Go Back   RCCrawler Forums > Vendors > Vendors Market > Chassis and Suspension
Loading

Notices

Thread: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

Reply
 
LinkBack Thread Tools Display Modes
Old 03-14-2017, 12:46 PM   #1
Scale Crawler Hobby Shop
 
The Crawl Space's Avatar
 
Join Date: Jan 2011
Location: Wheat Ridge
Posts: 1,308
Default Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

Get the front end of your SCX10 2 rig squared away with this all in one mount set.

Name:  1 (1).JPG
Views: 2711
Size:  138.8 KB

Set includes transmission bracket, reverse motor mount, chassis mount steering servo and servo winch brackets.

Face the transmission and motor in the right direction for proper weight distribution and clearance for that 3D interior.

Name:  1 (2).JPG
Views: 4073
Size:  129.7 KB

Name:  1 (3).JPG
Views: 2498
Size:  126.2 KB

Name:  1 (4).JPG
Views: 2529
Size:  142.2 KB

All pieces are 3D printed in strong, impact resistant and paintable grey PLA plastic.

$29.00 shipped CONUS via USPS one rate priority box.

-Paypal payment for "goods and services" (absolutely no gifts) to thecrawlspaceco@yahoo.com

It is your responsibility that your mailing address is correct for delivery.
Be sure to include in the "Notes" your name or screen name (if applicable) and what you are paying for.
The Crawl Space is offline   Reply With Quote
Sponsored Links
Old 09-12-2017, 11:05 AM   #2
Scale Crawler Hobby Shop
 
The Crawl Space's Avatar
 
Join Date: Jan 2011
Location: Wheat Ridge
Posts: 1,308
Default Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

Some more pics of how the bracket pieces are installed ion the truck.
There printed in green to make it easier to see, all production pieces are printed in black.

Name:  IMG_0061.JPG
Views: 3469
Size:  112.3 KB

Name:  IMG_0062.JPG
Views: 5880
Size:  113.2 KB

Name:  IMG_0063.JPG
Views: 3537
Size:  106.1 KB

Name:  IMG_0064.JPG
Views: 3258
Size:  135.7 KB

Name:  IMG_0065.JPG
Views: 3215
Size:  131.2 KB
The Crawl Space is offline   Reply With Quote
Old 02-07-2018, 05:22 PM   #3
I wanna be Dave
 
Join Date: Jan 2008
Location: GrandRapids, MILITIAGAN
Posts: 3,197
Default Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

More info on that motor reversing mount? How does it hold up to overall abuse?

Sent from my SM-G930P using Tapatalk
Jeepkid is offline   Reply With Quote
Old 02-08-2018, 04:13 PM   #4
Scale Crawler Hobby Shop
 
The Crawl Space's Avatar
 
Join Date: Jan 2011
Location: Wheat Ridge
Posts: 1,308
Default Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

Quote:
Originally Posted by Jeepkid View Post
More info on that motor reversing mount? How does it hold up to overall abuse?

Sent from my SM-G930P using Tapatalk
We've been running these for at least a year with no issues. We run brushed mainly but people with brushless haven't reported any breakage
The Crawl Space is offline   Reply With Quote
Old 02-08-2018, 04:16 PM   #5
I wanna be Dave
 
Join Date: Jan 2008
Location: GrandRapids, MILITIAGAN
Posts: 3,197
Default Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

Quote:
Originally Posted by The Crawl Space View Post
We've been running these for at least a year with no issues. We run brushed mainly but people with brushless haven't reported any breakage
Okay, I habe the trans flip kit already. Would you be willing to sell just the motor mount?

Sent from my SM-G930P using Tapatalk
Jeepkid is offline   Reply With Quote
Old 02-08-2018, 05:41 PM   #6
Scale Crawler Hobby Shop
 
The Crawl Space's Avatar
 
Join Date: Jan 2011
Location: Wheat Ridge
Posts: 1,308
Default Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

Quote:
Originally Posted by Jeepkid View Post
Okay, I habe the trans flip kit already. Would you be willing to sell just the motor mount?

