|
~TSS~ SCX10 Smooth Skids TSS SCX10 Smooth Skid Increases ground clearance without raising truck or CG Slippery Delrin slides over rocks instead of grabbing like stock plastic skid Helps eliminate high centering Features beveled front and rear edges Works with stock Axial rod ends or Traxxas Revo rod ends Bolts right up to you SCX10 chassis rails The Ultimate SCX10 Performance Skid! Made in the USA Requires (4) M3 x 30-35mm screws (not included) $29 + Shipping |
Re: ~TSS~ SCX10 Smooth Skids haha, sounds like you made what I asked about a few months back. "thumbsup" I will have to get one once I got the extra cash. |
Re: ~TSS~ SCX10 Smooth Skids I like this! gonna have to order one soon as payday rolls around! Any chance of getting one of these made for a wraith? |
Re: ~TSS~ SCX10 Smooth Skids I could do that."thumbsup" |
Re: ~TSS~ SCX10 Smooth Skids How would one raise the upper links? |
Re: ~TSS~ SCX10 Smooth Skids ive got the answer to that and many others coming in about 2 weeks. :twisted: in the mean time you could run chris the battery man, or monkey racers upper link risers"thumbsup" the stock axial SCX chassis setup needs them anyway for proper anti-squat |
Re: ~TSS~ SCX10 Smooth Skids Wow these are going quick:shock: Everyone that ordered last night, and today your skids have shipped"thumbsup" Thanks for the support! |
Re: ~TSS~ SCX10 Smooth Skids Just ordered. Thanks. Can't wait to get this skid. |
Re: ~TSS~ SCX10 Smooth Skids Pretty slick idea... |
If you plan to incorporate upper link risers in the future that would be sweet! Thomas |
Re: ~TSS~ SCX10 Smooth Skids this is phase 1 of a 2 part project ;-) "thumbsup" |
Re: ~TSS~ SCX10 Smooth Skids Got mine - I was just about to start hackin some derlin so this will save me some time thanks! |
Re: ~TSS~ SCX10 Smooth Skids Quote:
All US orders from last night and today, including yours have shipped"thumbsup" International orders will ship Monday8) Thanks! -Cory |
Re: ~TSS~ SCX10 Smooth Skids order placed |
Re: ~TSS~ SCX10 Smooth Skids So we will just need to either buy or make a set of upper link risers to make this work correct? |
Re: ~TSS~ SCX10 Smooth Skids technically no. it will work without them."thumbsup" but for the best possible geometry yes they will help. I have something coming out in two weeks to address this ;-) |
I like it a lot! I second the vote for one for the Wraith though! |
Re: ~TSS~ SCX10 Smooth Skids PM sent! |
~TSS~ SCX10 Smooth Skids I used rear upper link risers, cause I had them and wanted different rear geo. Fronts work without them. I used a small 2-3mm spacer, to get it away from the inside of the frame rail, since I am using bulkier revo ends. Front on left. Not using the bent/angled axial ends. VP Ti with 1/4' AL tubing on lowers to reduce snagging. http://img.tapatalk.com/d/14/05/06/3y7y4u6u.jpg I am doing a new build with a decent amount of uptravel, so my frame is notched and cut, etc. So, ignore that up front. Bent VP Ti Uppers and sleeved VP Ti lowers as well. http://img.tapatalk.com/d/14/05/06/rutahe2a.jpg Extreme uptravel i was going for. Lol. Will get tuned out a little. http://img.tapatalk.com/d/14/05/06/za7ugy5u.jpg View from above on upper fronts. http://img.tapatalk.com/d/14/05/06/9a5u6eza.jpg |
Re: ~TSS~ SCX10 Smooth Skids great pics and awesome rig as usual Shane! the Smooth Skid is perfect for that project. Thanks! |
| All times are GMT -6. The time now is 05:20 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com