|
| LinkBack | Thread Tools | Display Modes |
03-21-2008, 07:06 PM | #1 |
Quarry Creeper Join Date: Mar 2005 Location: Pleasant Grove
Posts: 204
| crawling in st. george, Utah
I spent last weekend crawling in St. George. We had some decent carnage on the 1:1 rigs including a broken trans mount, a torn sidewall on a 38" swamper, and a transfer case broken in half. The rc crawling proved to be much better this trip. rig 1: TLT axles-stock Moabs 55t lathe motor novak xrs losi xxxt trans with maxx shafts losi shocks tube chassis that remains largely unchanged since I built it in '05 Trying out the new wide angle lens----nice rig 2: clod with well worn mashers old school evx 55turn lathes pimp cane (the only clod chassis as far as I'm concerned) I've had about 6 different setups on this and the simplicity of the pimp is unbeatable. Drove into this position and over the top. As mentioned, the pimp cane works. The second picture didn't end so well other rigs were the stock micro desert truck, and the beater savage. Both of these are just fun to beat. The micro DT is so much more fun than it should be, especially when my kids are chasing it in the dirt . Last edited by cuban b; 03-21-2008 at 07:16 PM. |
Sponsored Links | |
04-09-2009, 07:00 PM | #2 |
Pebble Pounder Join Date: Mar 2009 Location: St. George
Posts: 129
|
where do you crawl at?
|
04-10-2009, 08:25 AM | #3 |
I wanna be Dave Join Date: Apr 2005 Location: Vegas
Posts: 7,172
|
Kind of looks like out at the gap.
|
Thread Tools | |
Display Modes | |
| |