Go Back   RCCrawler Forums > Vendors > Vendors Market > Chassis and Suspension
Loading

Notices

Thread: Irie Products Twin Hammer ball bearing steering & upright shock tower

Reply
 
LinkBack Thread Tools Display Modes
Old 04-05-2014, 03:52 PM   #1
Rock Crawler
 
Join Date: Jul 2005
Location: Playing with toys with my son's
Posts: 616
Default Irie Products Twin Hammer ball bearing steering & upright shock tower







Irie's Twin hammer ball bearing bell crank steering & upright shock tower.



All parts 6061 T6 aluminum
Each bellcrank rides on two precision ball bearings for a no slop no maintenance steering
Shock tower is designed for G-made 85mm XD Piggyback shocks with no internal limiter or external bump stop to take advantage of the full travel of the shock
Geometry of linkage has been 3D modeled to have as little bumpsteer as possible, almost not measurable
Full kit $65.00 dollars shipped, Top plate and BB steering only $55 shipped 50 states


What is included?
6061 Top Plate and steering arms riding on ball bearings, assembled
Composite Shock tower
Center link consisting of two ball ends and a turnbuckle
2-M3x25mm screws, for the tie rods to bellcrank
2-M3x20mm screws, for the bellcrank arms
2-M3x14mm screws, for mounting F of top plate / F of shock tower
2-M3x12mm screws, for mounting R of top plate
2-M3x6mm screws, for mounting R of shock tower to top plate
4-M3 nylon lock nuts

For the upper shock mount reuse the factory cantilever posts
Recommended servo horn part numbers:
TLR1555 for 23T
TLR1556 for 24T
TLR1557 for 25T

Irie's GCM Tower Steering kit
$40 shipped 50 states




Included in kit
Steering arms made from 6061 riding on ball bearing two per arm
2-6061 stand offs
2-M3x22mm screws
2-M3x25mm screws
4-M3 Nylock nuts
2-M3 Large washers
2-Offset ball ends
1-Center link

Here is an install video that GCM was nice enough to do. THANK YOU



Irie's Race Prepped Twin Hammers CVD Axles
$45 Shipped 50 states



Axles are cryoed for strength
then reassembled with 4037 chromoly cross pin
and lubed with molybdenum disulfide.
All together it makes a smooth running and pretty bomb proof axle.
Recommend Vaterra HD outdrives to go with the axle's part #VTR232062
Anyone who purchased axles on or before 9/7/2014 receives 1 Free rebuild if you pay shipping. Just to say thanks


Irie open rear diff axles. $25.00


Also can do complete setup rear differentials. PM if interested

Irie Products Wheel Bearing Kit $20.00 shipped 50 states



This kit covers all wheel bearings needed for the Twin Hammers, front and rear.
These bearings are precision quality rubber sealed bearings made in the U.S.A. not overseas.
Includes
2: 6mm x 12mm
6: 5mm x 10mm



For Questions or comments IRIE Products Or PM me for fastest response

I use PayPal invoices for payment
PM for stock status

Shipping

Shipping is included in the price if shipped to the 50 states

For Canada add $5.00 tracking included

International shipping $13.50

I will not cover lost or damaged with international shipping





More Products to come

Last edited by Sr.Irie; 10-03-2016 at 01:28 PM.
Sr.Irie is offline   Reply With Quote
Sponsored Links
Old 04-06-2014, 07:39 AM   #2
Rock Crawler
 
Join Date: Sep 2010
Location: Little Rock, AR
Posts: 596
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

Are the kits ready to go or is there any wait time? Also, does it include the drag link between the bellcranks?
Rootar is offline   Reply With Quote
Old 04-06-2014, 02:12 PM   #3
Rock Crawler
 
Join Date: Jul 2005
Location: Playing with toys with my son's
Posts: 616
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

Yes they are ready to ship and they come with all hardware to install.
Sr.Irie is offline   Reply With Quote
Old 04-06-2014, 04:31 PM   #4
Rock Crawler
 
Pockets70's Avatar
 
Join Date: May 2013
Location: Rancho Cucamonga
Posts: 665
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

