Re: Pics of your latest purchase
 

If you airbrush the mask on, that’s good for 3 or 4.

If brushing a couple. A cheap harbor freight touch up gun is perfect for mask.


https://www.harborfreight.com/adjust...gun-92126.html

It will dry much quicker and even


Hang up and Drive

Re: Pics of your latest purchase
 

Good point, been messing around brushing it on. Like the touch up gun idea better. + good primer coat. Prefer to keep the air bush for top coat.



Thanks
Pep

Pics of your latest purchase
 

Snap on dropped this off finally. https://uploads.tapatalk-cdn.com/201...65c1ddd0dc.jpg


Sent from my iPhone using Tapatalk

Re: Pics of your latest purchase
 

That is WICKED!!!
Tho, I think it would have been better blue, as opposed to purple. [emoji16][emoji1690]

~ More peace, love, laughter & kindness would make the world a MUCH better place

Re: Pics of your latest purchase
 

Thanks. My last box (top and bottom cabinets) was blue with a red locker on the right side. Saw this color combination and couldn’t pass it up. Probably doesn’t help that my Snap-on dealer knows I like purple seeing how he told me about this set up before anyone else got a chance to see it.


Sent from my iPhone using Tapatalk

Re: Pics of your latest purchase
 

If I had a work area...actually, if I had a garage (currently 'stuck' with a carport...lol)...I'd love to have a set-up like that. I'm just not all that into purple...but, I do REALLY like black & blue. In the meantime, my trusty Target folding 2ft x 4ft adjustable-height table, the coffee table in the living room, and the bed (yes, sometimes I actually set up my "workstation" on the bed), will have to do.

~ More peace, love, laughter & kindness would make the world a MUCH better place

Re: Pics of your latest purchase
 

"think I may have ordered to much liquid mask"


Tell the wife it work on the face too, and soon you will have to reorder :mrgreen:

Re: Pics of your latest purchase
 

More parts arrived today.

- VP VFD Hurtz DIG for the PRO
- Team KNK SS screws for my Team Losi 22-4 restore
- Bearing Kit from Jim’s Bearings for my Losi 22-4
- Team KNK SS screws for the Enduro

https://uploads.tapatalk-cdn.com/201...8b578d5913.jpg



Sent from my iPad using Tapatalk

Re: Pics of your latest purchase
 

The latest additions for my Capra...Yeah Racing Desert Lizard internal spring shocks, and a bunch of M3 nylock nuts (ok, so the nylock nuts will be used on multiple vehicles).https://uploads.tapatalk-cdn.com/201...df06fba31b.jpg
Have to admit, these shocks are a little "unusual". I just opened one of the boxes, to get a 'quick peek', and discovered that the shock caps are on the bottom, as in, the ONLY shock body opening is on the bottom. Instead of filling work oil from the top, as every shock I've ever filled is done, you hold these upside-down, and fill from the bottom. Like I said, "unusual".

~ More peace, love, laughter & kindness would make the world a MUCH better place

Re: Pics of your latest purchase
 

1 tons for the 1:1 GMC.

https://live.staticflickr.com/65535/...3d7cb066_b.jpgUntitled by JASON MCKIMMEY, on Flickr

Re: Pics of your latest purchase
 

I don’t have pics but a used wraith cage, ssd wide axle and a long discontinued conversion just came in the mail. Will create a build thread when it’s further along

Also picked up 2kg of filament and some graph paper for a build that I will be starting hopefully soon


Sent from my iPhone using Tapatalk

Re: Pics of your latest purchase
 

Some paint tools, air brush has 3 tips, liquid flow adjustment, on the end of the brush.

pep

Re: Pics of your latest purchase
 

Well after retiring from off-road racing 25 years ago, I got bit by the bug again! Hoping to get it built in time to do some indoor racing this winter.

https://uploads.tapatalk-cdn.com/201...d9c6ddf8d7.jpg


Sent from my iPad using Tapatalk

Pics of your latest purchase
 

Not much for $70 but should keep me busy. 3/8 and 1/2” breaker bars and one of those floppy ratchets. Should have my Tacoma tranny on deck tomorrow morning and hopefully back on by dark with a new clutch.
https://uploads.tapatalk-cdn.com/201...7f7f323d4d.jpg

Re: Pics of your latest purchase
 

https://uploads.tapatalk-cdn.com/201...18b0c4997f.jpg

Clearance Clarence!!
For Moms Enduro!


