RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Chassis and Suspension (http://www.rccrawler.com/forum/chassis-suspension/)
-   -   Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2 (http://www.rccrawler.com/forum/chassis-suspension/581575-comp-spec-front-side-tranny-motor-servo-winch-mount-set-scx10-2-a.html)

The Crawl Space 03-14-2017 12:46 PM

Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
4 Attachment(s)
Get the front end of your SCX10 2 rig squared away with this all in one mount set.

Attachment 356668

Set includes transmission bracket, reverse motor mount, chassis mount steering servo and servo winch brackets.

Face the transmission and motor in the right direction for proper weight distribution and clearance for that 3D interior.

Attachment 356669

Attachment 356670

Attachment 356671

All pieces are 3D printed in strong, impact resistant and paintable grey PLA plastic.

$29.00 shipped CONUS via USPS one rate priority box.

-Paypal payment for "goods and services" (absolutely no gifts) to thecrawlspaceco@yahoo.com

It is your responsibility that your mailing address is correct for delivery.
Be sure to include in the "Notes" your name or screen name (if applicable) and what you are paying for.

The Crawl Space 09-12-2017 11:05 AM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
5 Attachment(s)
Some more pics of how the bracket pieces are installed ion the truck.
There printed in green to make it easier to see, all production pieces are printed in black.

Attachment 364399

Attachment 364400

Attachment 364401

Attachment 364402

Attachment 364403

Jeepkid 02-07-2018 05:22 PM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
More info on that motor reversing mount? How does it hold up to overall abuse?

Sent from my SM-G930P using Tapatalk

The Crawl Space 02-08-2018 04:13 PM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
Quote:

Originally Posted by Jeepkid (Post 5798311)
More info on that motor reversing mount? How does it hold up to overall abuse?

Sent from my SM-G930P using Tapatalk

We've been running these for at least a year with no issues. We run brushed mainly but people with brushless haven't reported any breakage

Jeepkid 02-08-2018 04:16 PM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
Quote:

Originally Posted by The Crawl Space (Post 5798692)
We've been running these for at least a year with no issues. We run brushed mainly but people with brushless haven't reported any breakage

Okay, I habe the trans flip kit already. Would you be willing to sell just the motor mount?

Sent from my SM-G930P using Tapatalk

The Crawl Space 02-08-2018 05:41 PM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
Quote:

Originally Posted by Jeepkid (Post 5798694)
Okay, I habe the trans flip kit already. Would you be willing to sell just the motor mount?

Sent from my SM-G930P using Tapatalk

PM sent "thumbsup"

dragon6 08-15-2018 04:24 AM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
What do you think of the of the COG is it better with the crawling and all the climbs ?
I want to order a set and wonder about the motor reverse adapter, do you ned any special screws?
The thing is it looks like a toyzuki almost with the motor so close to the front, and that is to a very reduced price :)

You have any vidoes or som more info would appreciate that alot :D


And super good joob on the print, this is the first in the world i have seen!:)

tapped-out 10-21-2018 12:30 PM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
Hello I just ordered the motor flip mount by itself thanks.
Question for you do i need to change stock spur and pinion gear or just use stock gearing (looks like stock spur)? I also e-mailed thecrawlspace.com.

Sent from my SM-J727VPP using Tapatalk

revin9k 10-28-2018 05:39 PM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
Will you guys have more flip kits in stock soon? I would really like one. Thanks

Sent from my SM-G965U using Tapatalk

tapped-out 10-28-2018 06:15 PM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
Just sharing a pic of my motor flip using the crawl space motor adapter only..

I already had the Bowhouse transmission flipped cross member in my scx10 ii rig. So I just ordered the motor forward adapter from thecrawlspace.com.

In order for me to mount my motor using the mixed matched parts (bowhouse with Crawlspace) I had to dremel top of the C-channel on the scx10 frame next to motor (pic below).