Done deal. Awesome setup and will be thoroughly race tested starting with the Summer Season of U4RC.
Pockets70 is offline   Reply With Quote
Old 04-07-2014, 08:03 AM   #5
Quarry Creeper
 
Join Date: Mar 2013
Location: Feather river canyon
Posts: 487
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

think i might give this setup a try, i like the way it looks great job, even though i just recently installed the traxxas steering and blue monkey upright shock tower..irie..!
Rastaman is offline   Reply With Quote
Old 04-07-2014, 08:23 AM   #6
20K Club
 
Harley's Avatar
 
Join Date: Jul 2004
Location: Sending illegals home one Hayabusa at a time.
Posts: 22,981
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

Nice execution, I'll have to keep this in mind.
Harley is offline   Reply With Quote
Old 04-16-2014, 12:56 PM   #7
Rock Crawler
 
Join Date: Jul 2005
Location: Playing with toys with my son's
Posts: 616
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

Quote:
Originally Posted by Harley View Post
Nice execution, I'll have to keep this in mind.
Thank you
Sr.Irie is offline   Reply With Quote
Old 05-04-2014, 10:23 AM   #8
Newbie
 
Join Date: May 2014
Location: Jersey City
Posts: 1
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

Very interested in this, would there be space under the hood for a battery with this setup? if so, what size battery would fit?
shimal is offline   Reply With Quote
Old 05-05-2014, 12:13 PM   #9
Rock Crawler
 
Join Date: Jul 2005
Location: Playing with toys with my son's
Posts: 616
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

Quote:
Originally Posted by shimal View Post
Very interested in this, would there be space under the hood for a battery with this setup? if so, what size battery would fit?
The stock little battery will fit up front. I run the shorty batteries like the stock upgrade battery and I don't think they would fit right. If you check out the thread in the twin hammers section IRIE Products there are some more pictures.
Sr.Irie is offline   Reply With Quote
Old 05-14-2014, 05:12 PM   #10
Rock Stacker
 
Join Date: Nov 2011
Location: weswt branch mi
Posts: 63
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

i would like to buy this. how do i order 1
nos nut is offline   Reply With Quote
Old 05-27-2014, 06:56 PM   #11
Rock Crawler
 
Join Date: Jul 2005
Location: Playing with toys with my son's
Posts: 616
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

For anyone I may have missed the kits are back in stock
To order PM me

Sr.Irie is offline   Reply With Quote
Old 06-26-2014, 12:29 PM   #12
I wanna be Dave
 
Natedog's Avatar
 
Join Date: Jan 2006
Location: Corruptifornia
Posts: 12,107
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

Great looking well thought out kit built for heavy duty.
Natedog is offline   Reply With Quote
Old 07-01-2014, 07:31 PM   #13
Rock Crawler
 
Join Date: Apr 2009
Location: NE Ohio
Posts: 794
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

I had a few questions regarding the gcm tower kit you offer, 1. Is it in stock, 2. Is it a direct bolt on to their front tower plate, or does it require modification?

--Dan

Last edited by sickcivic95; 07-01-2014 at 07:31 PM. Reason: Spell
sickcivic95 is offline   Reply With Quote
Old 07-14-2014, 10:03 AM   #14
Rock Crawler
 
Join Date: Jul 2005
Location: Playing with toys with my son's
Posts: 616
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

Quote:
Originally Posted by sickcivic95 View Post
I had a few questions regarding the gcm tower kit you offer, 1. Is it in stock, 2. Is it a direct bolt on to their front tower plate, or does it require modification?