Hang up and Drive

Re: Pics of your latest purchase
 

Ender 3 Pro 3D printer arrived today. Setup and running the first test print.

https://uploads.tapatalk-cdn.com/201...6267bf4e19.jpg


Sent from my iPad using Tapatalk

Re: Pics of your latest purchase
 

Don’t print the Dog......... it’s a 10 hour print, and you won’t have enough filament.
I just got a CR20Pro for $299,
With the auto level I’m shocked how easy this one was!
Yes I already had a good Cura Profile, and it works well. I’ve had great luck with 4.0, but failed with 4.4..... ?????

No clue why.

It took me a long time to get consistent prints, now, slice, load, print.
I run Octoprint on both printers, makes testing quicker.


Hang up and Drive

Re: Pics of your latest purchase
 

I skipped past the dog and cat and printed the pig. The pig took 6 hours, but it looks really good for my first ever print. I bought a spool of Overture black PLA to practice with, so I’ve got plenty to work with for now.

I’m a newb at this 3D printing, so everything you just mentioned just flew right over my head. [emoji1787]

Tomorrow I plan on digging a little deeper into learning the software and printing some upgrades for the printer that I found on Thingiverse.



Sent from my iPad using Tapatalk

Re: Pics of your latest purchase
 

New project just rolled into the shop!

Well, not purchased, but received as a Christmas gift.

These seemed to be one of the latest build crazes!

https://uploads.tapatalk-cdn.com/202...4d5396b6cf.jpg


Sent from my iPad using Tapatalk

Re: Pics of your latest purchase
 

Picked these up today, bought them for a R/C project I just started, but can use most of this on plastic model projects too"thumbsup"
http://img.photobucket.com/albums/v6...pshxrpb7vu.jpg

Also got this in the mail, it's just some inanimate carbon rod for the same project and why I bought the baby chop saw, figured that I may want to make a couple and that saw would be a whole lot quicker and cleaner than an X-Acto saw and Mitre Box set :mrgreen:
http://img.photobucket.com/albums/v6...psdns5xtiy.jpg

Re: Pics of your latest purchase
 

Over the past few months, I've had several conversations with my wrists...although, to be completely honest, they're more like lectures. Even worse, each one seems no different that the previous ones...almost like a broken record. They've typically gone something like this..........

Wrist: You're constantly working me hard. I do all these things for you, yet you never do anything for me. To tell ya the truth, I'm getting sick and tired of it. I've tried to tell you, numerous time, how hard you're working me, and all I can do is complain a baby causing you some pain. And, how do your repay me...by causing me to do more work. Well, I'm gonna tell you, if you don't start treating me better, I'm gonna get real nasty. You start treating me better, and I'll stay you better.

Me: Yea, I hear ya. I'll see what I can do to change.

Well, I'm here to tell ya, I finally listened. Dear, wrist, here ya go. Be happy now...and, get some rest.https://uploads.tapatalk-cdn.com/202...b9c7c8801b.jpg

~ More peace, love, laughter & kindness would make the world a MUCH better place

Re: Pics of your latest purchase
 

I got some opened, but never used Traxxas Traxx on eBay for a decent discount. When they arrived I was happy to see they shipped from Stormer Hobbies. I can't wait to try these out.

http://i.imgur.com/INbbOvPh.jpg

http://i.imgur.com/2ehDPbZh.jpg


I also got stiffer rear springs, heavier shock oil, rear link risers, portal over drive gears and a Hot Racing servo mount for my Capra.

