Bruiser/Mountaineer parts FS POSSIBLY

[badger]

I am planning on putting this stuff on ebay and was wondering if anyone on RCC is interested in some of these parts. If so then I will create a FOR SALE thread before they go to ebay.

Please DO NOT ask me how much or try to do deals in this thread. If you are interested then post up and I will create a for sale thread to give rcc members first dibs.

Items include:

3 speed tranny w/ 750 motor
Front and rear bumpers
original servos
MSC
receiver
front skid plates
electronics trays
roll bar
steering parts

[blazed]

i like the 3 speed tran. but what would my broke a44 use it for................hmmmmm... dont know but seems kinda kool :?

[ILoveRCRockCrawlin]

did bruisers have msc(mechanical speed control)

[blazed]

dont you see it in the pic?

[syco133]

No considering that they were made 20 years before you were born they had the best electronis speed control in them ever even better than the super rooster. yes they had a msc Heck my first stampede even had a msc.

[Destroyer]

Depending on the condition of the tranny/motor, I could be interested.

[badger]

Originally Posted by Destroyer

Depending on the condition of the tranny/motor, I could be interested.

I don't know the exact condition of the tranny since I have not actually mounted it in a working rig. It seems to shift fine but under load could be a completly different story.

It looks like I will put all the plastic **** on ebay and maybe post the tranny for sale here first.

Thanks.

[mudrinner4ever]

arnt thise trannys so u can shift from 2wd to 4wd? jw, id prolly be interested!!!!!!

Luke

[badger]

Originally Posted by mudrinner4ever

arnt thise trannys so u can shift from 2wd to 4wd? jw, id prolly be interested!!!!!!

Luke

Yes it has 2wd high, 4wd low, and 4wd high.

[Destroyer]

Originally Posted by badger

Yes it has 2wd high, 4wd low, and 4wd high.

No, it's 2-High, 2-Low, 4-Low.

Everybody always messes that up. Jeez

Unless you modify it of course...then it can have 4-High, 4-Mid, and 4-Low.

Destroyer

[badger]

Originally Posted by Destroyer

No, it's 2-High, 2-Low, 4-Low.

Everybody always messes that up. Jeez

Unless you modify it of course...then it can have 4-High, 4-Mid, and 4-Low.

Destroyer

You are correct, it has 2wd high and low, and 4wd low since this tranny is un-modified.

[NitroRC Ed]

Do you have a top for the electronics tray? Interested in that if you did - could not tell in the pic since they are upside down. The one on the left looks like it might. Also interested in the front skid.

Ed

[badger]

Originally Posted by NitroRC Ed

Do you have a top for the electronics tray? Interested in that if you did - could not tell in the pic since they are upside down. The one on the left looks like it might. Also interested in the front skid.

Ed

Yes I do have the cover to the electronics trays. I guess I will take better pics tonight and post them up here for a few days.

[NitroRC Ed]

That will work - will keep an eye out for your for sale thread.

Thanks,
Ed

[cstmp8r]

If I can get the servo lid...I will take that!! even if it's beat up a bit. I need one for my bruiser!! thanks

[mudrinner4ever]

Badger,
for the tranny for the bruiser, do u need the origanal controller to be able to shift the tranny?

[badger]

Originally Posted by mudrinner4ever

Badger,
for the tranny for the bruiser, do u need the origanal controller to be able to shift the tranny?

No you just need any 4 ch. stick radio. It makes it easier if you have the shift gate on the controller also.

[Destroyer]

Originally Posted by badger

No you just need any 4 ch. stick radio. It makes it easier if you have the shift gate on the controller also.

Yes, you definately want a shift gate, otherwise you will screw up the brass gears really quick. I made mine out of a thin piece of Alu sheet, held on by DS tape.

Destroyer

[mudrinner4ever]

ok, so if badger where to selll me that tranny i would need to go out and buy a 4 channel radio sence i only have a TQ3. is there any threads on how to do that or does someone have pics to show how to do that? that would be great sence im looking at buying the tranny anyways. just one more?, how do those trannys work for crawlin? thanxs a lot!!!!!

Luke

[badger]

Originally Posted by mudrinner4ever

ok, so if badger where to selll me that tranny i would need to go out and buy a 4 channel radio sence i only have a TQ3. is there any threads on how to do that or does someone have pics to show how to do that? that would be great sence im looking at buying the tranny anyways. just one more?, how do those trannys work for crawlin? thanxs a lot!!!!!

Luke

I will not sell you this tranny because you do not know what you are looking for. This tranny IS NOT the idea tranny for a crawler, and if you don't understand why then you need to do some reading.