Re: Pics of your latest purchase Quote:
|
Re: Pics of your latest purchase Quote:
~ More peace, love, laughter, & kindness would make the world a MUCH better place |
Re: Pics of your latest purchase Bowhouse lcg battery tray for trx4 sport SSD portal brass weights for trx4 sport Hyrax 1.9 Predator for trx4 sport SSD portal brass weights for my Capra https://i.imgur.com/vbWs60Yl.jpg |
Re: Pics of your latest purchase Quote:
|
Re: Pics of your latest purchase Hi! this is my latest purchase. Already after some modifications, more to come. http://rc-trial.pl/download/file.php?id=34912&mode=view |
Re: Pics of your latest purchase 1 Attachment(s) Some scale diamond plate sheets and some scale reading for the slow days in the garage |
Re: Pics of your latest purchase Well I finally picked up another one of these so I don’t have to keep bringing one from work home. https://uploads.tapatalk-cdn.com/202...042b5bc9a8.jpg Sent from my iPhone using Tapatalk |
Re: Pics of your latest purchase My Baja Rey is awaiting upgrades so got these to play with in the meantime. VXLs were for my son and BIL, the little EXC Roost is for my 6yo son. I'm liking the Mojave A lothttps://uploads.tapatalk-cdn.com/202...d9d3458dbe.jpg Sent from my LM-V600 using Tapatalk |
Re: Pics of your latest purchase I love my Mojave by far my favorite rig I own and a total beast. Have fun with your new toys. |
Re: Pics of your latest purchase Don’t have everything im yet but the no prep builds in the non crawler section have forced me to pick up a b6.2 and some sc6 chassis pieces along with other parts. Should hopefully have a build thread maybe this weekend or next weekend Sent from my iPhone using Tapatalk |
Re: Pics of your latest purchase |
Re: Pics of your latest purchase Quote:
Quote:
|
Re: Pics of your latest purchase Quote:
|
Re: Pics of your latest purchase Quote:
|
Re: Pics of your latest purchase I have a TrakStar tk955 station and replacement tips are fairly high. Dug a little bit and found an adaptor so it can take Hakko 9xx tips. Hakko tips are everywhere. https://uploads.tapatalk-cdn.com/202...ab4460b49c.jpg https://uploads.tapatalk-cdn.com/202...94414d4c66.jpg |
Re: Pics of your latest purchase https://uploads.tapatalk-cdn.com/202...6dfb41efdb.jpg 1.9 supershafty falcons for trx4 build with the killerbody lc70 https://uploads.tapatalk-cdn.com/202...2d7b5e95f8.jpg Wrap up next (WUN) m chassis conversion for a yokomo yd2 https://uploads.tapatalk-cdn.com/202...d50fe7063c.jpg Locked up rc axle upgrades for the Mojave monster and lc70 builds! Sent from my iPhone using Tapatalk |
Re: Pics of your latest purchase 1 Attachment(s) Have a Paasche airbrush to match. |
Re: Pics of your latest purchase Picked up a new Atomik Barbwire 3. Unfortunately, even though she was listed as 'new', she was actually the store's "display model", and there were several problems. In short, she was in need of a little "love & repair"...some of which I completed yesterday.https://uploads.tapatalk-cdn.com/202...7d331aae9c.jpg First, the coupler was stripped (crappy aluminum coupler, but using stainless steel grub screws). I could have just replaced the coupler, but I knew the same thing would keep happening...so, I felt a motor with a larger shaft would be more appropriate, as I could then get a SS coupler. However, that led to needing a more powerful ESC (the stock 30A wouldn't be enough)...so, a Seaking 60A was ordered as the replacement. Of course, the larger coupler required a larger diameter flex shaft, which, in turn, required a larger diameter stuffing tube. Second, the servo was underpowered (as is the case with most OEM servos)...so, a waterproof Savox micro servo was picked up from the LHS. Here's what she currently looks like inside:https://uploads.tapatalk-cdn.com/202...43d381fc88.jpg As mentioned, above, yesterday, I took care of most of the work. The electronics (except for the Rx, as I'll still be using the stock Tx & Rx) were replaced, the ESC was properly programmed, and everything was tested to make sure she's operational...and, she was. Now, just gotta wait for the rest of the parts to arrive from OSE (that's Offshore Electrics, for those not familiar with FE boating). She might be small (compared to my other boats),...but, once finished, she should be a sweet little "pocket rocket", easily topping 30mph. She's definitely NOT a "pool boat"...unless you're taking an Olympic-size pool. ~ More peace, love, laughter, & kindness would make the world a MUCH better place |
Re: Pics of your latest purchase |
Re: Pics of your latest purchase I ordered weird stuff for an rc build I’m working on. Like a 32 inch chassis, a dx8e and ar8010t reviver. What’s even stranger is a 6 degree of freedom robot arm Why would I order this stuff for the same build? Sent from my iPhone using Tapatalk |
All times are GMT -6. The time now is 12:41 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com