The Castle B-Link is going to be used as a programming tool. I'll install it in a new vehicle and once it's set to where I'm happy I will transfer it to another truck. Sadly, they are too expensive to justify putting them in every RC that I have.

http://i.imgur.com/Ri9jXNih.jpg

Re: Pics of your latest purchase
 

My Pentathlons came up missing after a tourney, Sat eve, so I just ordered a set of these.

https://www.a-zdarts.com/mm5/graphic...ly_400x400.jpg

Link for anyone who cares: https://www.a-zdarts.com/25-sdrpsf-1...arts-18gm.html

Re: Pics of your latest purchase
 

I have been known to throw some darts around, did that a lot in the mid 80ties.
And was fairly decent at it if i have to say so myself. :mrgreen:

Pics of your latest purchase
 

500 American Ginseng seeds. Has anyone googled the health benefits or the going price in the right market? Phenomenal. It will be a long term project unfortunately.

https://uploads.tapatalk-cdn.com/202...f555a1e0cd.jpg

Re: Pics of your latest purchase
 

Figured it was time for one of these. Not sure if I want to try a diorama for it or just weather it yet:

https://images-na.ssl-images-amazon....AC_SL1500_.jpg

Re: Pics of your latest purchase
 

How can i upload image here, i was able to buy 4 room condo that i was able to purchase 1.5 years.

Re: Pics of your latest purchase
 

Through the Tapatalk app or you have to first upload your photos to an image hosting service, like Imgur, and then share their links on this forum.

Re: Pics of your latest purchase
 

Walked in my LHS looking for a few bits to make my own 6x6 from an extra SCX10.

http://www.rccrawler.com/forum/membe...4431-67612.jpg
$499. Couldn't pass it up.
Ordered new decals so I could do a respray later..

Still building my own 6X6..
Too deep into it to stop now.. LOL...

Re: Pics of your latest purchase
 

^^^ Nice! Great deal!

I got a Prusa i3 MK3S 3D printer kit.

http://i.imgur.com/XCkzONxh.jpg

Re: Pics of your latest purchase
 

New shoes for the squishy bike. :mrgreen:

https://i.imgur.com/fNUV6sp.jpg?1

Re: Pics of your latest purchase
 

Nice shoes, my 27.5 Turner wears the same.

I am stoked, a couple of weeks ago I bought my first 29er, a Knolly Fugitive LT. Knolly says about two more weeks before they ship it down to me. Cannot Wait!

Re: Pics of your latest purchase
 

Good to hear. Lots of the local guys swear by the combo for being good all around. Congrats on the new ride, I've always dug Knollys stuff. Short/mid travel bikes are so much fun everywhere!

Re: Pics of your latest purchase
 

Lots of parts to overhaul and build the ifs wraith 2.0!

https://uploads.tapatalk-cdn.com/202...d5ddef16f0.jpg

https://uploads.tapatalk-cdn.com/202...33d9b74442.jpg


Sent from my iPhone using Tapatalk

Re: Pics of your latest purchase
 

That combo is very popular here in central NC. The Yeti's we sell all come with them stock. They will work well for you

Re: Pics of your latest purchase
 

Also good to hear. You guys are making me anxious for my Wednesday night ride!

Re: Pics of your latest purchase
 

More ifs wraith 2.0 parts!

https://uploads.tapatalk-cdn.com/202...c0b959fdf4.jpg

This time a supershafty motor mount for the scx10 3 gear transmission, Robinson 32p spur, yeti diff outdrives and an incision link kit for the bomber.

The locked up slipper eliminator won’t work as I accidentally ordered one for a scx10ii kit transmission


Sent from my iPhone using Tapatalk

Re: Pics of your latest purchase
 

https://uploads.tapatalk-cdn.com/202...8238674cb7.jpg

Picked up a Kyosho mad crusher ve and already sold all of the ready to replace electronics


Sent from my iPhone using Tapatalk

Re: Pics of your latest purchase
 

Have you driven it yet? Just curious as to how it feels.

Re: Pics of your latest purchase
 

Now I haven’t driven it yet. I’m going to be replacing all of the electronics on it first


Sent from my iPhone using Tapatalk