|
| LinkBack | Thread Tools | Display Modes |
04-29-2014, 06:14 PM | #1 |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
| ~TSS~ SCX10 Smooth Skids TSS SCX10 Smooth Skid Increases ground clearance without raising truck or CG Slippery Delrin slides over rocks instead of grabbing like stock plastic skid Helps eliminate high centering Features beveled front and rear edges Works with stock Axial rod ends or Traxxas Revo rod ends Bolts right up to you SCX10 chassis rails The Ultimate SCX10 Performance Skid! Made in the USA Requires (4) M3 x 30-35mm screws (not included) Available Here! $29 + Shipping |
Sponsored Links | |
04-29-2014, 06:24 PM | #2 |
I wanna be Dave Join Date: Jul 2013 Location: Minneapolis
Posts: 5,202
| Re: ~TSS~ SCX10 Smooth Skids
haha, sounds like you made what I asked about a few months back. I will have to get one once I got the extra cash.
|
04-29-2014, 06:45 PM | #3 |
I wanna be Dave Join Date: Feb 2013 Location: NW Indiana
Posts: 3,196
| Re: ~TSS~ SCX10 Smooth Skids
I like this! gonna have to order one soon as payday rolls around! Any chance of getting one of these made for a wraith?
|
04-29-2014, 07:34 PM | #4 |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
| Re: ~TSS~ SCX10 Smooth Skids
I could do that. |
04-29-2014, 08:11 PM | #5 |
I wanna be Dave Join Date: May 2006 Location: FOUR 8 OH
Posts: 4,913
| Re: ~TSS~ SCX10 Smooth Skids
How would one raise the upper links?
Last edited by 2JSC; 04-29-2014 at 09:14 PM. |
04-29-2014, 08:18 PM | #6 |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
| Re: ~TSS~ SCX10 Smooth Skids
ive got the answer to that and many others coming in about 2 weeks. in the mean time you could run chris the battery man, or monkey racers upper link risers the stock axial SCX chassis setup needs them anyway for proper anti-squat Last edited by STANG KILLA SS; 04-29-2014 at 08:24 PM. |
04-30-2014, 02:23 PM | #7 |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
| Re: ~TSS~ SCX10 Smooth Skids
Wow these are going quick Everyone that ordered last night, and today your skids have shipped Thanks for the support! |
04-30-2014, 02:52 PM | #8 |
I wanna be Dave Join Date: Oct 2007 Location: Castle Rock, WA
Posts: 8,785
| Re: ~TSS~ SCX10 Smooth Skids
Just ordered. Thanks. Can't wait to get this skid.
|
04-30-2014, 04:16 PM | #9 |
Suck it up! Join Date: Mar 2008 Location: Arkansas
Posts: 11,652
| Re: ~TSS~ SCX10 Smooth Skids
Pretty slick idea...
|
04-30-2014, 04:25 PM | #10 |
Quarry Creeper Join Date: Aug 2007 Location: Bowling Green KY
Posts: 448
|
If you plan to incorporate upper link risers in the future that would be sweet! Thomas |
04-30-2014, 04:33 PM | #11 |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
| Re: ~TSS~ SCX10 Smooth Skids
this is phase 1 of a 2 part project |
05-02-2014, 07:37 AM | #12 |
I wanna be Dave Join Date: Jan 2004 Location: Austin Texas
Posts: 3,866
| Re: ~TSS~ SCX10 Smooth Skids
Got mine - I was just about to start hackin some derlin so this will save me some time thanks!
|
05-02-2014, 01:29 PM | #13 |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
| Re: ~TSS~ SCX10 Smooth Skids |
05-03-2014, 06:13 AM | #14 |
Newbie Join Date: Jun 2009 Location: Australia
Posts: 33
| Re: ~TSS~ SCX10 Smooth Skids
order placed
|
05-05-2014, 09:00 AM | #15 |
Rock Crawler Join Date: Jul 2005 Location: Spartanburg
Posts: 860
| Re: ~TSS~ SCX10 Smooth Skids
So we will just need to either buy or make a set of upper link risers to make this work correct?
|
05-05-2014, 01:17 PM | #16 |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
| Re: ~TSS~ SCX10 Smooth Skids
technically no. it will work without them. but for the best possible geometry yes they will help. I have something coming out in two weeks to address this Last edited by STANG KILLA SS; 05-05-2014 at 01:30 PM. |
05-05-2014, 01:35 PM | #17 |
Quarry Creeper Join Date: Jan 2014 Location: Springfield
Posts: 494
|
I like it a lot! I second the vote for one for the Wraith though!
|
05-05-2014, 01:38 PM | #18 |
Rock Crawler Join Date: Jul 2005 Location: Spartanburg
Posts: 860
| Re: ~TSS~ SCX10 Smooth Skids
PM sent!
|
05-05-2014, 01:51 PM | #19 |
I wanna be Dave Join Date: Oct 2007 Location: Castle Rock, WA
Posts: 8,785
| ~TSS~ SCX10 Smooth Skids
I used rear upper link risers, cause I had them and wanted different rear geo. Fronts work without them. I used a small 2-3mm spacer, to get it away from the inside of the frame rail, since I am using bulkier revo ends. Front on left. Not using the bent/angled axial ends. VP Ti with 1/4' AL tubing on lowers to reduce snagging. I am doing a new build with a decent amount of uptravel, so my frame is notched and cut, etc. So, ignore that up front. Bent VP Ti Uppers and sleeved VP Ti lowers as well. Extreme uptravel i was going for. Lol. Will get tuned out a little. View from above on upper fronts. Last edited by Szczerba; 05-05-2014 at 01:56 PM. |
05-05-2014, 02:02 PM | #20 |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
| Re: ~TSS~ SCX10 Smooth Skids
great pics and awesome rig as usual Shane! the Smooth Skid is perfect for that project. Thanks! |
~TSS~ SCX10 Smooth Skids - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
skids | sycchevelle | HPI Wheely King | 3 | 09-03-2010 11:16 PM |
New take on old skids | callaway | General Crawlers | 10 | 01-26-2007 03:33 PM |
| |