07-08-2014, 05:51 AM | #261 |
Rock Crawler Join Date: Dec 2011 Location: Virginia
Posts: 552
| Re: IFS kit for Wraith |
Sponsored Links | |
07-08-2014, 06:59 AM | #262 |
Rock Crawler Join Date: Dec 2011 Location: Virginia
Posts: 552
| Re: IFS kit for Wraith Spools: after sitting down and doing some research i think i finally got my head around how to sell these spools: 5mm spool long: works with Traxxas scale CVDs pn #TRA6851R and MIP MIP X-Duty Traxxas kit MIP11110. 5mm spool stubby: works with custom built CVDs consisting of pn #MIP10133 plus a set of long bones and hardware from SCX10, Wraith, etc. (these are very common) male pn# MIP8110 and female bone #MIP8111 6mm spool long: requires drilling your ring gear and drive hubs typically done in a lathe to ensure accuracy. works with Traxxas scale CVDs pn #TRA6851R and MIP MIP X-Duty Traxxas kit MIP11110. 6mm spool stubby: requires drilling your ring gear and drive hubs typically done in a lathe to ensure accuracy. works with custom built CVDs consisting of pn #MIP10133 plus a set of longer bones and hardware from SCX10, Wraith, etc. male pn# MIP8110 and female bone #MIP8111 in all cases when using the traxxas shafts, MIPs or other, we highly recommend machining this surface of the CVD axle as shown: don't have the tools necessary to modify these parts or are too busy? don't worry, we can help. email sales@bluemonkeyrc.com. turnkey solutions (pre-machined kits) coming soon |
07-08-2014, 08:10 AM | #263 |
RCC Addict Join Date: Jun 2006 Location: IN THE PIT !!
Posts: 1,039
| Re: IFS kit for Wraith BM/RC - matt ! side note ! MIP makes the same front stubby shaft with a keyed shaft (no pin hole) part #MIP10133 I've broke a few front stubby shafts (with the hex pin hole) on my bad monkey rig. changed to this stubby shaft in the front - haven't broke one yet ! this is a lot tougher shaft - with no thru hole - & is another good option ! but - it will still need to be modified ! now we have all kinds of drive shafts we can use now !! |
07-08-2014, 08:13 AM | #264 |
Newbie Join Date: Jun 2014 Location: durham
Posts: 11
| I have tried, didn't work. The hood didn't clear and the k3 was hitting the front bumper supports. I will figure it out eventually.
|
07-08-2014, 10:32 AM | #265 | |
Rock Crawler Join Date: Dec 2011 Location: Virginia
Posts: 552
| Re: IFS kit for Wraith Quote:
i have a few of those MIP keyed axles i was planning on machining them to sell for this mod and offering a core charge for folks who already have them. | |
07-08-2014, 07:08 PM | #266 | |
I wanna be Dave Join Date: Feb 2007 Location: BFE, NV
Posts: 2,324
| Re: IFS kit for Wraith Quote:
| |
07-09-2014, 04:33 AM | #267 |
RCC Addict Join Date: Dec 2009 Location: Newcastle, Australia
Posts: 1,784
|
What sort of steering are you guys getting?? Cheers Dan |
07-09-2014, 09:27 AM | #268 |
Newbie Join Date: Jun 2014 Location: durham
Posts: 11
|
I hit lock to lock, but the outside tire could use a little more.
|
07-14-2014, 01:22 AM | #269 |
Rock Stacker Join Date: Dec 2011 Location: Apache Junction
Posts: 96
|
Hey Matt I'd like a set of those machined down keyed axles. If you could me down for a set of those whenever you start making those up please that would be awesome!
|
07-14-2014, 10:26 AM | #270 |
Rock Crawler Join Date: Dec 2011 Location: Virginia
Posts: 552
| Re: IFS kit for Wraith
no problem. i'll see if we can get those done tonight.
|
07-15-2014, 05:15 AM | #271 |
Rock Crawler Join Date: Dec 2011 Location: Virginia
Posts: 552
| Re: IFS kit for Wraith
done.
|
07-17-2014, 03:41 PM | #272 |
Rock Stacker Join Date: Dec 2011 Location: Apache Junction
Posts: 96
|
E mailed you yesterday
|
08-06-2014, 09:56 PM | #273 |
I wanna be Dave Join Date: Aug 2011 Location: Burque
Posts: 3,805
| Re: IFS kit for Wraith
Email sent regarding locker |
08-11-2014, 08:10 AM | #274 |
Rock Crawler Join Date: Dec 2011 Location: Virginia
Posts: 552
| Re: IFS kit for Wraith
Spools are taking forever. Sorry I keep getting bumped for larger customers. The latest I heard was they will be starting 8/18 but i'm trying my best to improve on that. Since I can't do much but bitch and wait, I got to thinking and was curious if you guys would like rear axle shafts to match the fronts? it wouldn't be a big deal to make a few sets of 300m keyed rear shafts. I could do them offset and centered to fit aftermarket housings. |
09-16-2014, 02:43 PM | #275 |
Rock Crawler Join Date: Jul 2010 Location: Great Britain
Posts: 767
| Re: IFS kit for Wraith
What are the benefits with an ifs wraith ? Sorry for my noob ness . I'm a little bored with my wraith it doesn't see half the action my scx does .
|
09-18-2014, 10:08 AM | #276 |
Rock Crawler Join Date: Dec 2011 Location: Virginia
Posts: 552
| Re: IFS kit for Wraith
besides U4 scaleness, independent suspensions tend to perform better at higher speeds.
|
09-18-2014, 10:11 AM | #277 |
Quarry Creeper Join Date: Jun 2008 Location: LaPorte
Posts: 417
| Re: IFS kit for Wraith
Here's my Mattzilla, BMRC IFS SQUATCHZILLA. ... |
09-19-2014, 07:56 AM | #278 |
Newbie Join Date: Jun 2014 Location: durham
Posts: 11
| Re: IFS kit for Wraith Mine did well at axialfest this year. |
11-20-2014, 02:03 AM | #279 | |
Rock Crawler Join Date: Jan 2014 Location: Frog Lake AB, Canada
Posts: 696
| Re: IFS kit for Wraith Quote:
Hey guy, I just received my IFRS kit, and I gotta ask how hard was this thing to build, I'm about 60% done but I can't figure out where the cone washers go, or what the 2 extra aluminum spacers are for, they are the same size are the spacers for the bulkheads, any help guys, guys!? | |
11-11-2015, 08:13 PM | #280 |
Quarry Creeper Join Date: Mar 2013 Location: Hampton Roads
Posts: 265
| Re: IFS kit for Wraith
Do you have any plans for making a 3mm shaft version? I could use some to lock my EXO transmission and use stock axial driveshafts
|
IFS kit for Wraith - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Is a IFS Wraith possible? | BigSki | Axial Wraith | 5 | 08-08-2012 08:21 PM |
IFS/Wraith TW | Unfadingpyro | General Scale Talk | 13 | 12-13-2011 11:57 AM |
| |