--Dan
1:Yes I try to keep a few on hand I do run out from time to time
2:No it does not require modification to the GCM plate

Here is a link to a quick TM of install, check post #120
Sr.Irie is offline   Reply With Quote
Old 07-26-2014, 02:33 AM   #15
Newbie
 
Join Date: Jul 2014
Location: Sunshine Coast
Posts: 3
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

I live in Australia and want the steering and upright shock mount kit you sell for $65, how much postage will I have to pay? And as a newbie how do I go about making a purchase?
Miksta is offline   Reply With Quote
Old 08-16-2014, 01:45 PM   #16
Newbie
 
Join Date: Dec 2011
Location: Williamston, MI
Posts: 4
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

Are there any GCM shock tower compatible steering bellcranks available at this time? Thanks! Pm sent.
Doozie32 is offline   Reply With Quote
Old 08-30-2014, 09:47 AM   #17
Newbie
 
Join Date: Aug 2014
Location: England
Posts: 1
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

Quote:
Originally Posted by Sr.Irie View Post





Irie's Twin hammer ball bearing bell crank steering & upright shock tower.
All parts 6061 T6 aluminum
Each bellcrank rides on two precision ball bearings for a no slop no maintenance steering
Shock tower is designed for G-made 85mm XD Piggyback shocks with no internal limiter or external bump stop to take advantage of the full travel of the shock
Geometry of linkage has been 3D modeled to have as little bumpsteer as possible, almost not measurable
Full kit $65.00 dollars shipped, Top plate and BB steering only $55 shipped 50 states


What is included?
6061 Top Plate and steering arms riding on ball bearings, assembled
6061 Shock tower, you must bolt it on
Center link consisting of two ball ends and a turnbuckle
2-M3x25mm screws, for the tie rods to bellcrank
2-M3x20mm screws, for the bellcrank arms
2-M3x14mm screws, for mounting F of top plate / F of shock tower
2-M3x12mm screws, for mounting R of top plate
2-M3x6mm screws, for mounting R of shock tower to top plate
4-M3 nylon lock nuts

For the upper shock mount reuse the factory cantilever posts
Recommended servo horn part numbers:
TLR1555 for 23T
TLR1556 for 24T
TLR1557 for 25T

Irie's GCM Tower Steering kit
$40 shipped 50 states


Included in kit
Steering arms made from 6061 riding on ball bearing two per arm
2-6061 stand offs
2-M3x22mm screws
2-M3x25mm screws
4-M3 Nylock nuts
2-M3 Large washers
2-Offset ball ends
1-Center link

Irie's Race Prepped Twin Hammers CVD Axles
$45 Shipped 50 states




Axles are cryoed for strength then fully polished for smooth operation
then reassembled with 4037 chromoly cross pin
and lubed with molybdenum disulfide.
All together it makes a smooth running and pretty bomb proof axle.
Recommend Vaterra HD outdrives to go with the axle's part #VTR232062

For Questions or comments IRIE Products Or PM me for fastest response

Payment can be made through PayPal PM for PayPal instructions and stock status
I will ship outside the USA at buyer's expense



More Products to come
AndyCamuk is offline   Reply With Quote
Old 11-08-2014, 09:15 PM   #18
Newbie
 
Join Date: Sep 2014
Location: columbus
Posts: 2
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

Quote:
Originally Posted by Sr.Irie View Post
For anyone I may have missed the kits are back in stock
To order PM me

Sr irie. I m in need of the steering mod. I have the gcm upright shock kit and need your product. To complete my build. Please
geargrinder is offline   Reply With Quote
Old 12-14-2014, 05:54 PM   #19
Newbie
 
Join Date: Mar 2013
Location: los angeles c
Posts: 38
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

Anyone have any idea when the full kit willl be back in stock? Also if any has a sttering kit they want to sell shoot me a pm.
cooperDG123 is offline   Reply With Quote
Old 12-24-2014, 05:00 AM   #20
Rock Crawler
 
Join Date: Mar 2014
Location: Yorkville
Posts: 745
Default Re: Irie Products Twin Hammer ball bearing steering & upright shock tower

this stuff still bein made or no? would like to pick up a full kit.
gunder463 is offline   Reply With Quote
Reply



Irie Products Twin Hammer ball bearing steering & upright shock tower - Similar Threads
Thread Thread Starter Forum Replies Last Post
Vanquish Products Shock Tower Preview jeeper_05 Non Crawler RC's 1 09-18-2012 11:08 PM
Ball Bearing steering for CC01 with Hilift parts spankrjs Tamiya XC/CC01 15 09-20-2009 02:12 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 06:00 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com