Pics of your latest purchase

[JatoTheRipper]

Originally Posted by pro mod steve

Straight up BAD ASS.

Thank you, sir!

Originally Posted by Zukiiholic

thought I'd try to get into SOME VPR driving.
Hooking up camera mount to a servo hooked into steering, in theory, it should

Cool! This has been on my to do list for a while.

[struhall]

Got some trading done, does that count? I traded my New Bright TJ roller for a SCX10-II roller with a Hilux body and a cut up Clod with a second SCX chassis. I feel like I came out ahead on the deal.

Doors are cut off but I am going to put them back on, just a little crooked like a door sagging. Bobbed bed with full drop bed already installed and almost finished. Figure it would make a good body for a busted trail truck.



Chassis has the trans flipped forward to fit the full drop bed on the body, and has the Dinky cantilever kit.



Clod body, hood scoop hole filled and rear of the body cut out for a mud truck. Going to end up with a flat bed unless I can find someone willing to sell the Clod bed super cheap.

[calcagno45]

Toyzuki mount

[Disco Stu III]

hope to build scale hubs with these for our 1.9 landcruiser 80 series.


Sent from my iPad using Tapatalk

[Peaker]

So the last couple of days have been good to me in regard to procuring stuff at least.

Today i got something in my mail box.
And then i hit the B&M store for a new ( NON RC ) charger.

Since i am a lazy bastard i figured i do a two in one picture.


And the day before yesterday i picked up my Blazer body at the painter ( my friend )



NO the rear axel are not snapped, but i lost control of flex back there so i better hit up the rear of the TF2 tomorrow, i have a sneaky feeling some oil in the shock absorbers will be a good thing.

[spookyseven]

I bought a basketcase of sherline stuff. One of my uncles is interested in the horizontal mill and lathe so I'm not sure if I'll keep them. The vertical mill needs work but I should be able to use it for some rc hackery.

[allanon1965]

Wife and I at our latest purchase... 1.023 acres to build our new home on! plenty of space in the back for a home crawler course

[Mike Flea]

Live steam engine, Rounhouse Sammie, arrived the other day

[DirtTrackDawG27]

Racing is a hell of a drug...


Sent from my iPhone using Tapatalk Pro

[BigSki]

1st new piece of outdoor equipment in a long time- 10.5 ft West Marine rec/fishing hybrid kayak. Had it out for 2 hrs this morning with a friend, getting a feel for it.

[BUBBA069]

Got a pack of these from AvE for fathers day gifts.





Etsy link if ya want some https://www.etsy.com/ca/listing/5304...op_home_feat_1

[Peaker]

I got a new batch, okay some of it i had for a little while now, but just picked up headset and mouse in B&M store.

There are some things in the backpack too, but that's strictly on a need to know basis and you guys and the internet as a whole do not need to know



Perhaps i should mention i have the HPI Venture on order, and so far it seem it will ship this week ( Thursday )

So ready to post a picture of that mofo here, as without it i am not driving unless its my 1:1 car

[canadianbacon]

Should be arriving in the next couple weeks

Skunk2 springs:



Godspeed Performance rear camber kit:



No, that's not to make it stanced and have -43* of camber, it's to correct the camber to factory settings. The springs should drop me 2.25" in the front, and 2" in the rear.

[Shinchu]

Civic? I have an frs on coilovers and rear lower arms.
Nice to see a fellow ricer here haha

Oh, and because thread title.
12 inch marvel legends DEADPOOL!
Actually found in the wild at toys r us in san diego. I about pooped when i saw it.
And yes, he comes with a chimichanga!



He joins 12 inch marvel legends spidey and iron man.
Tony hates when pete wears his helmet...

[canadianbacon]

Originally Posted by Shinchu

Civic? I have an frs on coilovers and rear lower arms.
Nice to see a fellow ricer here haha

Yeah, 2013 LX Coupe. Coilovers are out of my budget, but springs will do what I want. I don't want it slammed and scraping on everything like a ton of people like to do now, I just want it lowered lol. Stock shocks should hold up fine, I had on old Cobalt lowered on Sportlines that lasted as long as I had it on them.

[Peaker]

Got plenty of cameras ( got the SJ6 Legend and the SJ6 air in the mail yesterday )
Many thanks go out to SJcams for providing all these cameras

Now i just need a new car so i can go record stuff

[Shinchu]

Originally Posted by canadianbacon

Yeah, 2013 LX Coupe. Coilovers are out of my budget, but springs will do what I want. I don't want it slammed and scraping on everything like a ton of people like to do now, I just want it lowered lol. Stock shocks should hold up fine, I had on old Cobalt lowered on Sportlines that lasted as long as I had it on them.

I could tell it was a civic from the brands, and shape of the rear arms
My frs is safe to consider slammed lol
I have had drift cars for over a decade, but i dabled in hondas before that.
My first was an 89 civic hatch with zc swap. So fun! Would love to have another someday.

[c0bra]

Brand new team associated tc4 for a rwd conversion and other stuff. See thread in non crawler section


Also a planet eclipse etek 4 marker. I'm picking it up used from my neighbor this week, so figured I'd post anyway.


Sent from my iPhone using Tapatalk

[STANG KILLA SS]

[maslin]

Originally Posted by c0bra

Also a planet eclipse etek 4 marker. I'm picking it up used from my neighbor this week, so figured I'd post anyway.

Man I'd love to get back in to paintball, I need another hobby like a hole in the head.

I played a lot back 1998-2002 ish. Had a "really nice" Spyder, Warp feed minimag all built up, and a Angel LED with a freak barrel. I was in high school and could barely afford to play a day of rec ball, tried the comp stuff and couldn't keep up financially.

Was always jealous of the 30 something year old guys with real jobs and what appeared to be a lot of cash on hand, probably nothing compared to RC


Just browsed google, the "Resurrection" autococker is like $550... always wanted one.