Sent from my SM-G930P using Tapatalk
PM sent
The Crawl Space is offline   Reply With Quote
Old 08-15-2018, 04:24 AM   #7
Newbie
 
Join Date: Aug 2018
Location: Norrköping, Sweden
Posts: 4
Talking Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

What do you think of the of the COG is it better with the crawling and all the climbs ?
I want to order a set and wonder about the motor reverse adapter, do you ned any special screws?
The thing is it looks like a toyzuki almost with the motor so close to the front, and that is to a very reduced price

You have any vidoes or som more info would appreciate that alot


And super good joob on the print, this is the first in the world i have seen!
dragon6 is offline   Reply With Quote
Old 10-21-2018, 12:30 PM   #8
I wanna be Dave
 
Join Date: Dec 2006
Location: here
Posts: 2,988
Default Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

Hello I just ordered the motor flip mount by itself thanks.
Question for you do i need to change stock spur and pinion gear or just use stock gearing (looks like stock spur)? I also e-mailed thecrawlspace.com.

Sent from my SM-J727VPP using Tapatalk

Last edited by tapped-out; 10-21-2018 at 12:32 PM.
tapped-out is online now   Reply With Quote
Old 10-28-2018, 05:39 PM   #9
Quarry Creeper
 
revin9k's Avatar
 
Join Date: Nov 2006
Location: Lexington Park
Posts: 419
Default Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

Will you guys have more flip kits in stock soon? I would really like one. Thanks

Sent from my SM-G965U using Tapatalk
revin9k is offline   Reply With Quote
Old 10-28-2018, 06:15 PM   #10
I wanna be Dave
 
Join Date: Dec 2006
Location: here
Posts: 2,988
Default Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

Just sharing a pic of my motor flip using the crawl space motor adapter only..

I already had the Bowhouse transmission flipped cross member in my scx10 ii rig. So I just ordered the motor forward adapter from thecrawlspace.com.

In order for me to mount my motor using the mixed matched parts (bowhouse with Crawlspace) I had to dremel top of the C-channel on the scx10 frame next to motor (pic below).

I'm thinking the crawlspace cross member is probably a hair taller than the Bowhouse trans cross member.
Either way I managed to flip my motor forward I'm very happy with this motor flip adapter. Thanks to crawlspace.

If I would have know ahead of time, I'd have to dremel my chassis I would have bought the complete kit from the crawl space.

On a positive note my motor sits a little lower?

Sent from my SM-J727VPP using Tapatalk

Last edited by tapped-out; 11-02-2018 at 02:34 PM.
tapped-out is online now   Reply With Quote
Old 11-02-2018, 02:28 PM   #11
Scale Crawler Hobby Shop
 
The Crawl Space's Avatar
 
Join Date: Jan 2011
Location: Wheat Ridge
Posts: 1,308
Default Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

Quote:
Originally Posted by revin9k View Post
Will you guys have more flip kits in stock soon? I would really like one. Thanks

Sent from my SM-G965U using Tapatalk
I should have some more in a week or so. I'll put you on the list and PM you once I have them in hand
The Crawl Space is offline   Reply With Quote
Old 11-18-2018, 06:57 PM   #12
Quarry Creeper
 
revin9k's Avatar
 
Join Date: Nov 2006
Location: Lexington Park
Posts: 419
Default Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

I can confirm that the motor mount will clear a 60t 32p spur gear without modifications

Sent from my SM-G965U using Tapatalk
revin9k is offline   Reply With Quote
Old 11-18-2018, 07:33 PM   #13
Quarry Creeper
 
revin9k's Avatar
 
Join Date: Nov 2006
Location: Lexington Park
Posts: 419
Default Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

I am curious what length and type of screws you guys are using for the motor? Longest I have is 25mm. Looks like I'll need a 30mm x 2.5 button head?

