahoo DOT com.

Thanks for looking.....












Box of chassis ready for assembly and shipping..... I plan to have quick and reliable shipping.....

[ClassiCutCustoms]

Anyone interested in skins for the Pitbull chassis..... Templates have been given to

Krawler Konceptz

[ClassiCutCustoms]

Anyone interested in upgrading to a full Berg-In-A-Box kit it looks like this..... Chassis $149, Ti links $119, Bulldog Berg Gear cases $199, Bulldog Berg tubes $129.



All for the bargain price of $599.00 shipped in the CONUS.

International Express shipping is $45 extra with delivery under a week and full tracking information.

[ClassiCutCustoms]

Build threads....

http://www.rccrawler.com/forum/enroute-berg/461938-obes-bulldog-pitbull-build-post4478844.html

Another.....

Bulldog Berg Build for 2014

[obebaldone1]

Glad to see it posted up Barry. 99 bucks on the first run is a killer deal.

[Calderwood]

Amazing price!

[ClassiCutCustoms]

It's my goal to put some life back in to this hobby with quality products at affordable prices. I am happy to make a reasonable profit and keep the customer coming back for more. This has worked well for my other business for more than 12 years

Sent from my XT912 using Tapatalk 4

[bigstu]

On the waiting list for the new Bully2 axles, and since the logo is a ticked off bulldog, I think the right chassis to use would be the Bulldog Pitbull.

Keep your eyes open, build thread to come...
And I won't photobomb this thread mustangboy.. LOL

[ClassiCutCustoms]

I hear you...... Chassis going out in the morning. I'd be careful.... Paybacks are a bitch

[Calderwood]

Originally Posted by ClassiCutCustoms

I really like the looks of this chassis and with your great pricing I think you will do really well with your efforts. Do you hand finish the chassis plates after they come off the machine? I can't tell if the fuzzy is just the picture or carbon fibers. If its the latter than you're making me itch from here!

[ClassiCutCustoms]

You are correct..... They are messy to make. I have already been through this box and cleaned them up.... They are covered in carbon dust and fibers. You should see my hands after an hour or so!

[boosted4lyf]

Very cool chassis man, but that name is f#cking w/my head.

Will you be designing a super chassis? Maybe the Irish wolfhound/mastiff

[Calderwood]

Originally Posted by ClassiCutCustoms

You are correct..... They are messy to make. I have already been through this box and cleaned them up.... They are covered in carbon dust and fibers. You should see my hands after an hour or so!

Be careful! Carbon fibers are terrible for you. I use dust extraction while I'm cutting and it took me quite a while to get my cam game good enough for minimal cleanup. For me, machining plastic had zero learning curve compared to composites. I'm no pro but if you ever have a question that you could use another point of view on, I'm just a pm away!

[ClassiCutCustoms]

Originally Posted by nigels_world

Be careful!..... . For me, machining plastic had zero learning curve compared to composites. I'm no pro but if you ever have a question that you could use another point of view on, I'm just a pm away!

Thanks fella...... I am being careful with it. I promised I would not mess with it but that's not happening. I have the machine in a box to help contain the mess and I have a good Festool vacuum with multiple filters of HePA quality. I use a long wand to follow the bit and catch most of it. I will keep you in mind..... I have a few things to learn still. There is a good forum that I am drawing from as well on CNC cutting process.

[ClassiCutCustoms]

Originally Posted by boosted4lyf

Very cool chassis man, but that name is f#cking w/my head.

Will you be designing a super chassis? Maybe the Irish wolfhound/mastiff

No plans for one at the moment..... But I have a good friend who is into Mastiffs..... Plenty of possibilities for future growth

[Farmer]

Very cool man and insane price I'm sure there will be a lot of these being purchased!!!
Later,
Farmer

[ClassiCutCustoms]

Three more from the first batch still available and ready to ship.....

Sent from my XT912 using Tapatalk 4

[bigstu]

My chassis arrived today.
Excellent machine work.
Thank you much. Keep your eyes open for a build thread in the near future.
Have to decide which scaler goes on the chopping block so I can go broke with Mr. Jonrobholmes...

[obebaldone1]

3 left!!! Dang they are going quick Barry.

[ClassiCutCustoms]

Well...... As you can tell from the 6+ build threads I have been sending a bunch out in the last week. I will keep the sale going until I fill 10 orders at my promised price of $99.00.