Re: Pics of your latest purchase If you airbrush the mask on, that’s good for 3 or 4. If brushing a couple. A cheap harbor freight touch up gun is perfect for mask. https://www.harborfreight.com/adjust...gun-92126.html It will dry much quicker and even Hang up and Drive |
Re: Pics of your latest purchase Quote:
Thanks Pep |
Pics of your latest purchase Snap on dropped this off finally. https://uploads.tapatalk-cdn.com/201...65c1ddd0dc.jpg Sent from my iPhone using Tapatalk |
Re: Pics of your latest purchase Quote:
Tho, I think it would have been better blue, as opposed to purple. [emoji16][emoji1690] ~ More peace, love, laughter & kindness would make the world a MUCH better place |
Re: Pics of your latest purchase Quote:
Thanks. My last box (top and bottom cabinets) was blue with a red locker on the right side. Saw this color combination and couldn’t pass it up. Probably doesn’t help that my Snap-on dealer knows I like purple seeing how he told me about this set up before anyone else got a chance to see it. Sent from my iPhone using Tapatalk |
Re: Pics of your latest purchase Quote:
~ More peace, love, laughter & kindness would make the world a MUCH better place |
Re: Pics of your latest purchase "think I may have ordered to much liquid mask" Tell the wife it work on the face too, and soon you will have to reorder :mrgreen: |
Re: Pics of your latest purchase More parts arrived today. - VP VFD Hurtz DIG for the PRO - Team KNK SS screws for my Team Losi 22-4 restore - Bearing Kit from Jim’s Bearings for my Losi 22-4 - Team KNK SS screws for the Enduro https://uploads.tapatalk-cdn.com/201...8b578d5913.jpg Sent from my iPad using Tapatalk |
Re: Pics of your latest purchase The latest additions for my Capra...Yeah Racing Desert Lizard internal spring shocks, and a bunch of M3 nylock nuts (ok, so the nylock nuts will be used on multiple vehicles).https://uploads.tapatalk-cdn.com/201...df06fba31b.jpg Have to admit, these shocks are a little "unusual". I just opened one of the boxes, to get a 'quick peek', and discovered that the shock caps are on the bottom, as in, the ONLY shock body opening is on the bottom. Instead of filling work oil from the top, as every shock I've ever filled is done, you hold these upside-down, and fill from the bottom. Like I said, "unusual". ~ More peace, love, laughter & kindness would make the world a MUCH better place |
Re: Pics of your latest purchase 1 tons for the 1:1 GMC. https://live.staticflickr.com/65535/...3d7cb066_b.jpgUntitled by JASON MCKIMMEY, on Flickr |
Re: Pics of your latest purchase I don’t have pics but a used wraith cage, ssd wide axle and a long discontinued conversion just came in the mail. Will create a build thread when it’s further along Also picked up 2kg of filament and some graph paper for a build that I will be starting hopefully soon Sent from my iPhone using Tapatalk |
Re: Pics of your latest purchase 1 Attachment(s) Some paint tools, air brush has 3 tips, liquid flow adjustment, on the end of the brush. pep |
Re: Pics of your latest purchase Well after retiring from off-road racing 25 years ago, I got bit by the bug again! Hoping to get it built in time to do some indoor racing this winter. https://uploads.tapatalk-cdn.com/201...d9c6ddf8d7.jpg Sent from my iPad using Tapatalk |
Pics of your latest purchase Not much for $70 but should keep me busy. 3/8 and 1/2” breaker bars and one of those floppy ratchets. Should have my Tacoma tranny on deck tomorrow morning and hopefully back on by dark with a new clutch. https://uploads.tapatalk-cdn.com/201...7f7f323d4d.jpg |
Re: Pics of your latest purchase https://uploads.tapatalk-cdn.com/201...18b0c4997f.jpg Clearance Clarence!! For Moms Enduro! Hang up and Drive |
Re: Pics of your latest purchase Ender 3 Pro 3D printer arrived today. Setup and running the first test print. https://uploads.tapatalk-cdn.com/201...6267bf4e19.jpg Sent from my iPad using Tapatalk |
Re: Pics of your latest purchase Don’t print the Dog......... it’s a 10 hour print, and you won’t have enough filament. I just got a CR20Pro for $299, With the auto level I’m shocked how easy this one was! Yes I already had a good Cura Profile, and it works well. I’ve had great luck with 4.0, but failed with 4.4..... ????? No clue why. It took me a long time to get consistent prints, now, slice, load, print. I run Octoprint on both printers, makes testing quicker. Hang up and Drive |
Re: Pics of your latest purchase Quote:
I skipped past the dog and cat and printed the pig. The pig took 6 hours, but it looks really good for my first ever print. I bought a spool of Overture black PLA to practice with, so I’ve got plenty to work with for now. I’m a newb at this 3D printing, so everything you just mentioned just flew right over my head. [emoji1787] Tomorrow I plan on digging a little deeper into learning the software and printing some upgrades for the printer that I found on Thingiverse. Sent from my iPad using Tapatalk |
Re: Pics of your latest purchase New project just rolled into the shop! Well, not purchased, but received as a Christmas gift. These seemed to be one of the latest build crazes! https://uploads.tapatalk-cdn.com/202...4d5396b6cf.jpg Sent from my iPad using Tapatalk |
Re: Pics of your latest purchase Picked these up today, bought them for a R/C project I just started, but can use most of this on plastic model projects too"thumbsup" http://img.photobucket.com/albums/v6...pshxrpb7vu.jpg Also got this in the mail, it's just some inanimate carbon rod for the same project and why I bought the baby chop saw, figured that I may want to make a couple and that saw would be a whole lot quicker and cleaner than an X-Acto saw and Mitre Box set :mrgreen: http://img.photobucket.com/albums/v6...psdns5xtiy.jpg |
All times are GMT -6. The time now is 11:52 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com