Sent from my SM-G965U using Tapatalk
revin9k is offline   Reply With Quote
Old 11-18-2018, 08:02 PM   #14
Rock Crawler
 
Join Date: Feb 2012
Location: Michigan
Posts: 618
Default Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

Quote:
Originally Posted by revin9k View Post
I am curious what length and type of screws you guys are using for the motor? Longest I have is 25mm. Looks like I'll need a 30mm x 2.5 button head?

Sent from my SM-G965U using Tapatalk
Motor screws are usually 3mm not 2.5mm. Can't help with the length.
DRTMI is offline   Reply With Quote
Old 11-20-2018, 03:45 PM   #15
Scale Crawler Hobby Shop
 
The Crawl Space's Avatar
 
Join Date: Jan 2011
Location: Wheat Ridge
Posts: 1,308
Default Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

Quote:
Originally Posted by revin9k View Post
I am curious what length and type of screws you guys are using for the motor? Longest I have is 25mm. Looks like I'll need a 30mm x 2.5 button head?

Sent from my SM-G965U using Tapatalk
M3 x 30mm would be best
The Crawl Space is offline   Reply With Quote
Old 11-20-2018, 04:08 PM   #16
Scale Crawler Hobby Shop
 
The Crawl Space's Avatar
 
Join Date: Jan 2011
Location: Wheat Ridge
Posts: 1,308
Default Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

Quick updated pic without the running gear installed Name:  IMG_3219.jpg
Views: 970
Size:  131.6 KB
The Crawl Space is offline   Reply With Quote
Old 11-20-2018, 04:30 PM   #17
Quarry Creeper
 
revin9k's Avatar
 
Join Date: Nov 2006
Location: Lexington Park
Posts: 419
Default Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

Quote:
Originally Posted by The Crawl Space View Post
Quick updated pic without the running gear installed Attachment 376887
Thanks dude that's exactly what I needed to see

Sent from my SM-G965U using Tapatalk
revin9k is offline   Reply With Quote
Old 03-08-2019, 04:51 AM   #18
Newbie
 
Join Date: Aug 2018
Location: Norrköping, Sweden
Posts: 4
Default Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

Do I need to dremel the rails or is my brused motor to big?
because i cant get i to fit. And yeas i have mixed parts for the moment.
The Bowhouse transmission flipped cross member with thecrawlerspace Motor adapter. Or should i get it to fit with both thecrawlerspace parts and with no need of using dremel.?
dragon6 is offline   Reply With Quote
Old 03-08-2019, 09:50 AM   #19
I wanna be Dave
 
Join Date: Dec 2006
Location: here
Posts: 2,988
Default Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

Quote:
Originally Posted by dragon6 View Post
Do I need to dremel the rails or is my brused motor to big?
because i cant get i to fit. And yeas i have mixed parts for the moment.
The Bowhouse transmission flipped cross member with thecrawlerspace Motor adapter. Or should i get it to fit with both thecrawlerspace parts and with no need of using dremel.?

Read post #10 unless you have a 500 or 400 hh motor at least when I'd did this mod I had to grind upper part of C-channel of chassis.
Hasn't been an issue for me plus my motor sit lower with the bowhouse cross member.

Last edited by tapped-out; 03-08-2019 at 09:54 AM.
tapped-out is online now   Reply With Quote
Old 03-11-2019, 05:45 AM   #20
Newbie
 
Join Date: Aug 2018
Location: Norrköping, Sweden
Posts: 4
Default Re: Comp Spec Front Side Tranny/Motor/Servo/Winch mount set for SCX10 2

Tapped-out:

Can you tell me a bit of you experince with this adapter mod?
How does the truck run. How does it handle with the COG in mind.

Whats the pros and cons?

I wounder if is big diffrent run with flipped trans only and a 4 link and servo on axle or go with front mounted motor and servo on chassi(3link).
dragon6 is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 12:19 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com