I'm thinking the crawlspace cross member is probably a hair taller than the Bowhouse trans cross member.
Either way I managed to flip my motor forward I'm very happy with this motor flip adapter. Thanks to crawlspace.

If I would have know ahead of time, I'd have to dremel my chassis I would have bought the complete kit from the crawl space.

On a positive note my motor sits a little lower? :)https://uploads.tapatalk-cdn.com/201...7c14c9937b.jpghttps://uploads.tapatalk-cdn.com/201...a37946f0c7.jpghttps://uploads.tapatalk-cdn.com/201...42c9d461f7.jpg

Sent from my SM-J727VPP using Tapatalk

The Crawl Space 11-02-2018 02:28 PM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
Quote:

Originally Posted by revin9k (Post 5879989)
Will you guys have more flip kits in stock soon? I would really like one. Thanks

Sent from my SM-G965U using Tapatalk

I should have some more in a week or so. I'll put you on the list and PM you once I have them in hand "thumbsup"

revin9k 11-18-2018 06:57 PM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
I can confirm that the motor mount will clear a 60t 32p spur gear without modifications [emoji3]https://uploads.tapatalk-cdn.com/201...98ad4af3c7.jpg

Sent from my SM-G965U using Tapatalk

revin9k 11-18-2018 07:33 PM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
I am curious what length and type of screws you guys are using for the motor? Longest I have is 25mm. Looks like I'll need a 30mm x 2.5 button head?

Sent from my SM-G965U using Tapatalk

DRTMI 11-18-2018 08:02 PM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
Quote:

Originally Posted by revin9k (Post 5885391)
I am curious what length and type of screws you guys are using for the motor? Longest I have is 25mm. Looks like I'll need a 30mm x 2.5 button head?

Sent from my SM-G965U using Tapatalk

Motor screws are usually 3mm not 2.5mm. Can't help with the length.

The Crawl Space 11-20-2018 03:45 PM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
Quote:

Originally Posted by revin9k (Post 5885391)
I am curious what length and type of screws you guys are using for the motor? Longest I have is 25mm. Looks like I'll need a 30mm x 2.5 button head?

Sent from my SM-G965U using Tapatalk

M3 x 30mm would be best "thumbsup"

The Crawl Space 11-20-2018 04:08 PM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
1 Attachment(s)
Quick updated pic without the running gear installed "thumbsup"Attachment 376887

revin9k 11-20-2018 04:30 PM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
Quote:

Originally Posted by The Crawl Space (Post 5885834)
Quick updated pic without the running gear installed "thumbsup"Attachment 376887

Thanks dude that's exactly what I needed to see [emoji16]

Sent from my SM-G965U using Tapatalk

dragon6 03-08-2019 04:51 AM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
Do I need to dremel the rails or is my brused motor to big?
because i cant get i to fit. And yeas i have mixed parts for the moment.
The Bowhouse transmission flipped cross member with thecrawlerspace Motor adapter. Or should i get it to fit with both thecrawlerspace parts and with no need of using dremel.?

tapped-out 03-08-2019 09:50 AM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
Quote:

Originally Posted by dragon6 (Post 5916321)
Do I need to dremel the rails or is my brused motor to big?
because i cant get i to fit. And yeas i have mixed parts for the moment.
The Bowhouse transmission flipped cross member with thecrawlerspace Motor adapter. Or should i get it to fit with both thecrawlerspace parts and with no need of using dremel.?


Read post #10 unless you have a 500 or 400 hh motor at least when I'd did this mod I had to grind upper part of C-channel of chassis.
Hasn't been an issue for me plus my motor sit lower with the bowhouse cross member.

dragon6 03-11-2019 05:45 AM

Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2
 
Tapped-out:

Can you tell me a bit of you experince with this adapter mod?
How does the truck run. How does it handle with the COG in mind.

Whats the pros and cons?

I wounder if is big diffrent run with flipped trans only and a 4 link and servo on axle or go with front mounted motor and servo on chassi(3link).


All times are GMT -6. The time now is 10:02 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com