| |
03-13-2006, 01:28 PM
| #1 |
| Rock Crawler Join Date: Nov 2005 Location: Winchester
Posts: 922
|  My hopped up rc18t
Here is my setup . I had do a lot of fileing and grinding to get the parts to work right . The universal drive would fit in to the ball diff. joint. When I got them to fit and I tried to run the truck it would roll riht over when you I tried to turn . SoI had to file down the pins on the universal so it would slide in and out of the diff. jont. It does not roll over at all now. Tell me what you think of my setup ? Hop up list Mamba 25 5400 motor Titanium turnbuckle set (associated #21055 ) Alloy 7075 main gear 57t (GPM # HAR057T) Alloy motor mount (Integy #INT T7610B Titanium hinge pins (GPM #TAR101) Aluminum suspension arms ( 3 racing # RC18-007/SI Rubber Seal ball bearing (Atomic AS01  Universal drive axles (Intecgy #INT T7601BLUE) Alloy diff. Joint set (GPM # AR080) Alloy rear arm mount (Intecgy INT T7602S) Alloy steering assy. (GPM #AR04 Front shock tower (3 Racing # RC18-005/SI) Rear shock Tower (3 Racing # RC18-0006/SI) Alloy Front bumper w/mount (Integy # INT T7611B) Rubber radial tire (GPM # SMT900L40G) Alloy 3d sinkage rims (GPM # SMT0627R) Parts on order Titanium Main center drive shaft ( GPM ) Titanium King Pin screws set Mighty micro servo with 75oz of torque with metal gears and ball bearings Super Differential (MPI)   MORE PHOTOS HERE |
|  |
| Sponsored Links | |
| | |
|
03-13-2006, 02:07 PM
| #2 |
| RCC Addict Join Date: Dec 2004 Location: Central NY
Posts: 1,980
|
Looks good, but looks can be deceiving. Get us a vid.
|
|
| |
|
03-13-2006, 03:20 PM
| #3 |
| MODERATOR™   Join Date: Jul 2004 Location: Ohio
Posts: 18,928
|
I have the CPB Monster Pack with Dean's connectors, MIP CVDs, steel turnbuckles, and FT shocks. I use mine for late night drunken figure 8 races.  I think you went a little crazy on yours!   |
|
| |
|
03-13-2006, 03:24 PM
| #4 |
| Rock Crawler Join Date: Nov 2005 Location: Winchester
Posts: 922
|
I think you went a little crazy on yours! Thats what my wife says about all my rc stuff. |
|
| |
|
03-13-2006, 03:32 PM
| #5 | |
| I wanna be Dave Join Date: Sep 2005 Location: *
Posts: 2,877
| Quote:
| |
|
| |
|
03-13-2006, 03:41 PM
| #6 |
| MODERATOR™ Join Date: Jul 2004 Location: Ohio
Posts: 18,928
|  First two empties are your "cones". Line up with a can, 3-2-1 go, we do a straight first, then start the figure 8. Hit a can and start over, hit 3 cans you lose. Sometimes hitting a can on purpose can help so you don't lose the race. Parts do break though, the head on collisions are hysterical! Good times! |
|
| |
|
03-13-2006, 03:50 PM
| #7 | |
| I wanna be Dave Join Date: Sep 2005 Location: *
Posts: 2,877
| Quote:
 | |
|
| |
|
03-13-2006, 10:59 PM
| #8 |
| Quarry Creeper Join Date: Oct 2005 Location: Bryant, AR
Posts: 463
|
I have a Mini LST with Tekin Mini Rage Extreme Brushles system, MIP ball diff, Dual Disk Slipper. Thats all my performance stuff on it, and to day at work one of the guys I work with has a 3 cell Lipo in his brushless Mini Quake, and he also has a 2 cell lipo. He let me try the 2 cell and it had about as much power that I think that I would want to mess around, but then he asked if I wanted to try the 3 cell and I said, yea sure, so I did and HOLY CRAP this thing flew. He said his Mini Quake will do close to 50, I've seen it go and I believe it, I know my Mini LST is faster than his Mini Quake if I use his 3 Cell. Unfortunatly I am comming down with the I gotta go LiPo sickness, but I am just going to get the Dynamite LiPo that is made for the Mini LST because the 3 cell gives it so much power that you need a parking lot to drive it, but is fun.
|
|
| |
|
03-14-2006, 11:06 AM
| #9 |
| Newbie Join Date: Sep 2005 Location: Anchorage
Posts: 43
|
Looks good. A few suggestions for parts tho. Scrap the Intejunk CVDs and get the MIP, they're alot tougher. Also the Lunsford turnbucles are alot tougher than the AE's, trust me, I've bent enough. I bash with it offroad and have raced it indoors on carpet. Mines built with- Lunsord punisher turnucles Mamba 6800 CBP monster pack with deans MIP CVDs CAW shock towers T-Bone bumpers front and rear (highly recommend) GPM shocks with AE blue springs for offroad and Racers Edge mini-turd shocks for onroad Airtronics 94091z Driven Productions Lunsford steering brace GPM alloy gearboxes and topbrace (gonna switch back to the plastic boxes but the brace helps with the diff gears NOT stripping on jumps) 75 mhz radio waterproofed electronics (it doubles as a submarine) 3Racing (?) sealed bearings Trinity monster offraods and losi foams Ti outdrives Ti hingepins |
|
| |
 |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
